Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 897 for “"terephthalate"”.
-
Laser Transmission Welding of Polybutylene Terephthalate and Polyethylene Terephthalate Blends
… the effect of blend ratios of polybutylene terephthalate and polyethylene terephthalate (PBT/PET) on these laser welding characteristics. The blends were manufactured by DSM (Netherlands). They were characterized using Differential Scanning Calorimetry (DSC) and Thermal Gravimetry Analysis …
-
Transesterification of poly(ethylene terephthalate)
Master of Science (M.S.)
-
Photochemical modification of polyethylene terephthalate surface
… of deep UV irradiation on the polyethylene terephthalate (PET) surface. its response to 172 nm UV from a xenon examiner lamp in the absence of oxygen was characterized with X-ray Photoelectron Spectroscopy (XPS), Time of Flight/Secondary Ion Mass Spectrometry (ToF/SIMS), transmission …
-
UV stabilisation of poly(ethylene terephthalate)
The aim of this project was to design novel polymerisable UV absorbers which successfully protect PET from UV degradation for a longer duration of time compared to non-polymerisable UV stabilising additives. The polymerisable UV stabilisers for PET were synthesised using cyanuric chloride as a …
-
Degradation studies on recycled Polyethylene terephthalate
This project aims to investigate the influence of UV on the properties under natural and artificial weathering. The real-time outdoor weathering exposures provide the most accurate results but, they are very slow and manufacturers cannot afford to wait in order to see if a new or improved product …
-
The thermal decomposition of polyethylene terephthalate
Abstract Not Provided.
-
Mechanochemical depolymerization of poly(ethylene terephthalate)
… In this work, depolymerization poly(ethylene terephthalate) (PET) via mechanochemical hydrolysis with sodium hydroxide and acid catalyst is studied. When sodium hydroxide is used, complete depolymerization is achieved in 20 min. The stages of the depolymerization are investigated by monitoring …
-
Physical ageing in semi-crystalline polyethylene terephthalate
… far as research shows, no work on Polyethylene Terephthalate (PET) and the effects ageing can have on this polymer. Two sets of testing were performed, the first on a Thermo-mechanical Analyser (TMA) and the second on a Differential Scanning Calorimeter (DSC). The glasstransition temperatures …
-
A reactive melt modification of polyethylene terephthalate
… chemorheological modification of polyethylene terephthalate in the melt phase with low molecular weight multifunctional glycidyl compounds as reactive additives. Polyethylene terephthalate undergoes chain extension and/or branching reactions with the additives that result in modified …
-
Rare Earth Emissions from Polyethylene Terephthalate Fiber
… novelty. Polyester, specifically polyethylene terephthalate, is a ubiquitous material in the world today and offers many opportunities for the usefulness of visible light rare earth emissions. In this work we have attempted to incorporate rare earth complexes with polyester yarn using various …
-
Morphology and Properties of Amorphous Polyethylene Terephthalate
… mechanical properties of amorphous polyethylene terephthalate (PET) have been measured. A uniform morphology was observed when PET thin film (ca. 1000 (ANGSTROM)) was ultraquenched from above its equilibrium melting temperature. Sufficiently rapid quenching rate below T(,g) and heating above the …
-
Fundamental studies on poly(trimethylene terephthalate) spunbonded nonwovens
… of the sterilized nonwovens, poly (trimethylene terephthalate) (PTT) has sparked an interest in this application due to its radiation resistance. In this research, we investigated the fundamental properties of PTT spunbonded nonwovens. The comparisons among PTT, PET and PP spunbonded nonwovens …
-
Structure property relationships in rolled poly(ethylene terephthalate)
<p>Poly(ethylene terephthalate) (PET) film was processed by four paths. In Path I, PET was rolled from the amorphous glassy state. In Path II, the samples were crystallized at 150°C for 12 hours and then rolled. For Path III, amorphous PET was rolled and then annealed at 150°C for two hours. In …
-
Preparation and characterisation of poly(ethylene terephthalate) nanocomposites
… in order to prepare a series of poly(ethylene terephthalate) based nanocomposites. Foaming due to the degradation of the organic modifiers was observed as expected during small scale laboratory tests, and as a result an antifoaming agent was incorporated in order to manage the reaction more …
-
Degradation of Polyethylene Terephthalate (PET) and Polyamide (PA)
… rate of laboratory grade polyethylene terephthalate (PET) using a model enzyme (Huimcola insolens cutinase) to hydrolyze the plastic. This research aims to characterize the polymers used such that results can be compared and identify the analyses which capture degradation and …
-
Chemical recycling and upcycling of poly(ethylene) terephthalate
Poly(ethylene)terephthalate (PET) is the most commonly used plastic in the world, yet it is almost always (ca. 98%) discarded after use. The millions of tonnes of PET thrown away every day represent a valuable untapped chemical and material resource. In this work the chemical recycling and …
-
Techno-Economic Analysis of Polyethylene Terephthalate Bio-upcycling
… microorganisms to biodegrade Polyethylene Terephthalate (PET) plastic into Terephthalic Acid (TPA) and Ethylene Glycol (EG). These monomers are then fermented to produce volatile organic compounds of high value. The volatile organic compounds were chosen to simplify separation, which leads …
Page 1 of 45