Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"suspension geometry"”.

  1. The effect of active forces on Wheel Suspension Kinematic Design parameters

    For passenger cars, passive suspension systems are designed to adapt to a wide range of driving conditions and hence, vehicle suspension design is associated with certain trade-offs between several vehicle attributes (ride comfort and road holding, to name one). Active suspensions however, gives …

    chalmers Repository record for The effect of active forces on Wheel Suspension Kinematic Design parameters (opens in a new tab)

  2. Design of a suspension system for a formula student race car

    … this thesis is to design, optimize and build the suspension system for the 2018 car. To be able to design a suspension system background research will be performed to understand the theory behind the suspension geometry and what results should be expected by changing the suspension geometry with …

    reykjavik Repository record for Design of a suspension system for a formula student race car (opens in a new tab)

  3. DEVELOPMENT OF A HIGH-SENSITIVITY THZ-TO-IR FOCAL PLANE ARRAY FOR ENHANCED IMAGING APPLICATIONS

    … including dielectric material selection and suspension geometry. Replacing silicon nitride with silicon dioxide and anchoring the sensor element with a two-leg structure instead of four-leg from previous designs increased simulated responsivity from 0.3 K/μW to approximately 5 K/μW, with …

    nps Repository record for DEVELOPMENT OF A HIGH-SENSITIVITY THZ-TO-IR FOCAL PLANE ARRAY FOR ENHANCED IMAGING APPLICATIONS (opens in a new tab)

  4. Steering actuator sizing of prototype electric one-seater

    … Furthermore, the model allows the prediction of suspension geometry influence on steering torque amplitude. The steering effort is analyzed by means of maximum expected tire forces, which are estimated by a simple physical tire model. In the tire model maximum tire-to-ground friction is estimated …

    chalmers Repository record for Steering actuator sizing of prototype electric one-seater (opens in a new tab)

  5. Quarter car rig for software function development of fully active suspension and continuously controlled dampers

    … performance and results. Nowadays, fully active suspension (FAS) is a solution which can improve balance between ride comfort and handling. Currently, there’s lot of competition going on in an automotive market, especially because of electric vehicles. Checking the effect of FAS in the early …

    chalmers Repository record for Quarter car rig for software function development of fully active suspension and continuously controlled dampers (opens in a new tab)

  6. Optimal Vehicle Path Generator Using Optimization Methods

    … tire wear test path, perform parametric study of suspension geometry design using vehicle dynamics handling test data, and to increase repeatability in generating track testing results. <i> Vita removed at author's request. GMc 3/13/2013</i>

    vt Repository record for Optimal Vehicle Path Generator Using Optimization Methods (opens in a new tab)

  7. Magneto-Rheological Dampers for Super-sport Motorcycle Applications

    … the topics of MR dampers and motorcycle suspensions, and why the two would be a good combination. A detailed history of MR fluids, MR dampers, and motorcycle suspension technologies is given next. After a broad outline of MR dampers and motorcycle suspensions, the method of designing and …

    vt Repository record for Magneto-Rheological Dampers for Super-sport Motorcycle Applications (opens in a new tab)

  8. Dynamic analysis of a tracked snowplowing vehicle and assessment of ride quality

    … dynamics, track-terrain interaction, road wheel suspension, snowplowing forces, road wheel-track interactions, secondary suspension and biodynamic behavior of the driver. An in-plane twelve-degrees-of-freedom ride dynamic model of the vehicle is developed. The ride dynamic response of the model …

    concordia Download PDF for Dynamic analysis of a tracked snowplowing vehicle and assessment of ride quality (opens in a new tab)

  9. Parametric Design and Optimization of an Upright of a Formula SAE car

    … lies the upright—a critical component of its suspension system. The upright serves to link the suspension arms to the wheels, effectively transmitting steering and braking forces to the suspension setup. Achieving optimal performance requires finding the right balance between lightweight …

    vt Repository record for Parametric Design and Optimization of an Upright of a Formula SAE car (opens in a new tab)

  10. Electric Sports Car Preliminary Design (Performance Envelope)

    … studied in vehicle dynamics was front-view suspension geometry analysis. Taking the available packaging and geometry into consideration, a 2D model was done in SolidWorks to optimize camber gain. This analysis gave the motion ratio of the front and rear pushrod suspension system which was …

    iupui Repository record for Electric Sports Car Preliminary Design (Performance Envelope) (opens in a new tab)

