Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"thermal optimization"”.

  1. Electrical and Thermal Optimization of Inverter PCB Design

    … electromagnetic interference, DC resistance, and thermal performance, using a set of purpose-built test boards that were simulated and then measured in hardware to confirm the results. Rather than analyzing a full inverter PCB where every effect is tangled together, dedicated structures were …

    chalmers Repository record for Electrical and Thermal Optimization of Inverter PCB Design (opens in a new tab)

  2. Thermal optimization of a polyimide V-groove actuator for a walking micro-robot

    … MEMS actuator were performed using ANSYS 5.6. An optimization module was used to improve the performance of the existing design. A substantial improvement in the performance was observed for the proposed design. In short, this research established a methodology that can be extended for modeling …

    rit Repository record for Thermal optimization of a polyimide V-groove actuator for a walking micro-robot (opens in a new tab)

  3. Modern Methods of Design, stress & thermal optimization for additive manufacturing of space components

    Aditivní výroba kovů na bázi laserového tavení prášku je moderní metoda pro přímou výrobu materiálu v daném místě geometrie dílu. Stejně jako u jiných aditivních technologií, tisk součástí po vrstvách umožňuje uplatnění nových návrhových metod, konstrukčně složitější a multifunkční komponenty, …

    brno-tech Repository record for Modern Methods of Design, stress & thermal optimization for additive manufacturing of space components (opens in a new tab)

  4. Three-Dimensional Aero-Thermal Optimization of Film Cooling in a High Pressure Turbine

    … is generally neglected. Achieving an aero-thermal design of film cooling is a challenging task as it is based on two competing objectives; attaining a high thermal protection of the airfoil from the hot mainstream gas usually results in deteriorating the aerodynamic efficiency. The present …

    concordia Download PDF for Three-Dimensional Aero-Thermal Optimization of Film Cooling in a High Pressure Turbine (opens in a new tab)

  5. Thermal Optimization of Flat Plate PCM Capsules in Natural Convection Solar Water Heating Systems

    … research is concerned with CFD modelling of thermal energy storage tanks containing water with submerged phase change materials (PCM). Under appropriate operating conditions, the energy density of this hybrid system can be significantly increased (two to five times) relative to a system …

    mcmaster Repository record for Thermal Optimization of Flat Plate PCM Capsules in Natural Convection Solar Water Heating Systems (opens in a new tab)

  6. CHIP/PACKAGE CO-DESIGN METHODOLOGIES FOR RELIABLE 3D ICS

    … terms of signal integrity, power integrity, and thermal optimization.

    gatech Repository record for CHIP/PACKAGE CO-DESIGN METHODOLOGIES FOR RELIABLE 3D ICS (opens in a new tab)

  7. Affinity-Modulation Drug Delivery Using Thermosensitive Elastin-Like Polypeptide Block Copolymers

    … multivalent micelle forms. We hypothesized that thermal self-assembly could trigger specific binding of ligand-ELPBC to target receptors via the multivalency effect as a method to spatially restrict high-avidity interactions. We termed this approach Dynamic Affinity Modulation (DAM). The …

    duke Repository record for Affinity-Modulation Drug Delivery Using Thermosensitive Elastin-Like Polypeptide Block Copolymers (opens in a new tab)

  8. Multilevel Optimization of Lattice Structures of Structures

    … it difficult to perform modeling, analysis and optimization using existing approaches. A multilevel strategy can be employed to reduce the required memory and computational expense of the analysis and design process.In the current work, a multilevel optimization technique is developed that …

    msu Repository record for Multilevel Optimization of Lattice Structures of Structures (opens in a new tab)

  9. Preference-Informed Optimization Modelling for Community Energy Planning

    … in updating energy system designs. Current optimization models typically focus only on electricity and ignore the dependence of thermal energy on electrical supply, as well as community preferences that influence system deployment. These omissions limit their ability to reflect real …

    carleton Repository record for Preference-Informed Optimization Modelling for Community Energy Planning (opens in a new tab)

  10. Thermodynamic analysis of hydrogen production via Sorption-Enhanced Chemical-Looping Reforming

    … case methane) reforming, by chemical-looping autothermal reforming, with water-gas shift and carbonation reactions. Both H2 production rate and concentration depend on the chemical equilibrium that is established in the fuel reactor and that is influenced by several parameters (temperature, …

    chalmers Repository record for Thermodynamic analysis of hydrogen production via Sorption-Enhanced Chemical-Looping Reforming (opens in a new tab)

