Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"surface segregation"”.

  1. SURFACE SEGREGATION IN YTTRIA-STABILIZED ZIRCONIA (YSZ)

    … present PhD thesis aims to study the effect of segregation of selected lattice components on surface and near surface chemical composition of polycrystalline yttria–stabilized zirconia (YSZ) (10 mol% Y2O3), at elevated temperatures in the gas phase of controlled oxygen activity. The aim of the …

    unsw Repository record for SURFACE SEGREGATION IN YTTRIA-STABILIZED ZIRCONIA (YSZ) (opens in a new tab)

  2. Surface Segregation Of Branched Polymeric Additives In Polymer Host

    … makes major contributions to understand the surface segregation of branched polymeric additives in linear polymer host by both simulation and experiments. Firstly self-consistent field(SCF) lattice simulation was used to study the entropic effect of architecture of polymer additives on their …

    cornell Repository record for Surface Segregation Of Branched Polymeric Additives In Polymer Host (opens in a new tab)

  3. Surface Segregation in Binary Polymer Blends due to Stiffness Disparity

    The main objective of this work is to study the surface segregation of a binary polymer blend, where the two components have the same molecular volume but are different in other properties such as end-to-end distance, stiffness, and length. Two models are used to represent the polymer chain, which …

    waterloo Repository record for Surface Segregation in Binary Polymer Blends due to Stiffness Disparity (opens in a new tab)

  4. Surface Segregation on Co-Rh and Oxidation of Ni-Co Alloys

    … systems, Co-Rh and Ni-Co, were used to study surface segregation and oxidation phenomena on binary alloys.</p> <p>Cobalt was found to sputter preferentially from five Co-Rh alloys ranging in composition from 19.3 to 84.7 at % Rh when irradiated by 4 keY Ar⁺ ions. Surface segregation …

    mcmaster Repository record for Surface Segregation on Co-Rh and Oxidation of Ni-Co Alloys (opens in a new tab)

  5. The Surface Segregation and Initial Stages of Oxidation on Ni-Co Alloys

    … out on the Nickel-Cobalt alloy system. The surface segregation behaviour has been studied over the range of composition from 14 to 90 atomic percent Nickel using Auger Electron Spectroscopy (AES). An analysis procedure has been developed that is based on computer simulation of observed …

    mcmaster Repository record for The Surface Segregation and Initial Stages of Oxidation on Ni-Co Alloys (opens in a new tab)

  6. Controlling surface segregation and tuning silver ion release of reactively sputtered Ag/TiOx nanocomposites

    … studies on such coatings showed unavoidable segregation of silver out to the surface, which results in direct exposure of the potentially harmful Ag nanoparticles (NPs) to the environment and could also lead to a rapid depletion of the Ag source. Moreover, potentially harmful silver NPs are …

    cau-kiel Repository record for Controlling surface segregation and tuning silver ion release of reactively sputtered Ag/TiOx nanocomposites (opens in a new tab)

  7. The effects of evaporation rate, solvent, and substrate on the surface segregation of block copolymers

    The surface chemistry of two systems of block copolymers was studied using angular dependent X-ray Photoelectron Spectroscopy poly(dimethyl (XPS). Surface concentration siloxane-b-sulfone)/polysulfone profiles of [PDMS/PSF] blends cast at several rates of solvent evaporation, and cast on several …

    vt Repository record for The effects of evaporation rate, solvent, and substrate on the surface segregation of block copolymers (opens in a new tab)

  8. Surface segregation in strontium doped lanthanum cobalt ferrite: effect of composition, strain and atmospheric carbon dioxide

    … and ionic conductivity, and reasonable oxygen surface exchange coefficient. However, LSCF can have long-term stability issues such as surface segregation of Sr during SOFC operation, which can adversely affect the electrochemical performance. Thus, understanding the nature of the Sr surface …

    bu Repository record for Surface segregation in strontium doped lanthanum cobalt ferrite: effect of composition, strain and atmospheric carbon dioxide (opens in a new tab)

  9. Binary Alloy Surfaces: Surface Segregation and the Effects of Ion Bombardment on the Surface Composition of Cr-Mo Alloys

