Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"subsurface deformation"”.
-
Investigation of surface and subsurface deformation in sliding wear
… time. Metallographic observation of the plastic deformation that occurred on the surface of a specimen corresponded to the results obtained by the laser technique.
-
On the characterisation of subsurface deformation microstructures in aerostructural titanium alloys
… programme has been undertaken to investigate the subsurface deformation microstructures in aerostructural titanium alloys that result from industrial surface finishing processes. Microstructural analysis of the region immediately below the treated surface has been performed for high speed machined …
-
Shallow subsurface deformation along the Pen Branch Fault in South Carolina: interpretation from seismic refraction stack sections
… the fault is believed to be. The lines possess deformation such as offsets, upwarping and channels. Deformation can be related to the Pen Branch Fault as shallow as 4 m from the surface. Displacements along the lines vary from 1 m up to 5 m. Reverse sense of motion is mainly exhibited along the …
-
Subsurface deformation micromechanisms induced during machining of titanium alloys at low temperatures, and a novel testing methodology to examine their machining behaviour
… identified, which is the characterisation of the subsurface microstructural evolution during plastic deformation in the machining of titanium alloys. Besides, its impact on surface integrity needs to be investigated in detail. The aims of this PhD research were (1) To determine the “machinability” …
-
Investigation of Electrotribological and Arc Erosion Behavior of Cu-15vol.%Cr in situ Composite
… level of electrical current. The sliding-induced subsurface deformation occurred not only in the sliding direction but also in the lateral directions perpendicular to the sliding direction. The complex deformation mode was revealed clearly by the morphological change of the ribbon-like filaments. …
-
Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components
… of cutting parameters on the surface integrity, subsurface microstructure, tool wear and fatigue performance for finish milling of Ti-5Al-5Mo-5V-3Cr landing gear components. Low cost, small scale testing methodologies have been developed to replicate complex machining strategies employed in …
-
Landslide deformation character inferred from terrestrial laser scanner data
… (PIV) method is implemented to derive 3D surface deformation fields using TLS point-cloud data. Associated errors are estimated and the method's performance is tested with synthetic displacements applied to a TLS dataset. The method is applied to the toe of the episodically active Cleveland Corral …
-
Surface form memory by indentation-planarization training of NiTi shape memory alloys
Shape memory alloys respond to deformation by indentation with strong two-way cyclic displacements on heating and cooling. Shallow indents can vanish on heating, and deeper indents will change depth when thermally cycled. In the present work, following indentation by an added step of surface …
-
Investigation of Neotectonic Activity within the Shallow, Unconsolidated Stratigraphy of the Pearl River Delta Area, Louisiana
… century researchers have suggested that active deformation driven by neotectonic activity has locally influenced areas of southeastern Louisiana in the form of wetland loss and coastal erosion. This study, within the Pearl River Delta Area of Louisiana, applied geomorphologic and stratigraphic …
-
Evaluating the Machinability of Titanium Alloys, Timetal 407 and Ti-6Al-4V
… characteristics; tool wear, chip control, subsurface deformation and cutting forces. The key to these tests was to remain low cost, offering a quick turnaround of results relative to high speed machining, in order to filter out a large number of alloy chemistries and microstructural …
-
The sedimentary record of seafloor uplift
… such as uplift and subsidence. The vertical deformation of the seafloor and subsurface influences sedimentary systems, hydrocarbon distribution, paleoclimate archives, and poses significant geohazard risks. This thesis investigates the different origins, evolution, and impacts of various …
-
Opening history and porosity evolution of fractures in sandstone, Triassic to Jurassic La Boca Formation, Northeast Mexico
… outcrops that can be reliably attributed to subsurface deformation contain cements, some retain open pore space whereas others have been sealed. Quartz cement within otherwise open fractures contains crack-seal textures that record fracture opening history. Elsewhere otherwise identical …
-
Machinability of Single-phase Materials : Surface integrity and tool wear analysis
… Different aspects of surface integrity such as subsurface deformation, surface defects and damage are discussed. Such analysis relied on extraction, polishing, and examination of the machined samples with nanoindentation and SEM microscopy. Screening tests of several different tooling solutions …
-
Tribological and arc erosion behaviors of copper-refractory metal in situ composites
… of composition, filament orientation, true deformation strain, sliding speed and annealing temperature. The Cu-20 vol.%Nb composite had the best wear resistance among the compositions studied in both cases. Subsurface deformation was revealed by the presence of filaments and was one of the …
-
Gradient microstructure control in deformation-based surface generation
… microstructure by surface severe plastic deformation (S2PD) has been shown as an effective process to enhance functional performance and extend the service life of engineering components. The imposed gradient in strain results in a graded nanostructured material with an average grain size …
-
Crustal xenoliths from Potrillo Maar: Implications for evolution of continental crust beneath the southern Rio Grande rift
… folding in some of the marble xenoliths suggests subsurface deformation that has not been observed in local surface exposures of metasedimentary rocks. One model proposed for the crust under the southern Rio Grande rift assumes that the marble is late Paleozoic in age. The fossiliferous limestones …
-
Chip formation and metal cutting performance when using non-plane rake face tools
… surface, and the effect on surface roughness and subsurface deformation of cutting with negative lands is determined, The results indicate that for given cutting conditions at values of primary rake angle less than a particular value, sidespread of the workpiece is pronounced, This results in …
-
Three Dimensional Modeling of Ti-Al Alloys with Application to Attachment Fatigue
… models that account for their complex microdeformation mechanisms. Alpha/beta Ti-Al alloys are dual-phase in nature consisting of a mixture of hcp (alpha) and bcc (beta) crystal structures, which through variation in alloying elements and/or processing techniques can be produced in a wide …
-
Quasi-static Loading Effects on a Mar shalling Yard Calibration of a Creep-SCLAY1S Model Using Satellite and In Situ Measurements
… for anisotropy, bonding and rate-dependent deformation, making it well suited for the soft Gothenburg clay conditions at the site. Model parameters were calibrated using site-specific oedometer and triaxial test data, supplemented by theoretical relationships and literature values for …
Page 1 of 2