Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"substrate orientation"”.
-
Influence of Substrate Orientation on Feeding Kinematics of Algae Grazing Lake Malawi Cichlid Fishes
… of mbuna, we quantified feeding kinematics on substrates at different orientations that mimicked the top, sides, and bottoms of the algae covered boulders these species feed from in the wild. Significant differences in kinematics were found among the species, and several of the kinematic …
-
The effects of substrate orientation and color on survival and growth of freshwater prawn Macrobrachium rosenbergii
… and circular tanks to determine the effects of orientation and color of added substrate. In the rectangular tanks (400L), 2000 prawn, with a mean initial weight of 0.05 grams per animal, were nursed for 65 days at 25.5°C (78°F). Brown polyester mesh netting (6 X 6 mm) was added to each of the …
-
ENZYME ACTIVE SITE DYNAMICS AND SUBSTRATE ORIENTATION PROBED VIA STRONG ANHARMONIC COUPLING IN AN ARYL-AZIDE VIBRATIONAL LABEL USING 2D IR SPECTROSCOPY
… interactions between the enzyme, cofactors, and substrate that poise the system to access a productive transition state. Motions on a variety of timescales contribute to this, but some controversy exists surrounding the role of ultrafast dynamics on catalysis. Site-specific 2D IR spectroscopy …
-
Attenuated Total Reflectance – Fourier Transform Infrared Spectroscopy Analysis of Pulsed Electron Deposited Silicon Dioxide Film on Silicon Substrate
… films, had the best IR characteristics. The Si substrate orientation also affected the SiO2 film. The {100} substrate orientation preformed worse than the {111} orientation.
-
A structural study of BiFeO3 - PbTiO3 thin films deposited by pulsed laser deposition
… thin films deposited onto Pt/TiOx/SiO2/Si substrates by pulsed laser deposition. The effect of substrate orientation, film composition and film thickness are described as well as the growth mechanisms and interactions at the substrate â�� film interface. The pulsed laser deposition …
-
Microstructural studies of vapor-deposited nickel/ceramic composites
… ($<$1 micrometer) metallic films on a ceramic substrate. The two major aspects of this research are: (1) the investigation of the effects of ion bombardment on the nucleation behavior and growth morphologies of the films, as well as the development of any film/substrate orientation …
-
MBE GROWN ALUMINUM OXIDE AND ALUMINUM-GALLIUM OXIDE THIN FILMS FOR BETA-GALLIUM OXIDE POWER DEVICES
… successfully achieved on (-201) oriented β-Ga2O3 substrates. The effect of substrate orientation, Al flux and post dielectric deposition annealing on properties of MBE grown Al2O3 dielectrics is also studied. This single chamber process of depositing metal/oxide/semiconductor structure could …
-
Physical characterization of lithium niobate thin films on silicon substrates
The structure and orientation of radio frequency sputtered lithium niobate (LiNbO$\sb3$) films on silicon substrates is determined using x-ray diffraction. The structure of the LiNbO$\sb3$ films is determined to be a strong function of the substrate temperature. The preferred crystal orientation of …
-
Processing and characterization of RF sputtered alumina thin films
… glass, single crystal silicon and graphite substrates by RF sputtering. Though standard, amorphous Al₂O₃ films are readily soluble in hot phosphoric acid, these sputtered films exhibited only reluctant etchability by the acid. Experiments were initially performed to understand the parameters …
-
Modelling Air Bubble Entrapment and Transport in Sprayed Liquid Films
… between the droplets and the solid surface. The substrate orientation and liquid-solid contact angle influence the number of bubbles remaining in a liquid film. Once liquid motion stops, buoyancy forces drive the bubbles towards the substrate for a downward facing substrate. Depending on the …
-
Electrical and thermal characterisation of β-Ga<sub>2</sub>O<sub>3</sub> devices
… was observed as a function of device orientation relative to the substrate. Raman measurements of the substrate orientation demonstrated that this anisotropy did not correlate with the underlying substrate orientation across two sample sets. The variation in on-resistance was …
-
VO2 material study and its application for terahertz modulation
… hetero-epitaxial structure. Moreover, the substrate orientation (c-, r- and m-cut sapphire) influence on structural, electrical and THz properties of VO2 thin films was also systematically studied , and r-cut samples displayed the best THz modulation performance. Finally, the electrical and …
-
Simulation of Engineered Nanostructured Thin Films
… transport of atoms from the vapor source to the substrate is modeled as random ballistic deposition, incorporating the dynamic variation in substrate orientation that is central to the GLAD technique, and surface adatom diffusion is modeled as either an activated random walk (MC), or as energy …
-
Thermally Aware Design Approaches for High Power Density Ultra-Wide Bandgap Power Electronics
… by investigating the device layout such as substrate orientation, configuration of electrodes (number of fingers, channel width, location of metallization pads), dielectric heat spreader, and thermal boundary conductance between metal and β-Ga2O3.
-
Indium gallium arsenic phosphide/gallium arsenide quantum well lasers: Material properties, laser design and fabrication, ultrashort-pulse external-cavity operation
… Optimization of the growth process and the substrate orientation resulted in a significant reduction of the LCM. Additionally, a comprehensive analysis of the optical constants was performed which resulted in the first publication of wavelength and composition dependent index of refraction …
-
Mechanisms of film formation during micro-cold spray of ZnO ceramics
… to produce an aerosol and accelerated towards a substrate through a nozzle. The impulse for acceleration occurs by means of a pressure differential between near atmosphere upstream of the nozzle to low vacuum at the nozzle outlet. Processing parameters for MCS-produced films are dependent on …
-
Role of offcut and spall direction in surface morphology of spalled (110) GaAs, The
… the terrestrial PV market is hindered by high substrate cost. Controlled spalling of substrates provides a path towards substrate reuse with potential to reduce manufacturing cost. Controlled spalling works by propagating a sub-surface crack, parallel to the substrate surface, by applying an …
-
Photoemission Studies of Thin Metallic Overlayer Systems
… to study Ag(111) monolayers on six different substrates: Ni(001), Ni(111), Cu(001), Cu(111), Au(111), and Si(111)-(7x7). The properties of surface states were also examined for several related systems: Cu(111) covered by various thicknesses of Ag, and a bare Cu(332) stepped surface. Monolayer …
-
Photoemission studies of thin metallic overlayer sytems
… to study Ag(lll) I monolayers on six different substrates: Ni(OOl), Ni(lll), Cu(OOl), Cu(lll), Au(lll), and Si(lll)-(7x7). The properties of surface states were also examined for several related systems: Cu(lll) covered by various thicknesses of Ag, and a bare Cu(332) stepped surface. Monolayer …
-
Advancing the Industrialization of Thin Film Deposition: Tools for Mitigating Powder Formation in Spatial-ALD Systems and for Real-time, In-situ Metrology
… including precursor concentration, reactor-substrate gap spacing, and temperature, on powder formation. A novel powder quantification module, based on exhaust filter resistance measurements, enables systematic investigation of these parameters. This approach was used to identify optimal …
Page 1 of 3