Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 186 for “"thermal damage"”.

  1. Detection of Incipient Thermal Damage Of Carbon Fiber/Epoxy Composites Using Fluorescent Thermal Damage Probes

    Incipient thermal damage (ITD) of carbon fiber/epoxy composites occurs due to short term exposures to temperatures known to cause matrix degradation. ITD is a concern for composite parts because it can significantly reduce mechanical strength of the part, but it cannot be detected by common …

    washington Repository record for Detection of Incipient Thermal Damage Of Carbon Fiber/Epoxy Composites Using Fluorescent Thermal Damage Probes (opens in a new tab)

  2. Thermal Damage Evaluation during Internal Cylindrical Grinding

    Grinding is a widely used finishing process to attain tight tolerances and surface integrity. However, it produces high local temperatures that can alter the properties of the material, altering the microstructure of the component. As grinding is done in an already hardened material, these changes …

    chalmers Repository record for Thermal Damage Evaluation during Internal Cylindrical Grinding (opens in a new tab)

  3. Detecting Load Induced Thermal Damage in Concrete

    … load during heating experience Load Induced Thermal Strain (LITS). LITS is known to have a significant effect on material strength and loading stiffness1 and may completely suppress thermal expansion in the loaded axes2. It has been proposed that LITS occurs as a result of a mechanical damage …

    whiterose Download PDF for Detecting Load Induced Thermal Damage in Concrete (opens in a new tab)

  4. Optimal Control of Thermal Damage to Biological Materials

    … protocol that will cause a desired amount of thermal damage within a region of tissue. The optimization algorithm is validated experimentally on an albumen tissue phantom. The transient temperature distribution within the region is simulated using a two-dimensional, finite-difference model of …

    vt Repository record for Optimal Control of Thermal Damage to Biological Materials (opens in a new tab)

  5. Nonlinear resonance ultrasonic spectroscopy for characterizing thermal damage in 17-4PH stainless steel

    … the NRUS to characterize microscopic material damage in metallic specimens with small dimensions. The geometric limitations in these small samples greatly restrict applications of other nonlinear ultrasonic techniques such as the higher harmonic generation technique. Two opposite edges of a …

    gatech Repository record for Nonlinear resonance ultrasonic spectroscopy for characterizing thermal damage in 17-4PH stainless steel (opens in a new tab)

  6. Characterization of thermal damage in 2205 duplex stainless steel with nonlinear ultrasonics (nlu)

    … of this research is to assess the material damage in thermally degraded 2205 duplex stainless steel using nonlinear ultrasonics (NLU). Seven 2205 duplex stainless steel specimens are thermally degraded at 700 C for a series of different time durations. Nonlinear Ultrasonic measurements are …

    gatech Repository record for Characterization of thermal damage in 2205 duplex stainless steel with nonlinear ultrasonics (nlu) (opens in a new tab)

  7. Nonlinear Ultrasonic Techniques for the Quantification of Thermal Damage in Carbon/Carbon Composite Material

    … The characterization focuses on identifying thermal and oxidative damage induced by heat cycles during the lifespan of the material. Carbon/Carbon friction materials are subject to high service temperatures in air and thus susceptible to rapid oxidation damage [1], leading to a reduction in …

    gatech Repository record for Nonlinear Ultrasonic Techniques for the Quantification of Thermal Damage in Carbon/Carbon Composite Material (opens in a new tab)

  8. Cycled Pulsing for Prostate Tumor to Mitigate Thermal Damage, While Conserving the Ablation Area

    … of the tumor. Most focal therapy techniques are thermally mediated, which can cause damage to the surrounding tissue, vasculatures, and nerves. Irreversible electroporation is a minimally thermal technique which delivers electric pulses to create transient nanopores in cell membrane, ultimately …

    gatech Repository record for Cycled Pulsing for Prostate Tumor to Mitigate Thermal Damage, While Conserving the Ablation Area (opens in a new tab)

  9. Fringing Electric Field Sensors for the Detection of Incipient Thermal Damage in Composite Materials

    … and safety for passengers and crew, however, thermal damage in composites is not detectable using conventional non-destructive evaluation (NDE) methods until after the material loses as much as 50% of its mechanical strength. Additionally, many NDE methods are expensive or severely limited by …

    washington Repository record for Fringing Electric Field Sensors for the Detection of Incipient Thermal Damage in Composite Materials (opens in a new tab)