    … of the relationship between binary alloy surface composition and the externally controllable parameters of irradiating conditions, temperature and bulk composition.</p> <p>The Cr-Mo binary system was used as the model system as it provides appreciable differences in the driving forces …

    mcmaster Repository record for Binary Alloy Surfaces: Surface Segregation and the Effects of Ion Bombardment on the Surface Composition of Cr-Mo Alloys (opens in a new tab)

  10. Silicon Carbon(001) Gas-Source Molecular Beam Epitaxy From Methyl Silane and Silicon Hydride: The Effects of Carbon Incorporation and Surface Segregation on Growth Kinetics

    … is due to a complex interaction among competing surface reactions. During growth of the initial Si-rich sublayer, C strongly segregates to the second layer resulting in charge transfer from surface Si atom dangling bonds of to C backbonds. This, in turn, decreases the Si2H6 sticking probability …

    uiuc Repository record for Silicon Carbon(001) Gas-Source Molecular Beam Epitaxy From Methyl Silane and Silicon Hydride: The Effects of Carbon Incorporation and Surface Segregation on Growth Kinetics (opens in a new tab)

  11. A theoretical study of surface kinetic processes in the Mbe growth of compound semiconductors

    The surface kinetics processes in the molecular beam epitaxy (MBE) growth of GaAs (100) and the MBE doping kinetics are studied theoretically, using a stochastic model which is based on the master equation approach and random distribution approximation. The kinetic processes included in the model …

    unlv Repository record for A theoretical study of surface kinetic processes in the Mbe growth of compound semiconductors (opens in a new tab) Download PDF for A theoretical study of surface kinetic processes in the Mbe growth of compound semiconductors (opens in a new tab)

  12. Self-Assembly and Surface-Patterning of Polymer-Functionalized Nanoparticles

    … of polymer-functionalized nanoparticles, the surface-segregation of their polymer ligands to generate patchy nanocolloids, and the use of patchy and non-patchy polymer-functionalized nanoparticles as building blocks for self-assembly. In Chapter 3, the self-assembly of nanospheres uniformly …

    toronto-retro Repository record for Self-Assembly and Surface-Patterning of Polymer-Functionalized Nanoparticles (opens in a new tab)

  13. Aerosol Synthesis and Characterization of Heterogeneous Bimetallic Nanoparticles

    … dispersing the material properties over greater surface to volume ratios. Emerging quantum effects at the nanoscale present unique tweaking opportunities in applications. This thesis deals with creating and characterizing heterogeneous nanoparticles, including Janus and core-shell nanoparticles: …

    lund Repository record for Aerosol Synthesis and Characterization of Heterogeneous Bimetallic Nanoparticles (opens in a new tab) Download PDF for Aerosol Synthesis and Characterization of Heterogeneous Bimetallic Nanoparticles (opens in a new tab)

  14. Aerosol Generated Core-shell Nanoparticles : Synthesis and Characterization

    … vapor deposition (PVD) by evaporation, and surface segregation via thermal treatment. Using a novel aerosol PVD design with a local heater to decouple shell material heating from the aerosol, Zn condensation on Au core particles was studied and compared to a simple model based on kinetic gas …

    lund Repository record for Aerosol Generated Core-shell Nanoparticles : Synthesis and Characterization (opens in a new tab) Download PDF for Aerosol Generated Core-shell Nanoparticles : Synthesis and Characterization (opens in a new tab)

  15. Oxygen Reduction Reaction on Dispersed and Core-Shell Metal Alloy Catalysts: Density Functional Theory Studies

    Pt-based alloy surfaces are used to catalyze the electrochemical oxygen reduction reaction (ORR), where molecular oxygen is converted into water on fuel cell electrodes. In this work, we address challenges due to the cost of high Pt loadings in the cathode electrocatalyst, as well as those arising …

    tamu Repository record for Oxygen Reduction Reaction on Dispersed and Core-Shell Metal Alloy Catalysts: Density Functional Theory Studies (opens in a new tab)

Page 1 of 6