Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"temperature mixing"”.
-
Rates and patterns of temperature mixing at a small stream confluence under variable incoming flow conditions
… converge and start to mix. The degree of mixing that occurs within a confluence influences ecological and water quality conditions locally as well as farther downstream. Nevertheless, variations in rates and patterns of mixing at confluences under different flow conditions are poorly …
-
THE EFFECTS OF SALT, SODIUM TRIPOLYPHOSPHATE AND FROZEN STORAGE ON FLAKED, CURED PORK.
… evaluated such parameters as flake size, flaking temperature, mixing time, salt levels and sodium tripolyphos-phate concentrations on fresh pork products. It was not until this project, however, that a flaked, cured pork product was evaluated.
-
Development and Calibration of Reaction Models for Multilayered Nanocomposites
… reactions, and cannot be used to quantify mixing rates at lower temperatures within reasonable accuracy [Fritz (2011)]. We thus develop a thermal model for a multilayer stack comprising a reactive Ni-Al bilayer (nanocalorimeter) and exploit temperature evolution measurements to calibrate …
-
Processing advancements in the recovery of oils from vegetable oil refinery by-products
… studying the factor effects of elevated temperature, pressure, shear rate, residence time, acid addition, and base addition on oil recovery has been performed. Results of the factor study indicate temperature has a major influence on both types of by-products. There is also an influence …
-
The Chemical and Mechanical Properties of Thiol Modified ABS
… to ABS in latex and during processing in a high temperature mixing operation through the thiol group by free radical addition to the double bond. The bound stabilisers produced in concentrated form (masterbatches) have been diluted to normal concentration (1%) with unstabilised ABS and their …
-
Melt hydroperoxidation polypropylene with potential application in pollution control
… melt by injecting air. This was done first by mixing additive free polypropylene powder with air in a batch mixer. The influence of air flow rate, temperature, mixing time and rotor RPM on the concentration of hydroperoxide groups were studied. Iodometric analysis and fourier transform infrared …
-
Aspects of phase separation in an experimental mixer-settler using two solvent extraction systems
… introduction level (for system 2 only), and temperature. Mixing intensity had no appreciable effect with either system. Microscopic examination of the dispersion produced with system 2 revealed the existence of double dispersions; that is, drops within drops. A photomicroscopic technique was …
-
The Formation Mechanisms of Galaxy Tails: A Statistical and Case Study
… ISM-accreted tail material, we see evidence of temperature mixing with the IGM in the former. Velocity and radial trajectory maps show a sharp impulse of ∆v ≈ 50 km s−1 over 4 snapshots, affecting both the never ISM-accreted tail material and CGM material, with the former showing evidence of …
-
Manufacture, quality and clinical translation of an autologous, point-of-care platelet-based treatment for diabetic foot ulcers
… examined processing parameters including temperature, mixing time, haematocrit content, thrombin activity, and reagent mixing to identify critical determinants of gel performance. In parallel, a multi-site NHS observational study characterised the English DFU population, with emphasis on …
-
A study of the radiative and satellite-observed properties of the dew point front
… of the dew point front. In this study, fields of temperature, dew point temperature, mixing ratio, adiabatic equivalent potential temperature, and streamlines were chosen. The position of the dew point front from each of these analyses was then compared to the satellite-inferred position of the …
-
Recovering Cobalt from Aqueous Solutions by Evaporative, Reactive, and Cooling Crystallization
… and continuous cooling crystallization. At temperatures below 40 °C, cobalt sulfate primarily crystallizes in the heptahydrate form, while at temperatures of 60 and 80 °C, it crystallizes in the hexahydrate form. The CoSO4∙7H2O is prone to dehydration during the drying process. Additionally, …
-
The Effects of Concentration Intensification on Nanoparticle Synthesis
… reagent is rapidly injected and mixed at high temperatures to burst nucleate NPs. The temporally short and fast nature of the hot-injection method introduce stringent demands on the mixing time-scales of the reaction, a critical factor in the scaling up of nanomaterials. To address this issue, …
-
Effects of processing variables and storage on the physical, chemical, and microbial characteristics of restructured beef steaks
… products for processors. The effects of flaking temperature, flake size, mixing time, and storage on this type of product were studied. Semimembranosis, Semitendinosis, and Biceps femoris muscles were obtained from U.S. Commercial and Utility cow carcasses. Muscles were trimmed of external fat …
-
Behavioural plasticity and species interactions as key drivers of tropical fish range-extensions on temperate reefs
… predators, competitors, habitats, and suboptimal temperatures. This thesis provides empirical evidence that behavioural traits and biological interactions are underpinning mechanisms controlling the success of tropical fish establishment in temperate waters, and demonstrates some degree of …
-
3-D numerical simulation of reactive extrusion and its application to polymerization of ε-caprolactone in co-rotating twin-screw extruders
… extruders is reliable. Three indices, i.e. flux-mixing coefficient, temperature mixing coefficient, and conversion ratio mixing coefficient, are defined for the first time to evaluate the axial mixing during reactive extrusion. Moreover, transverse mixing is characterized with the ratio of …
-
Studies on protein standardisation of skim milk powder-based systems using milk ultrafiltration permeate and lactose
… permeate powder, including the influences of temperature, mixing time and holding time (Chapter 2). Both powders were reconstituted at 50% total solids and the resultant dispersions were analysed for a range of parameters, including pH, viscosity, colour, sediment, conductivity and lactose …
-
Development of Bioactive Composites for Maxillofacial (Orbital Floor) Fracture Repair and Regeneration
… fabricated by particles leaching using the room temperature mixing method, leading to the development of a condenser fabrication method that chemically bonded the hydroxyapatite to the polyurethane and controlled interconnected porosity was obtained. The concentration of nano-hydroxyapatite was …
-
Effects of pumped storage project operations on the spawning success of centrarchid fishes in Leesville Lake, Virginia
… with daily flow reversals, and water level and temperature fluctuations in Leesville Lake. Water levels in Leesville fluctuate as much as 3.5 m (11 ft) per day and 4 m (13 ft) per week during spawning periods of centrarchid fishes. In addition, daily intrusions of subsurface water from Smith …
-
Modelling Biogeochemical Cycles Across Scales: From Whole-Lake Phosphorus Dynamics to Microbial Reaction Systems
… due to climate warming, which increases water temperature and affects physical and hydrological lake regimes. In this thesis, I investigate a vast scope of the natural and anthropogenic processes affecting the biogeochemical cycles in lakes at different scales. In particular, I examine the …
-
Skin Friction Sensor Design Methodology and Validation for High-Speed, High-Enthalpy Flow Applications
… via a copper water channel to minimize the temperature gradient across the electronic systems. The design offers a unique immunity to many of the interfering influences found in complex, high-speed, high-enthalpy flows that would otherwise overshadow the desired wall shear measurement. The …
Page 1 of 2