Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 194 for “"sweep efficiency"”.
-
Improved sweep efficiency through seismic wave stimulation
… The production mechanism is improved sweep efficiency through viscous cross-flow between different permeability layers of a reservoir as a result of fluid pressure oscillations. In this thesis, we studied a possible viscous cross-flow generation between a fracture and a rock matrix of …
-
Sweep Efficiency Improvement Using Oil Based Nanofluids in Oil-Wet Media
… potential of utilizing oil based nanofluids for sweep efficiency and oil recovery under oil-wet conditions. Oil soluble silica nanoparticles with amphiphilic interface affinity were firstly synthesized and characterized. The primary evaluation was conducted by waterflooding of oil-based …
-
Applicability of pH-triggered polymers to increase sweep efficiency in fractured reservoirs
… water breakthroughs, reduced tertiary recovery efficiency due to channeling of injected gas or fluids, dynamic calculations of recoverable hydrocarbons that are much less than static mass balance and dramatic production changes due to changes in reservoir pressure as fractures close down as …
-
Systematic study of foam for improving sweep efficiency in chemical enhanced oil recovery
… low interfacial tension and foam-improved sweep efficiency are attractive enhanced oil recovery (EOR) methods with numerous studies and researches have been conducted in the past few decades. For example, CO₂-Enhanced Oil Recovery (CO₂-EOR) is very efficient in terms of oil displacement. …
-
A comparative experimental study for improvement of sweep efficiency in naturally fractured reservoirs
… of injection profile modification and better sweep efficiency cannot be overstated. Many times, we encounter fields with natural fractures and karsted sequences that can render effective flooding almost impossible by providing less resistance and easier communication between injectors and …
-
Experimental measurement of sweep efficiency during multi-phase displacement in the presence of nanoparticles
The efficiency of one fluid displacing another in permeable media depends greatly on the pore-scale dynamics at the main wetting front. Experiments have shown that the frontal dynamics can result in two different flow regimes: a stable and an unstable front. In stable displacements, any …
-
Application of fracturing technology in improving volumetric sweep efficiency in enhanced oil recovery schemes
The industry has developed methods to improve sweep efficiency during Enhanced Oil Recovery processes. These methods include the use of certain injection/production patterns, drilling horizontal and deviated wells, use of special chemicals as well as inflow control devices (ICDs). The purpose of …
-
Geothermal Sweep Efficiency Enhancement Potential Analysis Using Geological Modeling And Numerical Simulation On Unconventional Deadwood Formation
… investigates the potential to enhance geothermal sweep efficiency in the fractured, low-permeability Deadwood Formation using a cellulose-based biopolymer and gel treatment. A geological model was developed using well log and structural data from four wells in the Williston Basin and subsequently …
-
Sweep efficiency for solvent injection into heavy oil reservoirs at grain-scale displacement of extremely viscous fluid
… of geometry and hydraulic conductivities on the sweep efficiency. The model will form the basis for examining additional physical processes, notably mass transfer between fluids, and the possibility that fingering of the low viscosity fluid occurs within individual pore throats.
-
Comparison of five-spot areal-sweep-efficiency calculation procedure to model performance for mobility ratios other than one
Includes bibliographical references (pages 50-51).
-
Simulation study of areal sweep efficiency versus a function of mobility ratio and aspect ratio for staggered line-drive waterflood pattern
… involves rough calculations based upon areal sweep efficiencies of displacements in homogeneous, two-dimensional, scaled, physical models. These results are available as a function of the displacement pattern and the mobility ratio M. In this research I studied the effect of mobility ratios on …
-
Modeling the Effectiveness of Polymer flooding for Enhancing Oil Recovery compared to Water flooding and the Effect of Reservoir Characteristics on their Sweep Efficiency
… (EOR) technologies are employed to improve sweep efficiency in oil reservoirs and increase oil recovery. Polymer flooding is an EOR technique that aims to increase the viscosity of water being injected to lower its mobility and displace more oil towards the production wells. The purpose of …
-
Comprehensive evaluation of a novel EOR method-coupling low salinity water flooding and preformed particle gel to enhance oil recovery in fractured reservoirs
… used to plug the thief zones and thereby improve sweep efficiency in reservoirs. However, particle gel treatment can only be used to plug fractures or high permeable channels to improve sweep efficiency and has little effect on displacement efficiency.</p><p>Oil recovery is the product of …
-
A Comparison of Waterflood Management Using Arrival Time Optimization and NPV Optimization
… at the producers and thus reduce the sweep efficiency in the field. One approach to counteract the impact of heterogeneity and to improve waterflood sweep efficiency is through optimal rate allocation to the injectors and producers. Through optimal rate control, we can manage the …
-
System Design and Optimization of CO2 Storage in Deep Saline Aquifers
Optimization of waterflooding sweep efficiency has been widely applied in reservoir engineering to improve hydrocarbon recovery while delaying water breakthrough and minimizing the bypassed oil in reservoirs. We develop a new framework to optimize flooding sweep efficiency in geologic formations …
-
Foaming behavior of rich hydrocarbon gas in viscous oil, sandstone formations
… as gravity override, viscous fingering, and poor sweep efficiency due to the high mobility ratio of gas to oil. Foam-assisted water-alternating-gas (FAWAG) injection has emerged as a viable technique to enhance volumetric sweep efficiency by reducing gas mobility. However, practical implementation …
-
Modeling and simulation of polymer flooding including the effects of fracturing
… are used to reduce water mobility and improve sweep efficiency. For very viscous oil, polymer flooding is a potential non-thermal approach for minimizing viscous fingering and improving both displacement sweep efficiency and volumetric sweep efficiency. Polymer manufacturing techniques has been …
-
Optimal Waterflood Management under Geologic Uncertainty Using Rate Control: Theory and Field Applications
… segments along the wellbore, thereby maximizing sweep efficiency and delaying water breakthrough. It is well recognized that field scale rate optimization problems are difficult because they often involve highly complex reservoir models, production and facilities related constraints and a large …
-
Experimental Study of Heavy Oil Recovery Mechanisms in a 2D System
… in a 2D Model. To evaluate the effect of sweep efficiency improvements with and without local pore level trapping of fluids, a 2D Hele-Shaw cell and a 2D Glass-bead model were used to visualize the dominant mechanisms of water, surfactant, polymer, and SP to enhance heavy oil recovery. …
Page 1 of 10