Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 601 for “"testing method"”.

  1. A GENERIC AUTOMATIC NUMERICAL STABILITY TESTING METHOD

    <p>In this thesis we develop a new automatic method to test algorithm's numerical stability. The new method is a combination of two stability testing methods introduced by Higham and Kahan, and takes advantage of the both method. We first generate an objective function which can reveal algorithm's …

    mcmaster Repository record for A GENERIC AUTOMATIC NUMERICAL STABILITY TESTING METHOD (opens in a new tab)

  2. The Development of an Adaptive Electromagnetic Testing Method

    … thesis focuses on the development of an adaptive method for conducting electromagnetic interference testing, which increases the efficiency of this kind of testing. The goal of this kind of testing is to find configurations that result in disturbances on the device under test. Often these tests …

    umkc Repository record for The Development of an Adaptive Electromagnetic Testing Method (opens in a new tab)

  3. Implementation of a planarity testing method using PQ-Trees

    … website GTea is introduced where two planarity testing algorithms have been implemented. Of these two algorithms, one is a brute-force method and the other a much faster PQ-Tree method introduced by K. S. Booth and G. S. Lueker. The two algorithms are discussed and running times compared in …

    reykjavik Repository record for Implementation of a planarity testing method using PQ-Trees (opens in a new tab)

  4. Implementation of a planarity testing method using PQ-Trees

    Vefsíðan GTea er kynnt, þar hafa verið útfærð tvö lagneta-prófana reiknirit. Af þessum reikniritum, þá nýtir annað sér jarðýtu aðferð, á meðan hitt er skilvirkara reiknirit sem nýtir sér gagnaskipanið PQ-Tré sem var kynnt af K. S. Booth og G. S. Lueker. Þessi reiknirit eru rædd og keyrslutímar …

    reykjavik Repository record for Implementation of a planarity testing method using PQ-Trees (opens in a new tab)

  5. A novel transient testing method for heat/energy wheel components

    … This Ph.D. thesis proposes a novel transient testing facility and method to predict the effectiveness of heat/energy wheels by testing a small component of the wheels. The component required for this test is a few coated sheets (for energy wheels) or non-coated sheets (for heat wheels). The …

    sask Repository record for A novel transient testing method for heat/energy wheel components (opens in a new tab)

  6. Simulation combined model-based testing method for train control systems

    … trains in railway systems. Therefore, functional testing is applied to verify consistency between the TCS and specification requirements. Traditional functional testing in TCSs is mainly based on manually designed test cases, which is becoming unsuitable for testing increasingly complex TCSs. …

    birmingham Download PDF for Simulation combined model-based testing method for train control systems (opens in a new tab)

  7. Development of Accelerated Life Testing Method for Bone Conduction Devices

    … the development of an accelerated lifetime testing (ALT) methodology for Cochlear’s bone conduction hearing devices (BCDs). An ALT is a testing method in which a product is exposed to higher-than-normal stress conditions to accelerate ageing and failure mechanisms. The purpose is to evaluate …

    chalmers Repository record for Development of Accelerated Life Testing Method for Bone Conduction Devices (opens in a new tab)

  8. Development of a micromechanical testing method for single wood fibres

    … In this thesis, a robust and high throughput method was de-veloped to conduct tensile tests on individual single wood fibres. Using this method,wood fibres of industrial origin were investigated, in particular, the effect of the hu-midity level on the tensile properties of these fibres was …

    chalmers Repository record for Development of a micromechanical testing method for single wood fibres (opens in a new tab)

  9. Accelerated Testing Method to Estimate the Lifetime of Polyethylene Pipes

    … and strain rates. In total, the experimental method takes approximately one week to be completed and allows the prediction of pipe lifetimes for service lifetime in excess of 50 years.

    vt Repository record for Accelerated Testing Method to Estimate the Lifetime of Polyethylene Pipes (opens in a new tab)

  10. A Novel High-Throughput Fatigue Testing Method for Accelerated Material Characterization

    … not experienced these gains. Traditional fatigue testing methods are not only slow and costly but also plagued by high variability, making it difficult to calibrate predictive models for real-world utilization. The limited progression toward creating large datasets constrains the application of …

    cornell Repository record for A Novel High-Throughput Fatigue Testing Method for Accelerated Material Characterization (opens in a new tab)

  11. Development of a corrosion testing method for hydrophobic coatings under hydrostatic pressure

    … well-understood. This research work presents a method by which superhydrophobic coatings on steel substrates can be evaluated for corrosion inhibition while under hydrostatic pressure. Many hydrophobic and superhydrophobic coatings that have been recently developed are easily damaged either from …

    unr Repository record for Development of a corrosion testing method for hydrophobic coatings under hydrostatic pressure (opens in a new tab)

  12. Development of a Computer-Aided Accelerated Durability Testing Method for Ground Vehicle Components

    … high acceleration factors and the limitations of testing implementation. In this study, a computer-aided testing method is developed for the validation of this modified approach. Hence, a new test-piece has been designed by a conjugative approach involving the finite element technique and fatigue …

    manitoba Repository record for Development of a Computer-Aided Accelerated Durability Testing Method for Ground Vehicle Components (opens in a new tab)

  13. Design and testing method for quality control of chill haze in bourbon production.

    … sub 0℃ temperatures. Common quality control test methods rely on subjective visual tests and ambient temperature turbidity measurements. Currently there is limited access to commercial devices capable of reaching the sub 0 ℃ temperatures that are required for the formation of chill haze. This …

    louisville Repository record for Design and testing method for quality control of chill haze in bourbon production. (opens in a new tab)

  14. Low Cost Millimetre Wave Over-the-Air Testing Method For 5G and Beyond

    … available, thus negating the use of connective testing methodologies. Further, the mmWave operational environments synonymous with 5G New Radio (NR), are known to be highly dynamic in both spatial and temporal domains, hence the need for effective low cost mmWave Over-the-Air (OTA) testing for …

    bristol Repository record for Low Cost Millimetre Wave Over-the-Air Testing Method For 5G and Beyond (opens in a new tab) Download PDF for Low Cost Millimetre Wave Over-the-Air Testing Method For 5G and Beyond (opens in a new tab)

  15. A background calibration technique and self testing method for the pipeline analog to digital converter

    … required for this random signal generation. The testing technique can be extended to in-field background verification if the converter is calibrated using skip-and-fill background calibration method.

    texas Repository record for A background calibration technique and self testing method for the pipeline analog to digital converter (opens in a new tab)

Page 1 of 31