Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"tack coat"”.

  1. Performance of Tack Coat Materials in Saskatchewan Climate

    Tack coat materials are used to provide sufficient bond between an existing asphalt concrete layer and a new asphalt concrete overlay or between two lifts of a new asphalt concrete layer. Tack coat materials are typically emulsified bituminous materials. Tack coat performance has not been …

    sask Repository record for Performance of Tack Coat Materials in Saskatchewan Climate (opens in a new tab)

  2. Laboratory Methods and Specifications to Test Tack Coat Materials

    Tack coat, widely used as a bonding agent, is essential for reducing pavement distresses such as slippage and fatigue cracking. The impact of tack coat application on pavement interlayer shear strength (ISS) is a critical focus in asphalt and composite paving. Its effectiveness in enhancing shear …

    unr Repository record for Laboratory Methods and Specifications to Test Tack Coat Materials (opens in a new tab)

  3. Developing Tack Coat Specification for Long-Lasting Composite Pavement Performance

    … underlying layers. It is necessary to apply a tack coat material to ensure complete bonding during the construction of new pavements or rehabilitation processes. Otherwise, the pavement integrity may become compromised. The amount of tack coat and construction quality impact the pavement …

    unr Repository record for Developing Tack Coat Specification for Long-Lasting Composite Pavement Performance (opens in a new tab)

  4. Optimization of in-situ tack coat application rate and installation

    … of phase 2, focuses on optimizing in-situ tack coat application rate and field installation. The main objectives of phase 2 were to validate the lab-determined optimum residual application rate for tack coat materials on a milled hot-mix asphalt (HMA) surface and to evaluate field …

    uiuc Repository record for Optimization of in-situ tack coat application rate and installation (opens in a new tab)

  5. Quantitative Measurement of Tackiness and Bonding Potential of Trackless Tack Coat

    Application of tack coats prior to placement of a thin overlay is a prerequisite to bond between the existing and the overlaid layers. Although a conventional tack is appropriately applied to the surface, this material is likely to be picked up and contaminated by construction traffic. Trackless …

    tamu Repository record for Quantitative Measurement of Tackiness and Bonding Potential of Trackless Tack Coat (opens in a new tab)

  6. A Computer Vision-based Method for Tack Coat Coverage Inspection Using Drone-Collected Images

    Tack coat is a thin asphalt applied between the existing surface and asphalt overlay during road rehabilitation. The uniformity of tack coat coverage plays a vital role in providing adhesive bonding between the two layers in the pavement structures. To ensure tack coat uniformity, the current …

    wvu Repository record for A Computer Vision-based Method for Tack Coat Coverage Inspection Using Drone-Collected Images (opens in a new tab)

  7. Development of a testing approach for tack coat application rate at pavement layer interfaces

    … is affected by different factors including tack coat material, application rate and temperature, as well as pavement mix type, volumetric characteristics, surface texture and cleanliness. Tack coat is a light layer of diluted asphalt that is applied to hot mix asphalt concrete (HMA) or …

    uiuc Repository record for Development of a testing approach for tack coat application rate at pavement layer interfaces (opens in a new tab)

  8. Evaluation of the Effect of Tack Coat Type, Application Rate, and Surface Type on Interlayer Shear Strength

    Tack coat is an asphaltic material applied between asphalt pavement layers. Since pavement is a multilayered structure, it is highly important to make proper bond between the layers to achieve a monolithic behavior. Hence, inadequate bond due to application of inadequate amount of tack coat may …

    sdstate Repository record for Evaluation of the Effect of Tack Coat Type, Application Rate, and Surface Type on Interlayer Shear Strength (opens in a new tab)

  9. Determination of Optimum Tack Coat Application Rate for Geocomposite Membrane Use in Roads and Overlaid Bridge Decks

    … and stress absorption layer. However, the tack coat application rate is critical as an excessive amount can cause eventual slippage, while too little may result in debonding. A new geocomposite membrane, which is comprised of a low modulus PVC layer sandwiched between two layers of nonwoven …

    vt Repository record for Determination of Optimum Tack Coat Application Rate for Geocomposite Membrane Use in Roads and Overlaid Bridge Decks (opens in a new tab)

  10. Fracture characterization of thin bonded asphalt concrete overlay systems

    … tests with emulsion and asphalt cement as tack coat material. Suggested wet application of tack coat emulsion on textured base, compacted with heated Superpave gyratory compactor top plate closely resembles field installation of TBOs. Moreover tack coat emulsion permeation effects on …

    uiuc Repository record for Fracture characterization of thin bonded asphalt concrete overlay systems (opens in a new tab)

