Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 101 for “"superplastic"”.
-
Optimizing superplastic response in NAVALITE
Superplastic ductilities up to 428 percent have been attained during research into thermomechanical processing of Al-2.70Mg-2.04Li-0.50Cu-0.13Zr (compositions in wt.pct.; alloy composition corresponding to NAVALITE). Variation in dislocation density induced by means of warm rolling at a series of …
-
Techniques For Forming Superplastic Alloys
<p>The field of superplasticity is reviewed, with particular reference to the mode of deformation and viability for industrial application. Superplastic and conventional Zn-Al eutectoid alloys are compared with regard to the pressures and time required and the problems associated with the …
-
Rate-Dependent Mechanics of Superplastic Processes
<p>Superplasticity is a hot-working phenomenon exhibited by many metallic alloys and observed above a temperature of about 40% of the absolute melting point. It is characterized by an ultra-fine grain microstructure, an unusually high rate dependence and very low resistance to deformation at low …
-
Superplastic creep in the lead tin eutectic
An extensive creep study of a superplastic material has not previously been made. The present study was carried out to determine if there are any basic differences between the creep of coarse grained materials and fine grained super-plastic materials. The results give information about the …
-
Grain boundary development in superplastic aluminum alloys
Superplasticity may be defined as the capability of certain polycrystalline materials to deform to extensive plastic elongations prior to failure, often without formation of a neck. Typically, superplasticity refers to tensile elongations greater than 200%, although some elongations have been …
-
Laser die-less forming of superplastic materials
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1998
-
Friction stir welding of commercially available superplastic aluminium
… and obtain the best possible microstructure for superplastic Forming (SPF). Therefore the main goal is to produce friction stir welds which do not fail during subsequent SPF processes. The friction stir welds have been created using novel tools which are oversized for the material thickness used; …
-
Superplastic behaviour of sheet materials under biaxial stresses
The deformation of a superplastic zinc-aluminium eutectoid alloy is examined by subjecting thin circular diaphragms to one-sided hydrostatic pressure at elevated temperature. The geometry, the stress, the strain, and the strain-rate are determined at various points covering the whole specimen and …
-
The deformation kinetics of a superplastic zinc-aluminum alloy.
The deformation behavior of a commercial near eutectoid zinc-aluminum alloy was studied by subjecting standard tensile specimens to stress relaxation experiments at constant temperatures between 258 0K to 344 0K. To satisfy the constant strain condition of such experiments, the testing machine was …
-
Friction stir processing of AS-CAST AA5083 Superplastic response
… rate and elongation was established. A maximum superplastic elongation of ~550% was obtained at a strain rate of 3 x 10-3 s-1. The formation mechanism of refined grain structure and the superplastic characteristic of FSP material will be discussed in this paper
-
Microstructural and superplastic characteristics of friction stir processed aluminum alloys
… of this research was to establish microstructure/superplasticity relationships in FSP aluminum alloys. Different aluminum alloys (5083 Al, 2024 Al, and Al-8.9Zn-2.6Mg-0.09Sc) were friction stir processed for investigating the effect of alloy chemistry on resulting superplasticity. Tool rotation …
-
Superplastic shaping of colloidal ceramics with saccharides and dicarboxylic acids
Traditional methods for the shape-forming of engineering ceramics entail plastic deformation of powder slurries containing hazardous organic liquids as suspending media. Large concentrations of these liquids, exceeding 50 volume per cent, are needed to provide sufficient plasticity during molding …
-
Superplastic Deformation in a Eutectic Alloy of Cadmium and Zinc
Made available in DSpace on 2014-12-10T17:57:54Z (GMT). No. of bitstreams: 1 7021017.pdf: 3796774 bytes, checksum: 556364aa0488e60397ccdc61ee268ded (MD5) Previous issue date: 1970
-
Modeling and Experimental Analysis of Superplastic Forming and Diffusion Bonding
Superplastic forming and diffusion bonding is a well-established manufacturing process. It has been implemented with a variety of materials. This work specifically deals with titanium which, while being a very useful aerospace material, and is commonly used with both superplastic on diffusion …
-
Deformation enhanced grain growth in a superplastic Sn - 1% Bi alloy
… has been studied to determine the effects of superplastic deformation on the grain growth kinetics. Using both constant crosshead speed and creep tests, the grain size was measured as a function of deformation time and strain over a wide range of strain rates. It was found that during …
Page 1 of 6