Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 231 for “"thermal load"”.

  1. Building thermal load control: Potential, Strategy, and Implementation

    … heating and cooling to maintain suitable thermal conditions for occupants. In recent years, advanced control methods, such as model predictive control (MPC), are being studied to lower building energy cost (e.g., by deferring consumption to low rate hours of the day) while still satisfying …

    gatech Repository record for Building thermal load control: Potential, Strategy, and Implementation (opens in a new tab)

  2. Physical Modelling of Thermal Load on an Energy Pile

    … heat with the surrounding soil, but the thermal behaviour of the soil surrounding thermal piles and the effect of cyclic heating and cooling on the soil properties is not fully understood. This research was aimed at addressing the aspect of inadequate geotechnical input in energy pile …

    whiterose Download PDF for Physical Modelling of Thermal Load on an Energy Pile (opens in a new tab)

  3. The Effect of Thermal Load Configurations on Passive Chilled Beam Performance

    … of passive chilled beams. Experiments in a thermally controlled test room were conducted using thermal manikins as heat sources cooled with a 0.6 m by 2.4 m beam. The thermal manikins were arranged in a symmetric and an asymmetric configuration and tested over a range of input power to …

    tamu Repository record for The Effect of Thermal Load Configurations on Passive Chilled Beam Performance (opens in a new tab)

  4. ADVANCED THIN-FILM SORPTION THERMAL ENERGY STORAGE SYSTEMS FOR THERMAL LOAD SHEDDING/SHIFTING

    Sorption Thermal Energy Storage (STES) systems are deemed superior to conventional sensible and phase-change Thermal Energy Storage (TES) options owing to their remarkably high volume/mass-based stored energy densities and long-term storage capabilities with negligible heat loss. The STES systems …

    mtu Repository record for ADVANCED THIN-FILM SORPTION THERMAL ENERGY STORAGE SYSTEMS FOR THERMAL LOAD SHEDDING/SHIFTING (opens in a new tab)

  5. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … a framework is developed for assessing the thermal load experienced by heat pipes in a solid core heat pipe microreactor (MR) during off-normal conditions. The primary objective is to formulate a robust correlation capable of predicting the increased thermal load resulting from heat pipe …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

  6. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … a framework is developed for assessing the thermal load experienced by heat pipes in a solid core heat pipe microreactor (MR) during off-normal conditions. The primary objective is to formulate a robust correlation capable of predicting the increased thermal load resulting from heat pipe …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

  7. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … a framework is developed for assessing the thermal load experienced by heat pipes in a solid core heat pipe microreactor (MR) during off-normal conditions. The primary objective is to formulate a robust correlation capable of predicting the increased thermal load resulting from heat pipe …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

  8. A Characterization of Flat-Plate Heat Exchangers for Thermal Load Management of Thermoelectric Generators

    … specifically designed for dissipating the thermal loads from TEG modules. The majority of TEGs modules available have a flat geometry design and a square shape with typical dimension of 40 mm × 40 mm or 56 mm × 56 mm. To maximize the net electrical power generated by the TEGs the cold side …

    mcmaster Repository record for A Characterization of Flat-Plate Heat Exchangers for Thermal Load Management of Thermoelectric Generators (opens in a new tab)

  9. Finite Element Analysis of Nonlinear Panel Flutter of Rectangular Composite Plates Under a Uniform Thermal Load

    … rectangular panels. The aerodynamic pressure load is modeled through the use of the first-order piston theory. The equations of motion for the oscillating plate are determined from the principle of virtual work. Two different solution procedures are given to determine the panel motions. The …

    odu Repository record for Finite Element Analysis of Nonlinear Panel Flutter of Rectangular Composite Plates Under a Uniform Thermal Load (opens in a new tab)

  10. Assessment of the Impact of Climate Change on the Performance of Residential Buildings in New Zealand

    … in Wellington and Christchurch, the heating load will continue to exceed the cooling load. The findings revealed that heating would remain the primary thermal load for residential buildings in Wellington and Christchurch. However, in Auckland, there will be a shift from heating to cooling as …

    auckland-ms Repository record for Assessment of the Impact of Climate Change on the Performance of Residential Buildings in New Zealand (opens in a new tab)

  11. Mekanisk hållfasthet för lödfogar för kretskortskomponenter

    … data on the service life of solder joints under thermal and mechanical stress. The purpose of the project has been to analyze how different types of solder joints - THT (Through-hole technology), SMT (Surface mount technology) and BGA (Ball grid array) - are affected by vibrations and temperature …

    chalmers Repository record for Mekanisk hållfasthet för lödfogar för kretskortskomponenter (opens in a new tab)

