Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"test methodologies"”.

  1. Reconfigurable logic test methodologies for ISDN

    … project addresses a different aspect of ISDN testing. Field programmable gate array (FPGA) technology was employed to facilitate the development. The design and development work produced a hardware platform that could be reconfigured to provide the test features associated with each project. …

    southwales Repository record for Reconfigurable logic test methodologies for ISDN (opens in a new tab) Download PDF for Reconfigurable logic test methodologies for ISDN (opens in a new tab)

  2. Time-driven test methodologies for embedded srams

    … on the other hand, it poses significant test challenges, particularly, the test time required for achieving acceptable test quality. This thesis focuses on reducing test time of e-SRAMs, for both a single and multiple memories. In practice, the test time for a single e-SRAM consists of …

    ubc Repository record for Time-driven test methodologies for embedded srams (opens in a new tab) Download PDF for Time-driven test methodologies for embedded srams (opens in a new tab)

  3. Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon

    … of SCSi. The primary focus was to develop test methodologies that can be used for identifying the dynamic fracture strength of SCSi. The methodologies developed were applied to simple MEMS shock test structures to measure preliminary dynamic fracture strength values. Based on the …

    maryland Repository record for Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon (opens in a new tab)

  4. Design and test methodologies with statistical analysis for reliable memory and processor implementations

    … proposed research is to develop comprehensive methodologies, including circuit design, new test methodologies, and statistical failure analysis, to implement reliable microprocessor and main memory systems. For a microprocessor, we have focused on the reliability issues in the embedded cache, …

    gatech Repository record for Design and test methodologies with statistical analysis for reliable memory and processor implementations (opens in a new tab)

  5. Built-in self-test techniques for analog and mixed signal circuits

    … thesis attempts to develop new techniques for testing analog parts of embedded cores-based mixed signal integrated circuits and systems. In particular, the oscillation based test methodologies have been investigated in the thesis. In the oscillation based test methods, the circuit under test …

    ottawa-retro Repository record for Built-in self-test techniques for analog and mixed signal circuits (opens in a new tab)

  6. Efficient Alternate Test Generation for RF Transceiver Architectures

    The production testing cost of modern wireless communication systems, especially basestation units, is estimated to be as high as 30-40 percent of their manufacturing cost and is increasing with system complexity, high levels of device integration and scaling of CMOS process technology and …

    gatech Repository record for Efficient Alternate Test Generation for RF Transceiver Architectures (opens in a new tab)

  7. Dynamic mechanical characterization of very soft polymeric materials using nanoindentation techniques

    … materials. The development of new automated test methodologies with improved measurement accuracy and precision for evaluating very soft polymeric materials are presented in this work. Results of viscoelastic properties at various frequencies for polyurethane and polydimethylsiloxane, using …

    ut-knoxville Repository record for Dynamic mechanical characterization of very soft polymeric materials using nanoindentation techniques (opens in a new tab)

  8. Degradation phenomenon of cementitious materials under sulphuric acid attack

    … The agglomeration of a global database of test results is complicated by the differing test methodologies employed in each study which makes it very difficult to compare the relative results of studies performed as part of septate experimental campaigns. To better utilise the results of …

    adelaide Repository record for Degradation phenomenon of cementitious materials under sulphuric acid attack (opens in a new tab)

  9. Detection of burst noise using the chi-squared goodness of fit test

    Statistically more test samples obtained from a single chip would give a better picture of the various noise processes present. Increasing the number of samples while testing one chip would however lead to an increase in the testing time, decreasing the overall throughput. The aim of this report is …

    texas Repository record for Detection of burst noise using the chi-squared goodness of fit test (opens in a new tab)

  10. Characterization of Ultra-High Performance Concrete Tension Behavior Using Different Test Methods

    … fibers that compose UHPC. However, the standard test methodologies for accurately describing the tensile behavior of UHPC are still in the process of being developed and standardized. Direct tension (DT) and four-point bending (4PB) test methods are two commonly used methods in research and …

    alabama Repository record for Characterization of Ultra-High Performance Concrete Tension Behavior Using Different Test Methods (opens in a new tab)

  11. The Characterization of a CMOS Radiation Hardened-by-Design Circuit Technique

    … thesis presents the analysis, implementation and testing of a circuit-level radiation hardened-by-design (RHBD) technique first presented in [1]. Radiation effects heavily influence the cost and design of electronics bound for radiation-rich environments such as in nuclear reactors or space. The …

    ut-knoxville Repository record for The Characterization of a CMOS Radiation Hardened-by-Design Circuit Technique (opens in a new tab)

  12. Modeling of an upper Midwest forest boundary layer and vehicle indoor air quality

    … a global standard for vehicle indoor air quality test methodologies. An initial evaluation of materials to validate test and analysis process has been completed. In addition to establishing the identity of a material for an internal standard, a VOC specific emission algorithm to predict cabin VOC …

    emich Repository record for Modeling of an upper Midwest forest boundary layer and vehicle indoor air quality (opens in a new tab)

  13. Pharmaceutical performance testing of commercially available calcium supplements

    … and dissolution profiles. Physical tests and disintegration did show a pH sensitivity. Disintegration confirmed the good uniformity of the products. In the USP required dissolution test, most of the products did not achieve acceptable drug release in the specified time period. While …

    wvu Repository record for Pharmaceutical performance testing of commercially available calcium supplements (opens in a new tab)

  14. Efficient Testing of High-Performance Data Converters Using Low-Cost Test Instrumentation.

    Test strategies were developed to reduce the overall production testing cost of high-performance data converters. A static linearity testing methodology, aimed at reducing the test time of A/D converters, was developed. The architectural information of A/D converters was used, and specific codes …

    gatech Repository record for Efficient Testing of High-Performance Data Converters Using Low-Cost Test Instrumentation. (opens in a new tab)

  15. Carton Clamp Methodologies and the Effects on Load Containment and Retention

    ABSTRACT Carton Clamp Test Methodologies and the Effects on Load Containment and Retention Tyler Don Blumer A carton clamp is an alternative device for moving packages and material. Instead of using iron tines like that of a conventional forklift, a carton clamp uses two large aluminum platens to …

    calpoly Repository record for Carton Clamp Methodologies and the Effects on Load Containment and Retention (opens in a new tab)

  16. Conformance testing of OSI protocols : the class O transport protocol as an example

    This thesis addresses the problem of conformance testing of communication protocol implementations. Test sequence generation techniques for finite state machines (FSM) have been developed to solve the problem of high costs of an exhaustive test. These techniques also guarantee a complete coverage …

    ubc Repository record for Conformance testing of OSI protocols : the class O transport protocol as an example (opens in a new tab) Download PDF for Conformance testing of OSI protocols : the class O transport protocol as an example (opens in a new tab)

  17. https://aero.umd.edu/graduate/graduate-student-forms

    … and support the design of optimized laboratory test methodologies to represent a broad range of free-field blast events.

    maryland Repository record for https://aero.umd.edu/graduate/graduate-student-forms (opens in a new tab)

  18. Testability analysis for mixed analog/digital circuit test generation and design for test

    … to mixed analog/digital circuit designers and test engineers. Specifically, monolithic mixed-signal ICs are often difficult to test (verify its full functionality) and can require a significant amount of time. Long test times and difficulty in developing test programs has been identified as a …

    washington Repository record for Testability analysis for mixed analog/digital circuit test generation and design for test (opens in a new tab)

Page 1 of 4