Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 278 for “"thermal loads"”.

  1. Effects of thermal loads on Texas steel bridges

    The effects of thermal loads on steel bridges are not well understood. Although thermal effects are discussed in the AASHTO specifications, the appropriateness of the recommended thermal gradients is questionable. Thermal effects on the bridges can impact the design of the steel superstructure, the …

    texas Repository record for Effects of thermal loads on Texas steel bridges (opens in a new tab)

  2. Changes in Stormwater Thermal Loads Due to Bioretention Cells

    … surfaces temperatures, and then transfer this thermal energy to runoff during a rainfall event, resulting in higher runoff temperatures. Bioretention cells are a common stormwater control practice identified as a possible thermal mitigation practice in urban watersheds harboring cold-water fish …

    vt Repository record for Changes in Stormwater Thermal Loads Due to Bioretention Cells (opens in a new tab)

  3. Theoretical and experimental analysis of FRP bridge decks under thermal loads

    … temperature difference is attributed to low thermal conductivity of FRP material and low thermal mass due to hollow core. Thermal response studies have been conducted for FRP bridge decks under thermal fluctuations and temperature difference across the deck depth.;In this study, thermal tests …

    wvu Repository record for Theoretical and experimental analysis of FRP bridge decks under thermal loads (opens in a new tab)

  4. Cracking and failure of hydroelectric engineering structures due to thermal loads

    … the result of a variety of phenomena, including thermal gradient, ice loading, restrained concrete shrinkage and cycles of freezing and thawing. Conventional repair methods generally consist of local sealing of cracks and defective construction joints by cementitious or chemical grouting. In many …

    manitoba Repository record for Cracking and failure of hydroelectric engineering structures due to thermal loads (opens in a new tab)

  5. Stress Changes in Railroad Car Wheels Due to Axially Symmetric Thermal Loads

    … free wheels subjected to axially symmetric thermal loadings. Residual stress levels after final cooling of the wheels is determined by a sectioning technique. Results from the tests are compared to predictions from two elastic-plastic axisymmetric finite element computer programs which …

    uiuc Repository record for Stress Changes in Railroad Car Wheels Due to Axially Symmetric Thermal Loads (opens in a new tab)

  6. Optimisation of stand-alone hybrid energy systems for power and thermal loads

    … can be used to satisfy local heating and cooling loads. As a result, there is an expectation that the overall efficiency and Greenhouse Gas Emissions of stand-alone systems can be significantly improved through waste heat recovery. The aims of this PhD project are to identify how incremental …

    edithcowan Repository record for Optimisation of stand-alone hybrid energy systems for power and thermal loads (opens in a new tab)

  7. The Structural Response of a Frame-Membrane Lunar Habitat Subjected to Impact and Thermal Loads

    … loading such as impact, blast, or heavy wind loads. Because of their success on Earth, frame-membrane structures have also been proposed as possible lunar habitat. However, for any proposed lunar habitat, including frame-membrane structures, to be successful, it must be able to withstand the …

    uconn-diss Repository record for The Structural Response of a Frame-Membrane Lunar Habitat Subjected to Impact and Thermal Loads (opens in a new tab)

  8. Nonlinear Response and Fatigue Estimation of Aerospace Curved Surface Panels to Acoustic and Thermal Loads

    This work presents a finite element modal formulation for large amplitude free vibration of arbitrary laminated composite shallow shells. The system equations of motion are formulated first in the physical structural-node degrees of freedom (DOF). Then, the system is transformed into general …

    odu Repository record for Nonlinear Response and Fatigue Estimation of Aerospace Curved Surface Panels to Acoustic and Thermal Loads (opens in a new tab)

  9. Smart Prismatic Louver Technology for Enhanced Daylighting and Management of Thermal Loads in Green Buildings

    … from mechanical systems by managing incoming thermal loads or capturing solar energy that can be used to supplement thermal systems in the building. While there are many available façade-based technologies that can perform daylighting or solar thermal energy harvesting, there remains a …

    cuny Repository record for Smart Prismatic Louver Technology for Enhanced Daylighting and Management of Thermal Loads in Green Buildings (opens in a new tab)

