Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 197 for “"technological process"”.

  1. Technological process for the fabrication of a MEMS microswitch actuated by a PZT thin film

    … a silicon nitride film bring to a fabrication process simpler and faster than a process that employs SOI wafers. A big problem to face is the growth of PZT films with good piezoelectric properties with bottom electrodes deposited over silicon nitride. In particular the aim is to design and …

    poli-torino Repository record for Technological process for the fabrication of a MEMS microswitch actuated by a PZT thin film (opens in a new tab)

  2. Relational and technological process concept utilizing a human-in-the-loop-centered methodology for USSOCOM

    … to introduce and validate the Relational and Technological Capstone (RTC), which expands upon existing human factors requirements through both architectural and behavioral diagrams in a well-defined set of methodology-driven process steps. In referencing the system lifecycles as defined by the …

    colostate Repository record for Relational and technological process concept utilizing a human-in-the-loop-centered methodology for USSOCOM (opens in a new tab)

  3. GERMINATION AS A BIO-TECHNOLOGICAL PROCESS TO ENHANCE THE USE OF QUINOA (CHENOPODIUM QUINOA WILLD.) IN CEREAL-BASED PRODUCTS

    … recently fermentation have been proposed as a process able to mask the bitterness with aromatic compounds and/or sugar formation. Sprouting has been proposed as a suitable process to enhance the nutritional traits of grains, including quinoa. Whereas, there is a lack of information about …

    milano Repository record for GERMINATION AS A BIO-TECHNOLOGICAL PROCESS TO ENHANCE THE USE OF QUINOA (CHENOPODIUM QUINOA WILLD.) IN CEREAL-BASED PRODUCTS (opens in a new tab)

  4. Vienos tonos keliamosios galios tiltinis kranas /

    … well are done technical computing; third part – technological part, in which investigated bridge crane of 1 t. capacity rear trolley wheel, are done projection of technological process which also includes selection for different types of production. In third part also are selected technological …

    vilnius Repository record for Vienos tonos keliamosios galios tiltinis kranas / (opens in a new tab)

  5. Sėklų paruošimo technologinio proceso modernizavimas /

    … huge sums in upgrading their manufacturing processes modernization, purchase of new equipment, their compliance with the standards, technological processes automatization. All new equipment which fits all the standards usually in most cases is not enough simple operation. They need …

    vilnius Repository record for Sėklų paruošimo technologinio proceso modernizavimas / (opens in a new tab)

  6. Multi-element Stable Isotope Analysis of Alkylpyrazines and Pyridine from Roast Coffee

    … on, not only the fruit itself, but also on a technological process as in the case of roasting coffee beans. In such a case, it is not enough simply to analyse samples from different origins for the database, but an examination of the influence of the technological process of roasting on the …

    wurz-thes Repository record for Multi-element Stable Isotope Analysis of Alkylpyrazines and Pyridine from Roast Coffee (opens in a new tab)

  7. An evaluation of promotion opportunity in the United States Navy and its effect on officer retention

    … the survival and well-being of any organization. Technological advances increase the importance of the human element in the sound management of organizations. Freed from many routine functions, including less important decisionmaking tasks, executives are able to devote a greater percentage of …

    nps Repository record for An evaluation of promotion opportunity in the United States Navy and its effect on officer retention (opens in a new tab)

  8. Alkaline Activation of Ambient Cured Geopolymer Mortar and Concrete Based on Class C Fly Ash

    … is the development of alternative cements. A new technological process called geopolymerization provides an innovative solution, and the presence of aluminum and silicon oxides in fly ash has encouraged its use as a source material. To promote the employment of geopolymers for practical concrete …

    texas-state Repository record for Alkaline Activation of Ambient Cured Geopolymer Mortar and Concrete Based on Class C Fly Ash (opens in a new tab)

  9. Precolumbian Flaked Stone Assemblages in the West Indies

    … West Indian flaked stone tool analysis based on technological process. Precolumbian flaked stone assemblages in the Caribbean have been classified in the past using continental models of hunting and gathering societies and stylistic variation in the artifacts has been used to explain cultural …

    utk-theses Repository record for Precolumbian Flaked Stone Assemblages in the West Indies (opens in a new tab)