  11. Investigation of Bonding between Open Graded Friction Courses and Underlying Asphalt Pavement Layers

    … layers including underlying surface condition, tack coat material, and application rate, OGFC mixture gradation (or texture), OGFC binder viscosity and content, compaction effort, and ambient conditions. This research investigated the variables affecting the bond between the OGFC and the …

    clemson Repository record for Investigation of Bonding between Open Graded Friction Courses and Underlying Asphalt Pavement Layers (opens in a new tab)

  12. Evaluation of the bond strength of asphalt overlays

    … between pavement layers. The research evaluated tack coat materials and mix designs for the West Virginia Department of Highways. The project included a laboratory and a field phase. For the laboratory work, 9.5 mm and 19 mm NMAS mix designs were evaluated. NTSS-1HM and SS-1h tack coats were …

    wvu Repository record for Evaluation of the bond strength of asphalt overlays (opens in a new tab)

  13. Investigation of Warm Mix Asphalt Overlays and Geosynthetic Pavement Interlayers

    … the WMA has sufficient heat to warm the binder tack coat and saturate the geotextile to create an impervious barrier while bonding the overlay to the existing pavement. The scope and purpose of this study to investigate the possibility of utilizing warm mix asphalt in geosynthetic interlayers. …

    clemson Repository record for Investigation of Warm Mix Asphalt Overlays and Geosynthetic Pavement Interlayers (opens in a new tab)

  14. Thin maintenance surfaces for municipalities

    … mitigating existing distresses. TMS such as seal coat, slurry seal, micro-surfacing, and fog seal are cost effective preventive maintenance techniques that when properly used reduce pavement life cycle costs. Currently, many municipal street officials cannot expend the effort to test or improve …

    iastate Repository record for Thin maintenance surfaces for municipalities (opens in a new tab)

  15. Application of Cellulose Nanocrystals (CNCs) in Emulsified Asphalt

    … are cold recycling of asphalt pavement, tack-coat to bind successive layers, soil treatments, and cold surface treatments, such as micro-surfacing, cheap sealing, and fog sealing. However, due to the complicated chemistry and high-temperature sensitivity of the rheological behavior of …

    waterloo Repository record for Application of Cellulose Nanocrystals (CNCs) in Emulsified Asphalt (opens in a new tab)

  16. Emulzní mikrokoberce s použitím R-materiálu

    Silniční síť v ČR je téměř 55 738 km a její údržba je dlouhodobě podfinancována. Je tedy zapotřebí hledat způsoby, jak prodloužit celkovou životnost komunikací. Emulzní mikrokoberce patří mezi emulzní kalové vrstvy a jsou tvořeny tenkou vrstvou ze směsi kameniva, asfaltové emulze, vody a regulátory …

    brno-tech Repository record for Emulzní mikrokoberce s použitím R-materiálu (opens in a new tab)

  17. Asfaltová souvrství s využitím sklovláknitých kompozitních materiálů

    Diplomová práce se zabývá používáním výztužných kompozitních materiálů do souvrství asfaltových vozovek. Tyto geosyntetické materiály jsou v konstrukcích pozemních komunikací používány především za účelem omezení šíření trhlin a prodloužení životnosti konstrukce. V rámci této práce byla vyrobena …

    brno-tech Repository record for Asfaltová souvrství s využitím sklovláknitých kompozitních materiálů (opens in a new tab)

  18. Použití sklovláknitých geomříží do asfaltových vozovek

    Bakalářská práce se zabývá používáním sklovláknitých geomříží do souvrství asfaltových vozovek. Tyto prvky se používají jako výztužné materiály v konstrukci vozovek především pro částečnou eliminaci či oddálení tvorby trhlin ve vozovce a pro přenos tahových zatížení, která se roznášejí do …

    brno-tech Repository record for Použití sklovláknitých geomříží do asfaltových vozovek (opens in a new tab)

  19. Faktory ovlivňující spojení asfaltových vrstev

    Bakalářská práce se zabývá problematikou spojení asfaltových vrstev. V bakalářské práci je laboratorně zkoumáno několik faktorů, které mohou spojení ovlivňovat. Dále se práce věnuje používaným zkušebním metodám pro laboratorní posouzení spojení asfaltových vrstev. Pro účely laboratorního posouzení …

    brno-tech Repository record for Faktory ovlivňující spojení asfaltových vrstev (opens in a new tab)

  20. Asfaltové vrstvy s výztužnými sklovláknitými geomřížemi

    Diplomová práce se věnuje používání sklovláknitých geomříží a geokompozitů v konstrukci vozovek. Výztužné prvky jsou vkládány mezi obrusnou a ložní asfaltovou vrstvu. Diplomová práce sumarizuje poznatky spojené s vyztužováním netuhých vozovek za použití skelného vlákna. Zkoumá vliv výztužných …

    brno-tech Repository record for Asfaltové vrstvy s výztužnými sklovláknitými geomřížemi (opens in a new tab)

Page 1 of 2