Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"thermal capacitance"”.
-
Thermal Modelling for Electric Machines Using Thermal Capacitance Calculation Method: External Rotor Switched Reluctance Motor Case Study
This thesis characterizes the transient thermal response of a 12/16 External Rotor Switched Reluctance Machine (ERSRM) for an E-bike application. A method for calculating coil capacitance based on machine design parameters was introduced and implemented into a standard commercial Lumped Parameter …
-
Computational Sprinting: Exceeding Sustainable Power in Thermally Constrained Systems
… sprinting exploits the material property of thermal capacitance to temporarily store the excess heat generated when sprinting. After sprinting, the chip returns to sustainable power levels and dissipates the stored heat when the system is idle. This dissertation: (i) broadly analyzes thermal, …
-
Composite thermal capacitors for transient thermal management of multicore microprocessors
… driven layouts. In this thesis, a new thermal management solution is introduced that seeks to maximize the performance of microprocessors with dynamically managed power profiles. To mitigate the non-uniformities in chip temperature profiles resulting from the dynamic power maps, …
-
Readout electronics for microbolometer infrared focal plane array
… on the equivalence between the electrical and thermal capacitance is presented and extended to current-mode ROICs. Both voltage- and current-mode self-heating cancellation circuits are realized in silicon and the effectiveness is demonstrated with a single microbolometer. The voltage- and …
-
Analysis and comparison of resistive, ferroelectric and pyroelectric uncooled bolometers for electronic imaging systems
… the structure dependent parameters (particularly thermal conductance and thermal capacitance), and material properties such as dielectric constant, pyroelectric coefficient, loss tangent and thin film thickness. The interrelationship between the key variables and their influence on performance is …
-
Investigation of Concrete Wall Systems for Reducing Heating and Cooling Requirements in Single Family Residences
… to not only improve the building envelope thermal performance but other important residential characteristics such as durability and disaster and fire resistance. MPPs consist of Precast Concrete Panels (PCPs) that incorporate structural elements, interior and exterior finishes, insulation, …
-
Dynamic thermal response of the data center to cooling loss during facility power failure
… is also used to compare inclusion of various thermal capacitance values with experimental results. Room level experiments also illustrate the relative level of risk associated with various levels of provisioning for the same control volume and compute equipment. Although provisioning to back …
-
Estimation of thermal properties in a medium with conduction and radiation heat transfer
… constant temperature on the other boundary. The thermal capacitance of the heater proved to have an effect on the temperature measurements at the heated surface and had to be incorporated into the model. The estimation procedure involved the use of two methods, the modified Box Kanemasu algorithm …
-
Dynamics and control of ammonia-water absorption heat pumps
… applications for waste-heat recovery or thermally driven cooling and heating. Such systems operate under varying conditions of load and ambient temperature. This necessitates a well-designed control system to maintain optimal performance of these heat pumps. The first part of this study …
-
A framework for the control of electro-thermal aircraft power systems
… an aircraft engine, electrical system, and thermal management system is becoming increasingly more complex. This presents a unique control problem that requires coordination between the generation, distribution, and consumption of power on board an aircraft, while also maintaining …
-
Modeling and control of a helium closed cycle calibrating cryostat
<p>A calibrating cryostat serves as a thermal medium for measuring characteristics of extremely low temperature transducers. An isothermal block in the cryostat is required to promote temperature uniformity. Efficient transducer calibration demands that step temperature changes result in …
-
Trajectory Planning of Non-Gravity Aligned (NGA) segments in Arbitrary Directions for Large Scale Additive Manufacturing of Metals (LSAMM)
… different segments while maintaining consistent thermal conditions, all while ensuring build consistency and success.</p> <p>A welding cell at the University of Tennessee-Knoxville was used to demonstrate builds for this work. Further builds were completed at the Manufacturing Demonstration …
-
Hardware Simulation of Fuel Cell / Gas Turbine Hybrids
… flow conditions in order to predict the level of thermal effluent from the SOFC stack. This simulated level of heating then dynamically sets the turbine's "firing" rate to reflect the stack output heat rate. Second, a high-speed computer system with data acquisition capabilities was integrated …
-
Analytical and experimental comparison of model-based, model -free, and hybrid learning control of active and passive building thermal storage inventory
Unlike active thermal energy storage systems in central chilled water plants, most commercial buildings embody a substantial passive thermal capacitance in their structural mass and interior furnishings, which to date is not systematically utilized for cost savings, energy efficiency, load …
-
Prediction and Measurement of Thermal Exchanges within Pyranometers
… instrument, a blackened surface is in intimate thermal contact with the hot junction of a thermopile. The cold junction of the thermopile communicates thermally with the large thermal capacitance of the instrument body, which acts as a heat sink. Radiation arrives at the blackened surface …
-
Modelling and Experimental Evaluation of an Active Thermal Energy Storage System with Phase-Change Materials for Model-Based Control
… and numerical investigation of an active thermal energy storage (TES) system utilizing phase change material (PCM). The PCM-TES intended for building integration consists of PCM panels with active air circulation between the panels. Air is drawn through a channel to charge and discharge …
-
Self-heating and isothermal characterization of heterojunction bipolar transistors
… model contains information pertaining to the thermal environment in which it was characterized. This hidden temperature dependence is often ignored, and results in erroneous parameter extraction. Extending a technique developed by workers at Hewlett-Packard, a pulsed bias measurement system …
-
Passive Thermal Management of Solar Heat Flux through Building Roof Structures
… experimental techniques a novel type of passive thermal management system by determining the impact of natural convective air gaps driven by buoyancy effects and evaluating the interactive thermal properties. The properties considered included the convection heat transfer coefficient, thermal …
-
Phase Change Materials for Vehicle and Electronic Transient Thermal Systems
… transient in nature, yet traditional subsystem thermal management addresses peak load conditions with steady-state designs. The large, overdesigned systems that result are increasingly unable to meet target system size, weight and power demands. Phase change thermal energy storage is a promising …
-
Numerical Simulation and Design of Hybrid Oscillating Heat Pipe-Phase Change Materials for Radiator Panel
Effective thermal management is a challenge in spacecrafts due to demands of higher power operating sensors and devices in satellites resulting in high-temperature rise. The use of a two-phase passive heat transfer device, such as oscillating heat pipes (OHPs), can effectively increase heat …
Page 1 of 2