  12. Numerical Modeling of Flame Lift-Off Phenomenon and Calculation of Thermal Loads on a Methane Fuel Injector With Complex Geometry

    … flame lift-off, injector surface temperature and thermal load resulting from the combustion phenomenon downstream of the fuel injector. Effects of fuel jet velocity, chemistry model, inlet turbulent intensity and oxygen enrichment on the flame lift-off phenomenon, and the thermal load on the fuel …

    odu Repository record for Numerical Modeling of Flame Lift-Off Phenomenon and Calculation of Thermal Loads on a Methane Fuel Injector With Complex Geometry (opens in a new tab)

  13. Modelagem e simulação dinâmica de ciclo de refrigeração operando com vazão variável de refrigerante

    … and humidity at each instant, based on transient thermal load data calculated using the RTS (Radiant Time Series) method. This tool allow to observe in real time any cycle operating parameter and evaluate its performance under different operating conditions regarding the main control variables, …

    brazil-uerj Repository record for Modelagem e simulação dinâmica de ciclo de refrigeração operando com vazão variável de refrigerante (opens in a new tab)

  14. A Spreadsheet Algorithm for Determining the Economic Feasibility of Micro-CHP Systems in the Arkansas Manufacturing Sector

    … an industrial plant has a high enough process thermal load requirement to fully utilize the energy output. This thesis will discuss simulations that were run on several actual electric and thermal load combinations, which correspond to types of manufacturing facilities commonly found in …

    arkansas Repository record for A Spreadsheet Algorithm for Determining the Economic Feasibility of Micro-CHP Systems in the Arkansas Manufacturing Sector (opens in a new tab)

  15. Control of laminar streaks and Görtler vortices in pre-transitional boundary layers

    … for vehicles, it minimizes friction drag and thermal load, while for wind tunnels, it ensures the development of facilities with low background turbulence. This thesis investigates the effects of active and passive control techniques on the receptivity and growth of laminar streaks and Görtler …

    whiterose Download PDF for Control of laminar streaks and Görtler vortices in pre-transitional boundary layers (opens in a new tab)

  16. Vibration Assisted Drilling of Carbon Fiber Reinforced Polymer and Titanium Alloy for Aerospace Application

    … These machining defects are attributed to high thermal load, continuous chip morphology, and poor chips evacuation efficiency. Vibration-assisted drilling (VAD) uses an intermittent cutting process to control the uncut chip thickness and chip morphology. VAD has potential advantages include low …

    mcmaster Repository record for Vibration Assisted Drilling of Carbon Fiber Reinforced Polymer and Titanium Alloy for Aerospace Application (opens in a new tab)

  17. Development of a Photonic Link for Enhancements in Quantum Applications

    … the use of a photonic link to alleviate the thermal load associated with traditional cryogenic qubit control methods. The development and testing of two separate photonic links is covered, as well as the design and validation of a system to address nitrogen-vacancy centers in diamond

    alabama Repository record for Development of a Photonic Link for Enhancements in Quantum Applications (opens in a new tab)

  18. 2 Micron Fiber Lasers: Power Scaling Concepts and Limitations

    … instability (MI). The second limitation is thermal failure due to inefficient pump conversion. First, a 21.5 W single-frequency, single-mode laser with adjustable output from continuous-wave to nanosecond pulses is developed. Measuring the SBS threshold versus pulse duration enables the …

    ucf Repository record for 2 Micron Fiber Lasers: Power Scaling Concepts and Limitations (opens in a new tab)

  19. Cooled Vane Heat Transfer

    … of developing and validating a model for the thermal load of the vane. As a start, a 2D model of a single slot jet was created and the predicted data compared to experimental data. This comparison showed that the choice of turbulence model highly influenced the results and variations of the …

    chalmers Repository record for Cooled Vane Heat Transfer (opens in a new tab)

  20. High temperature corrosion at urea dosage in heavy-duty trucks

    … where the higher temperature may lead to varying thermal load on the materials of the exhaust line.The increase in temperature may gradually increase the concentration of NOx as well.However,to reduce NOx emission from heavy duty trucks can be done by the most promising technology called selective …

    chalmers Repository record for High temperature corrosion at urea dosage in heavy-duty trucks (opens in a new tab)

Page 1 of 12