Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"sub-6 GHz"”.
-
Transmitter designs for sub-6 ghz and millimeter wave bands
… 5G mobile network, two kind of frequency bands, sub-6 GHz bands and millimeter-wave bands above 24 GHz, are classified. Due to the densely packed spectrum in sub-6 GHz bands, the transmitter designs have focused on improving spectral efficiency with frequency-localized waveforms such as …
-
Using Lenses for Improved Sub-6 GHz Massive MIMO Full-Duplex
… full-duplex base-stations operating in 3.5 GHz Citizens Broadband Radio Service (CBRS) band.We experimentally demonstrate that practical lens designs can reshape the beam patterns of the antenna array to improve the “focus” of the main lobe while reducing the power in the side lobes. The …
-
Fully Integrated GaN MMIC Power Amplifier Design for Sub-6 GHz 5G Applications
… from United Monolithic Semiconductor (UMS) for sub-6 gigahertz (GHz) wireless applications, centered at 3.6 GHz. This first ever fully integrated RMDB PA MMIC provides excellent gain flatness 10.5 dB (±0.5 dB) across 3.4 to 4.0 GHz bandwidth (BW) and delivers an output power of 39 …
-
Broadband Linearity-Enhanced Doherty Power Amplifier Design Techniques for 5G Sub-6 GHz Applications
… new 5G frequency bands were allocated at sub-6 GHz and instantaneous signal bandwidths were increased to satisfy the rapidly growing needs for increased data rates. Furthermore, 5G uses more complex modulation schemes to improve spectrum efficiency. Finally, 5G introduced massive multiple …
-
Physical Layer Techniques for Massive MIMO Sub-6 GHz LoS and Millimetre-Wave Transmission
… wireless systems. This thesis focuses on sub-6 GHz line-of-sight (LoS) transmissions in massive MIMO systems, which not only fulfil a variety of applications, such as small-cell back-haul but also provide a longer coherent time as the LoS channel varies more slowly and can be readily …
-
Design and Analysis of 5G/IoT Antennas for sub-6 GHz Applications using Characteristic Modes Analysis.
… del 5G se ha producido en las bandas denominadas sub-6 GHz debido a su compatibilidad con la infraestructura ya desplegada. Una de las novedades del 5G es la subdivisión en pequeñas celdas que requerirá la instalación de puntos de acceso interiores mediante antenas de múltiples puertos, altamente …
-
Context-Aware Resource Management and Performance Analysis of Millimeter Wave and Sub-6 GHz Wireless Networks
… over heterogeneous frequency bands spanning both sub-6 GHz microwave and high-frequency millimeter wave (mmW) frequencies bands. This heterogeneous ecosystem will yield new challenges and opportunities for wireless resource management. On the one hand, resource management can exploit user and …
-
Reduction of Crosstalk Distortion in 5G - Relaxed Isolation-based Linearization for sub-6 GHz Advanced Antenna Systems
… investigations led to a conclusion that, in sub-6 GHz, it would be impossible to relax the isolation level if the PA model that does not count for cross-talk coupling is used. In contrast, when counting for cross-talk coupling in the PA behavioral model, isolation level is relaxed to about 11 …
-
On Enabling Virtualization and Millimeter Wave Technologies in Cellular Networks
… frameworks for building virtual networks in sub-6 GHz and mmW bands. Towards developing the frameworks, first, we derive a closed-form expression for the downlink rate coverage probability of a typical sub-6 GHz cellular network with known base station (BS) locations and stochastic user …
-
Co-Existing Antennas in Modern Handsets
… multiple-input multiple-output (MIMO) systems at sub-6 GHz frequencies. Furthermore, 5G introduces new millimeter-wave (mm-wave) frequencies in which more bandwidth is available for high-capacity communications. A common factor for both frequency ranges is that handsets should be equipped with …
-
Millimeter wave link configuration using out-of-band information
… coming from (i) lower frequency (i.e., sub-6 GHz) communication channels, and (ii) mmWave radar. Sub-6 GHz frequencies are a feasible out-of-band information source as mmWave systems are deployed with low-frequency systems (for control signaling or multi-band communication). Similarly, …
-
Analysis of millimeter wave and massive MIMO cellular networks
… analyze the system-level performance of mmWave, sub-6 GHz massive MIMO, and mmWave massive MIMO cellular networks. The proposed models capture the key features of each technique, and allow for tractable signal-to-interference-plus-noise ratio (SINR) and rate analyses. In the first contribution, I …
-
Investigation and design of 5G antennas for future smartphone applications
… for 8×8 MIMO configuration is proposed for sub 6 GHz 5G applications. The proposed MIMO configuration could improve the channel capacity, diversity function, and multiplexing gain of the smartphone antenna system which makes it suitable for 5G applications. Different types of new and compact …
-
Integrated Transmitters for Cellular User Equipment–Wideband CMOS Power Amplifiers and Antenna Impedance Tuners
… that the electronics inside the cellphone works sub-optimally, and a decrease in radio performance is inevitable, resulting in increased power consumption and reduced data rates. This problem can, however, be reduced by a concept called adaptive antenna impedance matching. This compensates for …
-
Simulation, Design and Implementation of Antenna for 5G and beyond Wave Communication. Simulation, Design, and Measurement of New and Compact Antennas for 5G and beyond and Investigation of Their Fundamental Characteristics
… the most critical challenges. As a result, for sub-6 GHz 5G applications, a new design technique based on dual-polarised antenna resonators for 6-Element, 8-Element MIMO configuration is proposed. The proposed MIMO design could improve the smartphone antenna system's chan-nel capacity, diversity …
-
A LOW-POWER AND LOW-JITTER ANALOG FREQUENCY SYNTHESIZER FOR 5G WIRELESS COMMUNICATION AND IoE/IoT APPLICATIONS
… two branches according to their frequencies: (i) sub-6 GHz (700 MHz to 6 GHz) and (ii) near-millimeter wave (25 to 30 GHz). Commonly used applications are included in the sub-6 GHz, also called the Internet-of-Everything (IoE) and Internet-of-Things (IoT). To fulfill the date rate required for 5G …
-
Estudo de uma metodologia de reconfiguração aplicada no desenvolvimento de filtros planares de microondas ajustáveis
… to the communication standards of 5G NR sub-6 GHz, with model 01 being a banstop filter, and models 02 and 03, bandpass filters. Studies, analyzes and simulations in a lossless transmission line and in microstrip technology are carried out using tools based on the equivalent circuit …
-
Space-Saving Antenna Solutions for Mobile Devices
… second space-saving design is an eight-element sub-6 GHz multiple-input multiple-output antenna design that is suitable for a smartphone with a highly desirable full edge-to-edge screen and metal rim. Its compact size (17.9mm × 7mm) is achieved by bending the antenna slots. Due to three excited …
-
Enhanced WLAN Performance with New Spectrum at 60 GHz and Visible Light
To enhance the WLAN operation at sub-6 GHz, research has been directed towards utilizing new spectral bands including millimeter waves (60 GHz) and visible light spectrum. The 7-14 GHz unlicensed band at 60 GHz can enable multi-gigabit rate applications including live HD video streaming, virtual …
-
Broadband highly efficient linear millimeter-wave medium-power power amplifier design
… mobile network’s FR2 band (i.e., 24.25 to 52.6 GHz) is currently used to support eMBB (enhanced Mobile Broadband) applications to achieve 10+ Gb/s download peak speed, and sub-1mS latency for the UR/LL, mMTC (ultra-reliable machine type communication) applications. The RF (radio-frequency) power …
Page 1 of 5