Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"thermo-mechanical reliability"”.
-
Thermo-mechanical reliability of 3-D interconnects containing through-silicon-vias (TSVs)
… research areas in the microelectronics industry: Thermo-mechanical reliability of 3-D interconnects containing through-silicon-vias (TSVs). This study constitutes two parts: 1. Thermal stress measurement on TSVs; 2. Analyses on thermo-mechanical reliability of TSVs. In the first part, a metrology …
-
Thermo-mechanical reliability of ultra-thin low-loss system-on-package substrates
… challenges, concerns about via and through hole reliability and warpage. Each of these factors is studied and a full-fledged test vehicle built to demonstrate the reliability of thin substrates using the advanced low-loss RXP-4/RXP-1 material system. Finite element models are developed to provide …
-
Thermo-Mechanical Reliability and Electrical Performance of Indium Interconnects and Under Bump Metallization
This thesis presents reliability analysis of indium interconnects and Under Bump Metallization (UBM) in flip chip devices. Flip chip assemblies with the use of bump interconnections are frequently used, especially in high density, three-dimensional electronic devices. Currently there are many …
-
Thermo-Mechanical Reliability of Micro-Interconnects in Three-Dimensional Integrated Circuits: Modeling and Simulation
… to analyze the effect of these parameters under thermo-mechanical cyclic loading. The stresses and damage in the interconnects of the IC were evaluated using Coffin-Manson and the energy partitioning fatigue damage models. A three-level Taguchi design of experiment method was utilized to evaluate …
-
Thermo-Mechanical Reliability of Sintered-Silver Joint versus Lead-Free Solder for Attaching Large-Area Devices
This study mainly evaluated the thermo-mechanical reliability of lead-free packaging techniques for attaching large-area chip. With 3 MPa pressure, a low-temperature (<300oC) sintering technique enabled by a nano-scale silver paste was developed for attaching 100 mm2 silicon die. This new lead-free …
-
Physics Based Reliability Assessment of Embedded Passives
… materials, manufacturing, thermal management and reliability. As the area of integral passives on printed circuit boards is relatively new, there is inadequate literature on the thermo-mechanical reliability of integral passives. Therefore, there is a compelling need to understand the …
-
Optimised solder interconnections in crystalline silicon (c-Si) photovoltaic modules for improved performance in elevated temperature climate
… Africa and the Middle East are plagued with poor thermo-mechanical reliability and short fatigue lives. There is the need to improve the performance of the system operating in such regions to solve the grave energy poverty and power shortages. Solder interconnection failure due to accelerated …
-
Study of photovoltaic (PV) module interconnections failure analysis and reliability
… R&D challenge for improving the performance and reliability of PV modules has become an urgent and critical agenda for the energy generation industry sector. The interconnection between the solar PV cells is a very important part of the PV module assembly, and its failure can adversely affect the …
-
Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections
… interconnection method without solder, which is thermo-compression bonded at a low temperature of 180C. While solder bumps are more susceptible to electromigration, Cu is capable of handling two orders of magnitude higher current density. This makes it an ideal candidate for next generation flip …
-
Modelling fatigue life of solder joints in wafer level packages
… bigger packages also tend to have poorer thermo-mechanical reliability. ABAQUS, a commercial finite element analysis software, is used to analyse such packages to estimate the fatigue life of interconnects.A modified macro-micro model adapted from existing methodology is used to analyse …
-
Analysis of column interconnects for wafer level packages
This thesis focuses on the solder joint thermo-mechanical reliability analysis of Copper column (CuC) interconnect for wafer level packages. First, a simulation-based design optimization process was established based on ABAQUS and Minitab. This process integrated finite element simulation, design …
-
A study of the thermomechanical reliability of solder joints in surface mount electronics technology
… assembly. They serve as both the electrical and mechanical connections between surface mount component and the substrate. This function is crucial in Surface Mount Technology (SMT) owing to its capability in supporting the realisation of high density, functionality and performance of electronic …
-
Chip package interaction (CPI) and its impact on the reliability of flip-chip packages
… interaction (CPI) has become a critical reliability issue for flip-chip packaging of Cu/low-k chip with organic substrate. The thermo-mechanical deformation and stress develop inside the package during assembly and subsequent reliability tests due to the mismatch of the coefficients of …
-
Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners
… warpage behavior, thermal performance, and reliability in baseplate less DSC SiC power modules. Four module configurations with varying rigidity were fab ricated using combinations of soft encapsulants, rigid encapsulants, and ceramic stiffeners. Warpage evolution throughout fabrication was …
-
Tunable Copper Microstructures in Blanket Films and Trenches Using Pulsed Electrodeposition
… in microelectronics have long been plagued with thermo-mechanical reliability issues. Control over the copper deposition process and resulting microstructure can dictate its material properties and reduce stresses as well as defects that form in the copper. In this thesis, pulse electrodeposition …
-
Reliability studies of ultra-small copper-plated through-package-vias in ultra-thin glass interposers
… and validation of models by demonstration of reliability through accelerated lifetime testing. To meet these objectives, this study focusses on four main tasks, a) mechanical modeling and design of TPVs in glass, b) fabrication of test vehicles for reliability characterization, c) reliability …
-
Modelling of solder interconnection’s performance in photovoltaic modules for reliability prediction
… of solar cells in the modules due to accelerated thermo-mechanical degradation. The goal of this research is to provide adequate information for proper design of solar cell solder joint against fatigue failure through the study of cyclic thermo-mechanical stresses and strains in the joint. This is …
Page 1 of 2