  11. Integrated Thermal Design and Optimization Study for Active Integrated Power Electronic Modules (IPEMs)

    Thermal management is one of many critical tasks in the design of power electronic systems. It has become increasingly important as a result of the introduction of high power density and integrated modules. It has also been realized that higher temperatures do affect reliability due to a variety of …

    vt Repository record for Integrated Thermal Design and Optimization Study for Active Integrated Power Electronic Modules (IPEMs) (opens in a new tab)

  12. Study of Outputs Power of Broadly Tunable InGaAsp/InP AMQW Lasers

    … doubled as a result of optical confinement optimization, which opens the door for improvement from electrical and thermal optimization.</p> <p>A commercially available partial differential equation solver, FlexPDE, was used to solve the main electronic and thermal equations and simulate a …

    mcmaster Repository record for Study of Outputs Power of Broadly Tunable InGaAsp/InP AMQW Lasers (opens in a new tab)

  13. Atmospheric Water Generation through Thermoelectric Cooling Optimization and Surface Customization

    … Periodic Minimal Surfaces (TPMS), data-driven optimization via machine learning, and experimental validation under various operating conditions. Thermoelectric coolers (TECs), particularly Peltier modules, were utilized to generate the necessary temperature differential for condensation. A …

    texas-state Repository record for Atmospheric Water Generation through Thermoelectric Cooling Optimization and Surface Customization (opens in a new tab)

  14. Temperature Evaluation of NoC Architectures and Dynamically Reconfigurable NoC

    … massive multicore systems suffer from thermal hotspots, exacerbating the problem of reliability in deep submicron technologies. High power consumption not only increases the chip temperature but also jeopardizes the integrity of the system. Hence, there is a need to explore holistic …

    rit Repository record for Temperature Evaluation of NoC Architectures and Dynamically Reconfigurable NoC (opens in a new tab)

  15. OPTIMIZATION OF ALTERNATING CURRENT ELECTROTHERMAL MICROPUMP BY NUMERICAL SIMULATION

    … a microfluidic system. This thesis presents the optimization process of AC electro-thermal micropump with respect to the geometry of electrode array and channel height.</p> <p>The thesis first introduces the theories of AC electrokinetic including dielectrophoresis, AC electro-osmosis (ACEO) and …

    ut-knoxville Repository record for OPTIMIZATION OF ALTERNATING CURRENT ELECTROTHERMAL MICROPUMP BY NUMERICAL SIMULATION (opens in a new tab)

  16. Development of a robust numerical optimization methodology for turbine endwalls and effect of endwall contouring on turbine passage performance

    … contour shape is usually decided through an optimization study. Moreover, a general guideline for the endwall shape variation can be extrapolated from the existing literature. It has not been validated whether the optimum endwall shape for one passage can be fitted to other similar passage …

    vt Repository record for Development of a robust numerical optimization methodology for turbine endwalls and effect of endwall contouring on turbine passage performance (opens in a new tab)

  17. Comparison of a Pin Cam and an Inverted Pin Cam design based on the parameters used for the axial vane rotary engine (beta version).

    … loading condition. The second step used this thermal data to get a final temperature profile. The third step combined the thermal data and the combustion data to perform a structural analysis of the engine components. This illustrated both the stresses and the deformations on the components. …

    wvu Repository record for Comparison of a Pin Cam and an Inverted Pin Cam design based on the parameters used for the axial vane rotary engine (beta version). (opens in a new tab)

  18. Optimization of the Thermal Performance of the Montpetit Hall Envelope: A Case Study

    … buildings and evaluating their energy use for thermal optimization, which are essential tasks. Deep retrofitting is necessary to manage climate and energy consumption. The challenge lies in selecting the most effective energy retrofitting strategy for a specific building, given the numerous …

    ottawa-retro Repository record for Optimization of the Thermal Performance of the Montpetit Hall Envelope: A Case Study (opens in a new tab)

  19. Design challenges and CAD solutions for low power and reliable monolithic 3D ICs

    … 3D ICs covered in this research include thermal modeling and optimization, 3D PDN design and analysis and addressing inter-tier performance difference and inter-tier interconnect difference. In addition, near-threshold voltage 3D IC design and analysis is also studied. A fast-accurate …

    gatech Repository record for Design challenges and CAD solutions for low power and reliable monolithic 3D ICs (opens in a new tab)

  20. Optimization Of Ocean Thermal Energy Conversion Power Plants

    A proprietary Ocean Thermal Energy Conversion (OTEC) modeling tool, the Makai OTEC Thermodynamic and Economic Model (MOTEM), is leveraged to evaluate the accuracy of finite-time thermodynamic OTEC optimization methods. MOTEM is a full OTEC system simulator capable of evaluating the effects of …

    ucf Repository record for Optimization Of Ocean Thermal Energy Conversion Power Plants (opens in a new tab)

Page 1 of 2