Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 570 for “"strut"”.

  1. Strength evaluation of strut-purlins

    Diaphragm braced strut-purlins are commonly used in the roof systems of metal buildings. However, the design problem of combined uplift and axial loads on these members is not adequately addressed in the 1989 AISI specification. The objective of this thesis is to provide experimental evidence that …

    vt Repository record for Strength evaluation of strut-purlins (opens in a new tab)

  2. Heat Transfer in an Airfoil Shaped Strut

    … passing over the outside of an airfoil shaped strut to a cool secondary flow stream passing through the inside of that strut was studied experimentally and numerically. The results showed that the heat transfer on the inside of the strut could be reliably modeled as a developing flow and …

    queens Repository record for Heat Transfer in an Airfoil Shaped Strut (opens in a new tab)

  3. Investigation of duralumin channel section strut under compression

    This investigation has clearly established the fact that, for sections built up straight line elements, theoretical calculations can be made with a degree of accuracy sufficient for practical application and will be on the conservative side.

    nps Repository record for Investigation of duralumin channel section strut under compression (opens in a new tab)

  4. Strut-and-tie model design examples for bridge

    Strut-and-tie modeling (STM) is a versatile, lower-bound (i.e. conservative) design method for reinforced concrete structural components. Uncertainty expressed by engineers related to the implementation of existing STM code specifications as well as a growing inventory of distressed in-service bent …

    texas Repository record for Strut-and-tie model design examples for bridge (opens in a new tab)

  5. Nonlinear structural analysis using strut-and-tie models

    Increasing popularity of the strut-and-tie methodology among research communities and practising engineers is due to its rational analytical approach and its superiority, compared to the conventionally employed empirical methods for analysing disturbed regions in structural systems. Nevertheless, …

    auckland-ms Repository record for Nonlinear structural analysis using strut-and-tie models (opens in a new tab)

  6. Aerodynamic design optimization of a non-lifting strut

    … to design the optimum airfoil for a non-lifting strut-like application. This is achieved by combining the governing laws of aerodynamics with appropriate numerical models to simulate an inputted steady flow regime. By using a robust yet simple parameterization method to represent airfoils and by …

    manitoba Repository record for Aerodynamic design optimization of a non-lifting strut (opens in a new tab)

  7. Development of a Hi-Per strut front suspension

    … Hi-Per suspension is a variant of the MacPherson strut suspension, with the difference of a steered knuckle and a rigid damper strut. In a MacPherson suspension the whole damper and knuckle assembly is steered, limiting the position of the steering axis by the body mounts of the strut. The …

    chalmers Repository record for Development of a Hi-Per strut front suspension (opens in a new tab)

  8. Thermal stress analysis of a strut with geometric discontinuity

    <p>An unrestrained strut with geometric discontinuities is subjected to a nonuniform thermal loading and is analyzed for stress. The geometric discontinuities are three holes drilled through the strut parallel to its axial direction. Two separate thermal loadings are applied to the strut. The first …

    ut-knoxville Repository record for Thermal stress analysis of a strut with geometric discontinuity (opens in a new tab)

  9. Structural analysis and deployable development of cable strut systems

    Cable strut systems have been widely developed around the word. In aspect of structural analysis, though the finite element method has been a popular analysis tool, simplified analysis method is still desired by many engineers as a quick way of estimating the response. In aspect of systems, …

    nus Repository record for Structural analysis and deployable development of cable strut systems (opens in a new tab) Download file for Structural analysis and deployable development of cable strut systems (opens in a new tab)

  10. Deployable tension-strut structures: Concept, structural behaviour and implementation

    … In this thesis, a series of Deployable Tension-Strut Structures is developed to resolve this limitation. Structural morphology of the proposed systems is studied to provide a basis for design creation algorithm which allows automatic creation of various forms of Deployable Tension-Strut …

    nus Repository record for Deployable tension-strut structures: Concept, structural behaviour and implementation (opens in a new tab) Download file for Deployable tension-strut structures: Concept, structural behaviour and implementation (opens in a new tab)

  11. Investigation of lattice structures and analysis of strut geometry.

    … steel powder, and mechanically tested. The strut diameter of each topology was altered to yield four different mass reductions from a solid cube, ranging from 55%-90% mass reduction. Three iterations of 1000mm3 lattice specimens were investigated. The first iteration consisted 0.5mm plates …

    louisville Repository record for Investigation of lattice structures and analysis of strut geometry. (opens in a new tab)

  12. Magnetorheological Strut for Vibration Isolation System of Space Launcher

    Práce se zabývá návrhem magnetoreologické (MR) vzpěry vibroizolačního systému (VIS) pro kosmický nosič. V rešeršní části jsou popsány vybrané VIS a vzpěry těchto systémů, které byly v kosmických nosičích využity v minulosti. Každá z těchto vzpěr obsahující kapalinu byla těsněna pomocí statických …

    brno-tech Repository record for Magnetorheological Strut for Vibration Isolation System of Space Launcher (opens in a new tab)

  13. Assessment of RANS Turbulence Models for Strut-Wing Junctions

    … Design Optimization (MDO) studies show the Strut/Truss Braced Wing (SBW/TBW) concept has the potential to save a significant amount of fuel over conventional designs. For the SBW/TBW concept to achieve these reductions, the interference drag at the wing strut juncture must be small compared …

    vt Repository record for Assessment of RANS Turbulence Models for Strut-Wing Junctions (opens in a new tab)

  14. Multidisciplinary Design Optimization of a Strut-Braced Wing Aircraft

    … 0.85 over a range of 7,380 nmi. Several single-strut configurations were optimized for minimum takeoff gross weight, using eighteen design variables and seven constraints. The best single-strut configuration shows a 15% savings in takeoff gross weight, 29% savings in fuel weight, 28% increase in …

    vt Repository record for Multidisciplinary Design Optimization of a Strut-Braced Wing Aircraft (opens in a new tab)

  15. The effect of Strut Chordae severance on marginal chordae tension

    … The effect of surgical procedures, such as strut chordae cutting and chordae transposition to relieve mitral regurgitation is not yet fully known. Chordae tension is important to understand mitral regurgitation. Further studies on the mitral valve chordae tension could minimize diagnosis …

    ttu Repository record for The effect of Strut Chordae severance on marginal chordae tension (opens in a new tab)

  16. Evaluation of strut-and-tie modeling for bridge pier applications

    Strut-and-tie modeling is an analysis and design tool for reinforced concrete elements which assumes that internal stresses are transferred through a truss type mechanism. The tensile ties and compressive struts serve as truss members connected by nodal zones. The internal truss idealized by the …

    wvu Repository record for Evaluation of strut-and-tie modeling for bridge pier applications (opens in a new tab)

  17. Automatic design of concrete structures using a strut & tie approach

    … in this thesis is an investigation of the strut and tie method for designing 2-D in-plane, reinforced concrete structures. Two important issues relating to this method are addressed. Firstly, the issue of visualising an appropriate strut and tie model is dealt with. In many situations it …

    glasgow Download PDF for Automatic design of concrete structures using a strut & tie approach (opens in a new tab)

  18. Photoelastic Studies of a Square Strut with a Spheroidal Cavity

    … in three-dimensional photoelasticity of a square strut with a spheroidal cavity under axial compression and an attempt to use the scattered light method for this problem. Stress distributions along several lines are presented and the experimentally determined stress concentration factors of the …

    marquette Repository record for Photoelastic Studies of a Square Strut with a Spheroidal Cavity (opens in a new tab)

Page 1 of 29