Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 733 for “"subsonic"”.
-
Subsonic intake duct flows
Here both S-shaped and singly curved (here classified as S-shaped) duct diffusers for intakes in aeronautical propulsion systems are studied. The results are applicable in other situations where similar ducts occur; for example on V/STOL aircraft employing re-direction of thrust, intercomponent …
-
Transonic and subsonic boundary layer icing
… for aircraft icing is considered for high subsonic and transonic Mach numbers. A boundary layer formulation is developed for the airflow for the low Mach number limit. From the computation of self-similar low Mach number Falkner-Skan solutions past a wedge and full compressible boundary …
-
The transition from subsonic to supersonic cracks
… around a crack tip as crack speed changes from subsonic to supersonic. Subsonic cracks feature displacement fields consistent with a stress intensity factor. For supersonic cracks, the stress intensity factor disappears. Subsonic cracks are characterized by small-amplitude, high-frequency …
-
Compressible subsonic flow on a staggered grid
… The method works well in modelling flows in the subsonic range that normal incompressible techniques do not capture and where compressible methods are inefficient. We have also investigated adapting these techniques to granular elastic-plastic flow.
-
Aeroacoustic interactions of installed subsonic round jets
Additional noise sources are generated when an aircraft engine is mounted beneath a wing. The two main installation sources include: (1) reflection of the exhaust jet mixing noise from the underside of the wing, and (2) interaction between the turbulent jet plume and the trailing edge of the wing, …
-
Computational investigation of subsonic torsional airfoil flutter
In this thesis single-degree-of-freedom torsional airfoil flutter is investigated using an incompressible potential flow code, a compressible inviscid Euler code and a compressible viscous Navier-Stokes code. It is found that the classical linearized incompressible and compressible flow theories …
-
Application of panel methods for subsonic aerodynamics
Several panel methods are developed to model subsonic aerodynamics. The vorticity panel method for two-dimensional problems is capable of handling general unsteady, potential, lifting flows. The lifting surface is modelled with a vortex sheet and the wakes by discrete vortices. As an imitation of …
-
Large eddy simulation of subsonic mixing layers
… to study the large-scale structures in a low subsonic mixing layer and their breakdown to small scales. For 3-D simulations, different finite-difference and pseudo-spectral schemes are tested. The (2, 4) MacCormack Scheme developed by Gottlieb and Turkel (1976) shows the best overall …
-
Heat transfer effects on a subsonic delta wing
With the advent of the "Space Shuttle" concept, it has become necessary to study the effects of heat transfer on the aerodynamic and boundary layer characteristics of a heated delta wing. Thus, a symmetrical 60° delta wing was tested up to twice freestream temperature in the Virginia Tech 6' x 6' …
-
A numerical model of unsteady, subsonic aeroelastic behavior
A method for predicting unsteady, subsonic aeroelastic responses has been developed. The technique accounts for aerodynamic nonlinearities associated with angles of attack, vortex-dominated flow, static deformations, and unsteady behavior. The angle of attack is limited only by the occurrence of …
-
Application of the Hydraulic Analogy to Internal Subsonic Flow
… of the hydraulic analogy when applied to subsonic internal flows such as exist in pure fluid elements. The study included a literature survey, an analytical investigation of the hydraulic analogy, and an experimental test program to measure the degree of correlation between an air and …
-
Multi-quadrant performance simulation for subsonic axial flow compressors
… multi-stage axial flow compressors operating at subsonic conditions. This implies that the delivery pressure and power requirements must be predicted for different mass flow rates and rotational speeds while operating in the first and fourth quadrants on the compressor performance charts. …
-
Breakup characteristics of a liquid jet in subsonic crossflow
This thesis describes an experimental investigation of the breakup processes involved in the formation of a spray created by a liquid jet injected into a gaseous crossflow. This work is motivated by the utilization of this method to inject fuel in combustors and afterburners of airplane engines. …
-
Acoustic Resonance in a Cavity under a Subsonic Flow
Acoustic resonances leading to high unsteady pressure levels may occur in flow past cavities. The resonance involves a coupling between the downstream-propagating instability wave on the shear layer spanning the open face of the cavity, and acoustic waves propagating within and external to the …
-
Instabilities and subharmonic resonances of subsonic-heated round jets.
… is increased. Furthermore, compressibility at subsonic Mach numbers has a moderate stabilizing influence on the subharmonic instability modes. Heating suppresses moderately the subharmonic growth rate of an axisymmetric mode, and it reduces more significantly the corresponding growth rate for …
Page 1 of 37