Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"structural ceramics"”.

  1. Laser Machining of Structural Ceramics: Computational and Experimental Analysis

    … and chemical stability have encouraged use of structural ceramics in several applications. The brittle and hard nature of these ceramics makes them difficult to machine using conventional techniques and damage caused to the surface while machining affects efficiency of components. Laser …

    utk-theses Repository record for Laser Machining of Structural Ceramics: Computational and Experimental Analysis (opens in a new tab)

  2. Role of cracks in creep of brittle, polycrystalline, structural ceramics

    … of cracks on creep of polycrystalline, brittle structural ceramics. Two independent mechanisms of contribution of cracks were defined. The mechanism of elastic creep by crack growth represents the rate of increase in strain, with time, resulting from the time-dependent decrease in elastic moduli …

    vt Repository record for Role of cracks in creep of brittle, polycrystalline, structural ceramics (opens in a new tab)

  3. SYNTHESIS AND CHARACTERIZATION OF NEXT-GENERATION MULTIPHASE SILICON NITRIDE-BASED STRUCTURAL CERAMICS

    This study demonstrated that Si2ON2/Si3N4/SiO2/BN ceramics can be produced using novel near-atmospheric processing techniques as compared to traditional high-pressure methods. Nitridation mixtures of Si, SiO2, and BN powders in a tube or graphite furnace with N2 gas flow yielded ceramics with …

    jhu Repository record for SYNTHESIS AND CHARACTERIZATION OF NEXT-GENERATION MULTIPHASE SILICON NITRIDE-BASED STRUCTURAL CERAMICS (opens in a new tab)

  4. Integrated Computational and Experimental Approach to Control Physical Texture During Laser Machining of Structural Ceramics

    … fabricate complex shapes on the hard and brittle structural ceramics, which previously had been near impossible to be machined effectively using various conventional machining techniques. In addition, the in-situ measurement of the thermo-physical properties in the severe laser machining …

    unt Repository record for Integrated Computational and Experimental Approach to Control Physical Texture During Laser Machining of Structural Ceramics (opens in a new tab)

  5. Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

    The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of …

    brazil-ufrn Repository record for Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural (opens in a new tab)

  6. Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

    … of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous …

    brazil-ufrn Repository record for Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais (opens in a new tab)

  7. Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos

    The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of …

    brazil-ufrn Repository record for Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos (opens in a new tab)

  8. Processing of CerLOMed Si₃N₄ components

    … prototyping method to manufacture advanced structural ceramics. Ceramics made by the CerLOM process can have improved properties compared to ones made by conventional methods. In this work, CerLOMed Si₃N₄ samples were used to study the relationship between the heat treatment conditions and …

    iastate Repository record for Processing of CerLOMed Si₃N₄ components (opens in a new tab)

  9. Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

    … same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, …

    brazil-ufrn Repository record for Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas (opens in a new tab)

  10. Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

    … in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at …

    brazil-ufrn Repository record for Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural (opens in a new tab)

  11. Incorporação de resíduos industriais para produção massa cerâmica

    … 10 °C / min and a plateau 30 minutes to obtain structural products and other ceramic thermal cycle of 1080 °C and 1180 °C at a heating rate of 10 °C / min and a plateau of 10 minutes , for obtaining products of ceramic coating. After thermal testing models were again subjected to analysis of x - …

    brazil-ufrn Repository record for Incorporação de resíduos industriais para produção massa cerâmica (opens in a new tab)

  12. Design, Development, and Testing of a Miniature Fixture for Uniaxial Compression of Ceramics Coupled with In-Situ Raman Spectrometer

    … compression stage and Raman system will enable structural characterization of ceramics and ceramic composites. The in-situ compression stage incorporates a 440C stainless steel structural components, 6061 aluminum frame, a NEMA 23 stepper motor. Two load screws that allow to apply compressive …

    ucf Repository record for Design, Development, and Testing of a Miniature Fixture for Uniaxial Compression of Ceramics Coupled with In-Situ Raman Spectrometer (opens in a new tab)

  13. Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador

    … consumers along with the competitiveness of the structural ceramic sector has driven forward a number of recent efforts and investments towards improving the quality of structural ceramics. In this scenario, the present study focused on sampling and evaluating the conformity of 8-hole …

    brazil-ufrn Repository record for Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador (opens in a new tab)

  14. Desenvolvimento de cerâmicas com alta sinterabilidade à base de Nano Alumina reforçada com CBC produzidas por tape casting

    … the research and manufacture of new advanced and structural ceramics seems to favor the use of high purity and ultrafine powders combined with shorter sintering time and lower sintering temperature. Compositions with oxides aides (Cu2O, CuO, TiO2, MgO, B2O3, SiO2, K2O, Na2O, Li2O, ZrO2, ZnO) and …

    brazil-ufrn Repository record for Desenvolvimento de cerâmicas com alta sinterabilidade à base de Nano Alumina reforçada com CBC produzidas por tape casting (opens in a new tab)

  15. Estudo do potencial refratário de argilas sílico-aluminosas do Rio Grande do Norte

    The segment of the structural ceramics industry is one of the most important to the economy of Rio Grande do Norte. The supply chain makes a total of 206 companies that are distributed in 39 counties, concentrated in three regional centers: Seridó Apodi / Assu and great Natal. The ceramic industry …

    brazil-ufrn Repository record for Estudo do potencial refratário de argilas sílico-aluminosas do Rio Grande do Norte (opens in a new tab)

  16. A indústria da cerâmica vermelha e os índices de extremos climáticos para os estados do Rio Grande do Norte e Paraíba

    … with the implantation of micro and small Ceramics companies throughout Brazil. There were, however, no precautions regarding the use of the natural resources used as raw material source for the Industry. In this way, we investigated the indications of micrometeorological alterations …

    brazil-ufrn Repository record for A indústria da cerâmica vermelha e os índices de extremos climáticos para os estados do Rio Grande do Norte e Paraíba (opens in a new tab)

  17. Šiuolaikinių keramikos konservavimo metodų kūrimas ir pritaikomumo tyrimas /

    … our times. When performing the conservation of ceramics, it is important not only to select such conservation substances that would ensure the unchanged appearance and chemical composition of a cultural object, but also to protect it effectively against the harmful impact of external …

    vilnius Repository record for Šiuolaikinių keramikos konservavimo metodų kūrimas ir pritaikomumo tyrimas / (opens in a new tab)

  18. Development and application of new methods for the conservation of ceramics /

    … our times. When performing the conservation of ceramics, it is important not only to select such conservation substances that would ensure the unchanged appearance and chemical composition of a cultural object, but also to protect it effectively against the harmful impact of external …

    vilnius Repository record for Development and application of new methods for the conservation of ceramics / (opens in a new tab)

Page 1 of 2