  10. Lakštų lyginimo staklės /

    … on there of product of design, need change technological process. The specifications of metal sheet trimming machine-tools examined are: speed of sheets trimming 0,34 m/s, measurement of sheet: ply a = 2 ^ 6 mm, width b < 1500 mm. The theoretical part of this work covers three consecutive …

    vilnius Repository record for Lakštų lyginimo staklės / (opens in a new tab)

  11. Moteriškos rankinės technologinės inovacijos /

    … modelling. The characteristic of threads and a technological sequance of the product was given in this paper, together with the partition of work flow. At the end of bachelor‘s paper the summary is written. Used literature is refered. Two analogs of the handbags with descriptions are given. Also …

    vilnius Repository record for Moteriškos rankinės technologinės inovacijos / (opens in a new tab)

  12. Aukštrakių nuotekų valymo įrenginių elektros vartojimo efektyvumo tyrimas /

    … disposal devices. During this research the whole technological process of sewage disposal has been examined and the analysis of electricity consumption has been done. The technical characteristics of the units have been measured and their technological standards have been estimated as well. The …

    vilnius Repository record for Aukštrakių nuotekų valymo įrenginių elektros vartojimo efektyvumo tyrimas / (opens in a new tab)

  13. Grūdų sandėliavimo komplekso automatizavimas /

    … electrical equipment and automating control process. Due to the grain storage facility overhaul, to ensure power delivery reliability, hook up from the current transformer station MZ-611, 10/04 KV, transformer T-2 is anticipated. Expected interior electrical panel renovation by replacing …

    vilnius Repository record for Grūdų sandėliavimo komplekso automatizavimas / (opens in a new tab)

  14. Kvantinių kaskadinių lazerių elektrinių ir optinių parametrų charakterizavimas /

    … industrial groups. Development and optimisation process includes iterations of modelling parameters adjustments based on results acquired from technological process and consequent measurements of properties of fabricated devices. This process requires very fast feedback and high accuracy and …

    vilnius Repository record for Kvantinių kaskadinių lazerių elektrinių ir optinių parametrų charakterizavimas / (opens in a new tab)

  15. Modelado y verificación experimental del comportamiento a traccion de probetas bimaterial termoplasticas. (PP-PE y ABS-HIPS)

    [EN] The injection process is a very important part of the manufacture of thermoplastics. They are used for the fabrication of a wide variety of products because they comply perfectly with the overall objectives of low cost, precise size and almost the complete elimination of defects in the …

    upv Repository record for Modelado y verificación experimental del comportamiento a traccion de probetas bimaterial termoplasticas. (PP-PE y ABS-HIPS) (opens in a new tab)

  16. Šaltkalvio puskombinezonio išplėtimas /

    … calculated.The characteristic of the threads and technological line are made. Suitable machinery is chosen. The place of work and course are planned, similarly as the partition of the work. The process schemes, technological process schemes of designed product are drawn and the plan of the sewing …

    vilnius Repository record for Šaltkalvio puskombinezonio išplėtimas / (opens in a new tab)

  17. Cooking with stones: An ethnoarchaeological study of stone oven cooking strategies in island Melanesia

    … strategy. The appearance of distinctive local technological variants that is detected at Arapus site on Efate, then, may indicate the process of local adaptation and diversification. The examination of contemporary cooking practices demonstrates that stone oven cooking is a complex …

    hawaii Repository record for Cooking with stones: An ethnoarchaeological study of stone oven cooking strategies in island Melanesia (opens in a new tab)

  18. Dvipusių moteriškų švarkelių su originalios konstrukcijos kišenėmis kolekcijos techniniai sprendimai /

    … design of 5 original pockets construction and technological research was analyzed, and the most acceptable pocket applied in the final product. Based on the analysis of model analogues, reviews of fashion trends and research results, mini collection of 3 women's double-sided autumn / winter …

    vilnius Repository record for Dvipusių moteriškų švarkelių su originalios konstrukcijos kišenėmis kolekcijos techniniai sprendimai / (opens in a new tab)

  19. Autotransporto tunelis Šiauliuose /

    … part; • Calculation of holding structures; • Technological and economical part. In architectural - constructional part include overview of the physical geographical and geological situation, hydrogeological conditions, description the main characteristics of the tunnel, territory planning and …

    vilnius Repository record for Autotransporto tunelis Šiauliuose / (opens in a new tab)

Page 1 of 10