  10. Scaling Up Demand Response with Residential Thermal Loads: A Combined Control, Optimization, and Regulatory Perspective

    The accelerating roll-out of Renewable Energy Sources and the rampant electrification of energy end-uses are inducing more and more variability and unpredictability in the power grid. These changes make it more challenging to balance electricity production and consumption at all times, which is …

    liege Repository record for Scaling Up Demand Response with Residential Thermal Loads: A Combined Control, Optimization, and Regulatory Perspective (opens in a new tab) Restricted access

  11. On the evaluation of cyclic behaviour for a mechanical structure under variable mechanical and thermal loads

    … structures subjected to cyclic variable loads. The Linear Matching Method (LMM), which has been used in design and life assessment calculations for a number of years, is adopted for investigating the above problems. In order to produce sequences of linear solutions with spatially varying …

    strathclyde Repository record for On the evaluation of cyclic behaviour for a mechanical structure under variable mechanical and thermal loads (opens in a new tab)

  12. Heat Transfer Assessment of Aluminum Alloy Corrugated Naval Ship Deck Panels under VTOL Aircraft Thermal Loads

    … of aluminum alloy ship deck panels under the thermal loads of Vertical Take-off-and Landing (VTOL) capable aircraft has become a question of interest with the introduction of new primarily aluminum alloy ships to the U.S. Naval Fleet. This study seeks to provide an initial investigation of …

    vt Repository record for Heat Transfer Assessment of Aluminum Alloy Corrugated Naval Ship Deck Panels under VTOL Aircraft Thermal Loads (opens in a new tab)

  13. Evaluation of Various Energy Storage Options for the Internal Thermal Loads of a Non-Airbreathing Hypersonic Vehicle

    … Hypersonics not only produce large external thermal loads, but also an abundance of internal thermal loads from components such as power electronics, avionics, and batteries. Additionally, limited volume within such vehicles introduces additional constraints. Thus, having efficient heat sinks …

    vt Repository record for Evaluation of Various Energy Storage Options for the Internal Thermal Loads of a Non-Airbreathing Hypersonic Vehicle (opens in a new tab)

  14. Finite Element Nonlinear Random Response of Composite Panels of Arbitrary Shape to Acoustic and Thermal Loads Applied Simultaneously

    … to the simultaneously applied, combined acoustic/thermal loads are investigated in this dissertation. A finite element formulation for the nonlinear random response is developed. The three-node Mindlin plate element with improved transverse shear is extended and employed. The extension includes …

    odu Repository record for Finite Element Nonlinear Random Response of Composite Panels of Arbitrary Shape to Acoustic and Thermal Loads Applied Simultaneously (opens in a new tab)

  15. Numerical Modeling of Flame Lift-Off Phenomenon and Calculation of Thermal Loads on a Methane Fuel Injector With Complex Geometry

    … flame lift-off, injector surface temperature and thermal load resulting from the combustion phenomenon downstream of the fuel injector. Effects of fuel jet velocity, chemistry model, inlet turbulent intensity and oxygen enrichment on the flame lift-off phenomenon, and the thermal load on the fuel …

    odu Repository record for Numerical Modeling of Flame Lift-Off Phenomenon and Calculation of Thermal Loads on a Methane Fuel Injector With Complex Geometry (opens in a new tab)

  16. Unsteady LPT Blade Effects on Outlet Guide Vane Heat Transfer. Analysis of transient thermal loads induced by blade wakes in turbine rear structures

    Accurate thermal modeling in turbine rear structures (TRS) of aero-engines is crucial due to the high temperature air flow and cyclic thermal stresses induced by unsteady blade wakes from upstream low-pressure turbine (LPT) blades. Current industry practices predominantly rely on steady-state …

    chalmers Repository record for Unsteady LPT Blade Effects on Outlet Guide Vane Heat Transfer. Analysis of transient thermal loads induced by blade wakes in turbine rear structures (opens in a new tab)

Page 1 of 14