Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 86 for “"strain rate effects"”.
-
Strain-rate effects in quartz sand
… to protect personnel and key assets from the effects of blast and fragmentation. The behaviour of soils in these extreme loading regimes is not well understood, and so designers require data at these high pressures and strain rates in order to develop robust soil constitutive models and adapt …
-
Strain rate effects on inelastic response of beams
Thesis (M.S.)--Michigan State University. Dept. of Civil Engineering, 1965
-
Strain rate effects in one-dimensional consolidation of peat
A series of one-dimensional strain rate controlled consolidation tests were performed on remolded peat to establish the void ratio - effective stress - strain rate relationship for this soil. The relationship was found to be independent of the size of sample. In addition, the void ratio - …
-
Modeling of strain rate effects on clay in simple shear
… SIMPLE DSS model is expanded to account for the effects of strain rate on clays in simple shear conditions. The response of clay soils is highly dependent on the rate of strain for both effective stress path and stress-strain behavior. The undrained shear strength is strongly influenced by strain …
-
Performance of narrow tillage tools with inertial and strain rate effects
… in crop production systems. Because of time constraints and large cropped areas, high-speed seeding operations are desirable. However, the increased draft and power requirements associated with high operating speeds are major factors limiting the speeds at which it is feasible to use tillage …
-
Study on Ductile Fracture with Anisotropic and Strain Rate Effects in Manufacturing Processes
… This dissertation addresses the anisotropic and strain rate effects in constitutive and ductile fracture models of lightweight metals. In the present modeling framework, the anisotropic plasticity behavior is modeled by combination of an initial anisotropic yield function and an isotropic …
-
Novel experimental split-Hopkinson techniques for characterising strain rate effects and thermomechanical behaviour
… experimental techniques developed to accurately characterise materials under high strain rate deformation, focusing particularly on thermomechanical effects. Conventional split Hopkinson methods have limitations when testing certain challenging materials such as low strength polymers, …
-
Temperature and Axial Strain Rate Effects on Micromechanical Behavior in Triaxially Compressed Marbles
… of high resolution, simultaneous stress-axial strain, volumetric strain, and acoustic emission measurements were used to survey the effects of temperature (T) and axial strain rate ((epsilon)) variations on micromechanical behavior in triaxially compressed marbles. Thirty-five tests were run on …
-
Microstructural and strain rate effects on stage III strain hardening and ductility in dual phase steels
Includes bibliographical references.
-
Microstructure and strain rate effects on the mechanical behavior of particle reinforced epoxy-based reactive materials
The effects of reactive metal particles on the microstructure and mechanical properties of epoxy-based composites are investigated in this work. To examine these effects castings of epoxy reinforced with 20-40 vol.% Al and 0-10 vol.% Ni were prepared, while varying the aluminum particle size from 5 …
-
Strain Rate Effects on a Ductile Moment Resisting Frame with RBS Connection Subjected to Seismic Ground Motions
A procedure has been developed to generate stress-strain curves for mixed-mode hardening plasticity model using test data by other researchers conducted at different strain rates for two grades of steel. The strain rate dependent material properties for these materials are used in different …
-
In-situ studies of strain rate effects on phase transformation and microstructural evolution in metastable β titanium alloys
… experimental techniques to understand strain rate effects on TRIP, TRIP/TWIP, and TWIP Ti alloys as a function of alloying, initial microstructure, and processing. A novel strengthening strategy for TRIP Ti-10V-2Fe-3Al (wt.\%) (Ti-1023) is explored by low-temperature aging to coarsen …
-
Rate Effects in Fine Grained Soils
The strain rate dependent behaviour of fine grained soils is an important aspect of geotechnical engineering. During dynamic or rapid events such as earthquakes and rapid pile testing, a fine grained soil will display significantly different behaviour than may be observed over the long life span of …
-
In-Situ Geotechnical Characterization of Soft Estuarine Surficial Sediments Using a Portable Free Fall Penetrometer
… empirical parameters such as the cone factor and strain rate factor hampered the derivation of geotechnical design parameters such as undrained shear strength. This challenge applies particularly in areas of more rare seabed soil conditions such as very soft estuarine sediments. This study aims to …
-
Behaviour of Cross-Laminated Timber Subjected to Blast Loading
… increase factor in order to quantify high strain rate effects on this material. Testing was completed on a total of 18 CLT panels, with panel thicknesses of 105 and 175 mm corresponding to a 3-ply and 5-ply panel, respectively. An average dynamic increase factor of 1.28 on the resistance …
-
Investigating the Behaviour of Glulam Beams and Columns Subjected to Simulated Blast Loading
… A shock tube capable of simulating high strain rates similar to those experienced during blast was used. Thirty-eight beams with three different cross-sections were tested statically and dynamically to establish the high strain rate effects (dynamic increase factor). Six columns were also …
Page 1 of 5