Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 6 of 6 for “"strand debonding"”.

  1. Influence of Strand Debonding on the Shear Strength of Prestressed Concrete

    Strand debonding is a common method used to reduce flexural stresses caused by prestress transfer in the end regions of pretensioned concrete beams. Debonding is especially useful when section geometries prohibit draping such as U-beams. Based on concerns regarding shear strength, the AASHTO bridge …

    purdue-thes Repository record for Influence of Strand Debonding on the Shear Strength of Prestressed Concrete (opens in a new tab)

  2. Effect of strand debonding on end cracking in pre-tensioned concrete beams

    Strand debonding is a common approach used to reduce cracking at the ends of pre-tensioned concrete beams. While the method has been successful to some extent, end cracking of pre-tensioned beam ends continues to be a problem. Experimental and numerical approaches were conducted in this study in …

    msu Repository record for Effect of strand debonding on end cracking in pre-tensioned concrete beams (opens in a new tab)

  3. Seismic Retrofit of Bridges Supported on Hollow Core Prestressed Concrete Pile-Columns

    … but rather by column cracking, followed by strand debonding. Review of the test results from the as-built specimen concluded that that specimen, too, had failed by strand debonding. Debonding failure proved to be non-ductile, because the strands buckled during the half-cycle following …

    washington Repository record for Seismic Retrofit of Bridges Supported on Hollow Core Prestressed Concrete Pile-Columns (opens in a new tab)

  4. Experimental and Numerical Investigation of End Zone Crack Control Strategies During Detensioning of Pretensioned Concrete Bulb-Tee Girders

    … caused by prestress force transfer from the strands into the concrete at beam ends. This issue begins during strand detensioning and is exacerbated when the beams are lifted from a precast bed. Typically, these cracks are small enough that they do not impact the strength limit state; however, …

    vt Repository record for Experimental and Numerical Investigation of End Zone Crack Control Strategies During Detensioning of Pretensioned Concrete Bulb-Tee Girders (opens in a new tab)

  5. Characterization and Modeling of Bond-Loss Behavior in Pretensioned Concrete I-Girders

    … the support that interrupts anchorage of the strands, leading to loss of bond and slipping of the strands relative to the concrete. It has been experimentally demonstrated that this failure type can occur at load levels that are lower than the nominal shear and flexural capacities. Because …

    clemson Repository record for Characterization and Modeling of Bond-Loss Behavior in Pretensioned Concrete I-Girders (opens in a new tab)

  6. Effect of partial debonding of prestressing strands on beam end cracking

    The use of shielded, or debonded, strands is an effective technique to reduce high tensile stresses in the end region of prestressed concrete members. However, damage in the ends of prestressed beams with shielded strands has been increasingly experienced during strand detensioning. Guidelines on …

    msu Repository record for Effect of partial debonding of prestressing strands on beam end cracking (opens in a new tab)