Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 227 for “"tension compression"”.
-
Elastoplastic response of unidirectional graphite/aluminum under combined tension-compression cyclic loading
A test fixture for combined tension-compression cyclic testing of unidirectional composites was designed and characterized using 606l-O aluminum specimens. The elastoplastic response of graphite/aluminum l5° off-axis and 90° specimens under tension-compression cyclic loading was subsequently …
-
A study of tension, compression, and shear test methods for advanced composites
… areas of interest. These areas were uniaxial tension, uniaxial compression and in-plane shear. Test methods were selected for tension, compression and shear and guidelines set for the entry of material property data into a comprehensive mechanical property database being undertaken by Virginia …
-
Lüders banding and its effects on structures under tension/compression and cyclic bending loads
… structures under bending and cyclic bending. Tension/compression experiments are first performed on steel rods exhibiting Lüders banding. Special attention is given to how a specimen behaves when the initial loading is interrupted with part of it Lüders deformed and the rest of the specimen …
-
Damage, Tension/Compression Asymmetry and Inferred Crack Growth in Fatigue title of Aluminum Alloys
… the apparent stiffness of the specimen in tension vs. compression. However, unlike previously described measures, it connects the tension/compression asymmetry to a general nonlinear material model. The measure is applied to a sequence of axial fatigue tests and a rapid increase in the …
-
Analysis and development of a tunable Fiber Bragg grating filter based on axial tension/compression
… strength of optical fibers especially in tension. As a result, axial strain of only about 1% can be achieved by mechanical stretching of FBGs. In order to achieve the remaining 3% strain compression of FBGs has to be applied. In this thesis, the design and analysis of a novel device for …
-
LARGE DEFORMATION BEHAVIOR OF CAST A356 ALUMINUM ALLOY UNDER UNIAXIAL TENSION, COMPRESSION AND V-BENDING
… on the deformation behavior under uniaxial tension, compression and V-bending conditions. The alloy with a modified and refined eutectic Si phase particles showed significant improvement in ductility and bendability, whereas the differences in compression were not appreciable. In addition to …
-
Material Laws of Frp Strengthened Reinforced Concrete under Uniaxial Tension and Biaxial Tension-Compression Stress Fields
… relationships of concrete, steel and FRP in tension as well as concrete in compression and the Poisson effect resulting from the biaxial loading. The results indicate that compared to the un-strengthened RC element, the presence of the externally bonded FRP material typically alters the main …
-
Room and Elevated Temperature Constitutive Response of Polycrystalline Materials Exhibiting Tension-Compression Asymmetry under Monotonic Loading
… yield function is developed that captures tension/compression asymmetry and its evolution as exhibited by HCP materials such as magnesium alloy sheet. The model, referred to herein as “CPB06ex3ev”, is based upon the CPB06 [1] yield surface which is extended in this research to consider …
-
Crack Growth Behavior Under Creep-Fatigue Conditions Using Compact and Double Edge Notch Tension-Compression Specimens
… C(T) geometry is unsuitable. A double edge notch tension-compression, DEN(T-C), specimen to perform displacement controlled creep-fatigue crack growth testing is developed and optimized with the help of finite element and boundary element analyses. Accurate expressions for estimating the fracture …
-
Experimentation and Model Development of High Temperature Shape Memory Alloy Actuation Cycling Under Tension, Compression, and Bending
… thermomechanical actuation cycling in tension and compression, thermomechanical actuation cycling under pure bending, and C-Ring bending. Since there is significant tension - compression asymmetry in SMA phase transformation, a full-field strain response is quantified for bending cases …
-
Crack-bridging behaviour of polymer fibres in Strain-Hardening Cement-based Composites (SHCC) subject to alternating tension-compression cyclic loading
… the most critical case is cyclic loading in tension-compression regimes, in which the ductile properties of the composite can be lost after only several hundred cycles due to degradation of the fibre bridging capacity. The thesis at hand presents the results of experimental investigations …
-
Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi-Static Three-Point Bending
… flexure test, found that the material exhibits tension-compression asymmetry and in-plane anisotropy. Based on the experimental results, a model, which incorporates an anisotropic and asymmetric yield function, is implemented in LS-DYNA as a user-defined material model. The model is calibrated …
-
Experimental Characterization and Constitutive Modeling of AZ31B and ZEK100 Magnesium Alloys for Monotonic and Reverse Loading Paths
… operations. In the current research, monotonic tension, compression and large strain compression-tension-compression (CTC) and tension-compression-tension (TCT) experiments have been performed to characterize the mechanical behavior of AZ31B and ZEK100 magnesium sheets at room temperature. A …
-
Failure strength and mechanism of composite laminates under multiaxial loading conditions
… in both fill and warp directions. Biaxial tension-compression (BTC) and biaxial compression-compression (BCC) flat coupon specimens with flexible end reinforcements were designed and tested to study failure behaviors and mechanisms of composite laminates under a biaxial tension-compression …
-
Shear modulus of heavy oils, rheometer measurements: confinement effect and amplitude dependence
… two or three orders of magnitude larger than tension/compression. Linear viscoelasticity theory indicates that measurements done in the linear viscoelastic regime should be consistent between techniques as elastic properties are independent of amplitude. My research is focused on understanding …
-
Investigation of the Bauschinger effect in forged Ti-6Al-4V under cyclic loading: effects of loading direction, temperature, and strain-rate
… indicate a clear Bauschinger effect in the tension-compression sequence, while it diminishes in the compression-tension sequence after the first cycle. Notably, the magnitude of the Bauschinger effect diminishes with increasing temperature, as elevated temperatures promote the recovery …
-
Influence of temper condition on the nonlinear stress-strain behavior of boron-aluminum
… was investigated. In addition to monotonic tension and compression tests, tension-tension, compression-compression, and tension-compression tests were conducted to study the effects of cyclic loading. The laminates studied were [0], [90], [±45]<sub>S</sub>, [0/±45/0]<sub>S</sub>, …
-
Parametric Models of Maize Stalk Morphology
… structural response in four loading cases: axial tension/compression, bending, transverse compression, and torsion. 2D prismatic extrusions of specimen specific cross-sections were tested under the load conditions and compared against 2D prismatic models of the parametrized cross-sections. …
-
Experimental investigation of fatigue behavior of adhesively-bonded glass fiber joints
… cyclic stress. The ratios selected represent tension-tension (T-T), tension-compression (T-C), compression-tension (C-T) and compression-compression (C-C) fatigue-loading conditions. The R-ratios selected for these fatigue-loading conditions were R = 0.5 and R = 0.1 for T-T, R = -1 and R = …
Page 1 of 12