  11. Technical Concept Study of an Electric Motorcycle Model

    … developing the problem definition. A frame and suspension geometry together with a set of tyres to begin the practical testing with. It also resulted in a battery pack enclosure design which would help keeping the cost of the swappable battery packs low. A model for estimating the required …

    chalmers Repository record for Technical Concept Study of an Electric Motorcycle Model (opens in a new tab)

  12. Torque split between left and right drive shaft over a front wheel drive differential

    … cause these problems: propulsion, steering and suspension. Torque steer contributors are not only the differential (friction, self locking effect, Torsen differential), but also the input from the ground and car geometry such as road conditions (friction and surface), the vehicle state …

    chalmers Repository record for Torque split between left and right drive shaft over a front wheel drive differential (opens in a new tab)

  13. Kineto-Dynamic Analyses of Vehicle Suspension for Optimal Synthesis

    Design and synthesis of a vehicle suspension is a complex task due to constraints imposed by multiple widely conflicting kinematic and dynamic performance measures, which are further influenced by the suspension damper nonlinearity. In addition, synthesis of suspension for hybrid vehicles may …

    concordia Download PDF for Kineto-Dynamic Analyses of Vehicle Suspension for Optimal Synthesis (opens in a new tab)

  14. Multi-Body Vehicle Dynamics Modeling for Drift Analysis

    … was developed to simulate the influences of suspension parameters on vehicle drift. Adams 2010 was chosen as the multi-body dynamics (MBD) software for this research for its ability to develop a full vehicle high fidelity model without the need for physical test data. The model was created …

    waterloo Repository record for Multi-Body Vehicle Dynamics Modeling for Drift Analysis (opens in a new tab)

  15. Koncepce vozidel SxS

    Cílem této bakalářské práce je vytvořit vlastní koncepční návrh vozidla SxS. Práce je rozdělena do tří hlavních částí. První část se sestává z rešerše, kde jsou podrobně rozebrány jednotlivé typy náprav používaných u SxS vozidel, jejich specifika vůči běžným typům zavěšení a následně jsou porovnány …

    brno-tech Repository record for Koncepce vozidel SxS (opens in a new tab)

  16. Traction control for electric vehicles with independently driven wheels

    … software tool. The model includes the full suspension geometry of the vehicle. Pacejka's "Magic Formula" is used for the tyre model. The model is validated using Delta Motorsport's E4 coupe.</p> <p>The two Wheel Independent Drive (2WID) MTTE-based traction controller is derived from the …

    oxford Repository record for Traction control for electric vehicles with independently driven wheels (opens in a new tab)

  17. Podvozek velomobilu

    Diplomová práce se zabývá problematikou konstrukčního řešení náprav a systému řízení velomobilu. V rešeršní části práce je provedeno konstrukční rozdělení velomobilů podle počtu kol. Dále jsou analyzovány základní geometrické parametry zavěšení přední nápravy a zpracován přehled jednotlivých …

    brno-tech Repository record for Podvozek velomobilu (opens in a new tab)

  18. Zavěšení zadních kol s velkým zdvihem

    Táto diplomová práca sa zaoberá problematikou zadného zavesenia kolies s veľkým zdvihom pri vozidlách kategórie Side-by-Side (SSV). Úvodná časť práce je venovaná základným parametrom geometrie podvozku, prenosu zaťaženia a špecifikám vozidiel SSV. Následne sú popísané koncepcie zadných náprav …

    brno-tech Repository record for Zavěšení zadních kol s velkým zdvihem (opens in a new tab)

  19. Měření odklonu kola během jízdy

    Cílem této diplomové práce je navrhnout měření a následně změřit změnu úhlu odklonu kola během jízdy. Pro tento zadaný úkol byly použity na uchycení senzorů některé díly od firmy Corrsys-Datron a zbývající prvky bylo potřeba vyrobit. Kompletním systémem následně proběhlo měření a výstupní data byla …

    brno-tech Repository record for Měření odklonu kola během jízdy (opens in a new tab)

Page 1 of 2