  10. Thermal damage done to bone by burring and sawing with and without irrigation in knee joint replacement

    … the burr in terms of temperature generation, and thermal damage done to bone health. The effectiveness of irrigating bone to reduce bone temperature was also investigated. Bovine femora were burred and sawed with or without irrigation, and bone temperatures were recorded with a visual infrared …

    strathclyde Repository record for Thermal damage done to bone by burring and sawing with and without irrigation in knee joint replacement (opens in a new tab)

  11. Gas Explosions in Dwellings: The Effects of Interconnected Rooms and Obstacles, and the Interpretation of Thermal Damage

    … interpretation of the severity of pressure and thermal damage to the building and its contents. Guidance in reference books states that gas explosions exhibit characteristic pressure and thermal damage dependent upon the concentration of the fuel/air mixture prior to ignition. It is believed …

    whiterose Download PDF for Gas Explosions in Dwellings: The Effects of Interconnected Rooms and Obstacles, and the Interpretation of Thermal Damage (opens in a new tab)

  12. Using nonlinear ultrasound measurements to assess the stage of thermal damage in modified 9%Cr ferritic martensitic steel

    … changes in a material's properties such as thermal embrittlement and hardness changes. Therefore, the nonlinearity parameter can be used as an indicator of thermal damage due to changes in dislocation density and precipitations. The specimens are isothermally aged for different holding times …

    gatech Repository record for Using nonlinear ultrasound measurements to assess the stage of thermal damage in modified 9%Cr ferritic martensitic steel (opens in a new tab)

  13. Η χρήση των ραδιοσυχνοτήτων στη βιοψία εκτομής μη ψηλαφητών μαστογραφικών αλλοιώσεων: μελέτη των επιπλοκών της μεθόδου

    … of this new technique along with the thermal damage in the tissue.MATERIALS AND METHODS:We used the BLES device in 132 consecutive patients (134 procedures) with non-palpable mammographic lesions. The inclusion criteria consisted of suspicious microcalcifications, solid lesions and …

    greece Repository record for Η χρήση των ραδιοσυχνοτήτων στη βιοψία εκτομής μη ψηλαφητών μαστογραφικών αλλοιώσεων: μελέτη των επιπλοκών της μεθόδου (opens in a new tab)

  14. Simulating artificial lightning and composite damage

    … metals, it is important to analyse the damage caused by a strike. Literature has shown lightning can be modelled as a plasma (an ionised gas) and has been idealised into four electric current waveforms of varying current and duration. Authors have almost exclusively modelled just one of …

    qu-belfast Repository record for Simulating artificial lightning and composite damage (opens in a new tab) Download PDF for Simulating artificial lightning and composite damage (opens in a new tab)

  15. Inverse treatment planning for radiofrequency ablation

    … (RFA) offers localized and minimally invasive thermal ablation of small-to-medium sized inoperable superficial tumors. In RFA, needles are inserted into the target with image guidance and current is passed through the needles, resulting in high temperatures and consequently target ablation. …

    toronto-retro Repository record for Inverse treatment planning for radiofrequency ablation (opens in a new tab)

  16. Microstructural analysis of heated ultra-high-performance fibre-reinforced-concrete under cyclic loading.

    … concrete is essentially limited by the internal damage caused by them. This thermal damage is evidenced by the generation of cracks on the border of the pore matrix, as a consequence of the pressure inferred by the evaporation of the free water and dehydration of the compounds arisen from the …

    sevilla Repository record for Microstructural analysis of heated ultra-high-performance fibre-reinforced-concrete under cyclic loading. (opens in a new tab)

  17. Finite element analysis of the use of temperature feedback for control of laser coagulation in biological tissue

    Study of thermal damage processes in laser irradiated tissue can provide further insight into the determination of optimal coagulation procedures. Arrhenius rate thermal damage processes are sensitive to tissue damage coefficients, tissue optical properties, and laser parameters. A specific …

    rice Repository record for Finite element analysis of the use of temperature feedback for control of laser coagulation in biological tissue (opens in a new tab)

Page 1 of 10