Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"thermodynamic calculation"”.

  1. Modelling of phase diagrams for renewable energy materials

    … guides for such materials research. Moreover, thermodynamic modelling of the multicomponent system using the CALculation of PHAse Diagrams (CALPHAD) approach is a very efficient way to investigate phase equilibria. In this work, the key experimental works and thermodynamic calculation are …

    unsw Repository record for Modelling of phase diagrams for renewable energy materials (opens in a new tab)

  2. Synthesis of nanostructured titanium based intermetallics by mechanical alloying

    … by addition of alloying elements of Nb and Mn. Thermodynamic calculation and theories were applied for better understanding the above phenomenon.Nanocrystalline TiN, and Al-TiN composites were also successfully manufactured by MA via mechanochemical reactions.

    nus Repository record for Synthesis of nanostructured titanium based intermetallics by mechanical alloying (opens in a new tab) Download file for Synthesis of nanostructured titanium based intermetallics by mechanical alloying (opens in a new tab)

  3. Minimum Entropy Generation in the Cardiovascular System

    … This is hypothesized to be manifested in a thermodynamic description of the cardiovascular system (CVS). Seen from a thermodynamic framework, the mechanics of blood flow can be gauged in similar terms as metabolic exchange at the capillaries - thereby providing a holistic and novel …

    ndsu Repository record for Minimum Entropy Generation in the Cardiovascular System (opens in a new tab)

  4. Catalytic Calcination of Calcium Carbonate

    … theoretical quantity of energy predicted from thermodynamic calculation depending upon the type of the kiln used (1.4 x 10^6 Btu/ton theoretical to 6 x 10^6 Btu/ton actual). The objective of this research was to attempt to reduce the energy required for the calcination by 1. decreasing the …

    unt Repository record for Catalytic Calcination of Calcium Carbonate (opens in a new tab)

  5. Chemical bath deposition and electrodeposition of epitaxial semiconductor materials for application in photovoltaic devices

    … solutions is discussed in detail, including a thermodynamic calculation of saturation and speciation of Zn(II) in aqueous solution, and a kinetic study of the deposition process. In this paper the epitaxial zinc oxide is reported grown on Au(100), (110), and (111) single crystals. Paper III …

    must-thes Repository record for Chemical bath deposition and electrodeposition of epitaxial semiconductor materials for application in photovoltaic devices (opens in a new tab)

  6. The magnetoelastic contributions to the pure shear wave elastic constants of single crystal dysprosium

    … the magnetoelastic constants numerically using a thermodynamic approach which was a modified version of freyne's theory and had a much better fit to the longitudinal elastic constants. This thermodynamic calculation which included only first-order elastic interactions and second-order …

    rice Repository record for The magnetoelastic contributions to the pure shear wave elastic constants of single crystal dysprosium (opens in a new tab)

  7. Programming for the prediction of thermodynamic phenomena

    <p>A Thermodynamic Calculation Program was developed. The program contains the calculation procedure for VAPOR/LIQUID EQUILIBRIUM(Isothermal P-X data and T-X data), HEAT-OF-MIXING(liquid mixture data) and LIQUID/LIQUID EQUILIBRIUM SEPARATION data. The program may optionally use the Knox …

    njit Repository record for Programming for the prediction of thermodynamic phenomena (opens in a new tab)

  8. A study on the equilibrium grossular + clinochlore = 3 diopside + 2 spinel + 4 H₂O

    … requirements of these assemblages. Theoretical thermodynamic prediction of the equilibrium allowing for solid solutions in pyroxene indicates that diopside should be the main component, which is consistent with the experiments in that the equilibrium curve according to the experimental brackets …

    ubc Repository record for A study on the equilibrium grossular + clinochlore = 3 diopside + 2 spinel + 4 H₂O (opens in a new tab) Download PDF for A study on the equilibrium grossular + clinochlore = 3 diopside + 2 spinel + 4 H₂O (opens in a new tab)

  9. Copper leaching in chloride media with a view to using seawater for heap leaching of secondary sulfides

    … chloride solution properties were determined by thermodynamic calculations supported by laboratory ORP (oxidation-reduction potential) measurements. The leaching kinetics was quantified by conducting a series of reactor and column leaching tests under fully-controlled conditions. The mechanisms …

    ubc Repository record for Copper leaching in chloride media with a view to using seawater for heap leaching of secondary sulfides (opens in a new tab) Download PDF for Copper leaching in chloride media with a view to using seawater for heap leaching of secondary sulfides (opens in a new tab)

  10. KINETIC AND PROCESS MODELS FOR THE UPGRADING OF BIOETHANOL AND CARBON DIOXIDE

    … Plusootnote{Aspen Technology Inc.}; several side-calculations have been performed with other software as specified. The second part reports the experimental study supporting the calculation of the separative blocks in the ethanol-acetonitrile process. Several experiments of drying, thermal …

    milano Repository record for KINETIC AND PROCESS MODELS FOR THE UPGRADING OF BIOETHANOL AND CARBON DIOXIDE (opens in a new tab)

  11. Calcium Sulfate Formation and Mitigation when Seawater was Used to Prepare HCl-Based Acids

    … photoelectron spectroscopy (XPS) technique and thermodynamic calculation using OLI Analyzer software were conducted to identify the critical scaling tendency of calcium sulfate at different temperatures. Results showed that calcium sulfate precipitation occurred when seawater was used in any …

    tamu Repository record for Calcium Sulfate Formation and Mitigation when Seawater was Used to Prepare HCl-Based Acids (opens in a new tab)

  12. Synthesis of novel solid materials from carbon dioxide and carbon monoxide

    … the evaluation of Li3N and Li2NH properties, (2) thermodynamic analysis of conversion of carbon dioxide and carbon monoxide into carbon nitride and other solid materials, (3) synthesis of carbon nitride from carbon dioxide, and (4) synthesis of graphone from carbon monoxide. First, the properties …

    mtu Repository record for Synthesis of novel solid materials from carbon dioxide and carbon monoxide (opens in a new tab)

  13. MICROSTRUCTURE REFINEMENT AND MECHANICAL PROPERTY IMPROVEMENT OF AZ31 MAGNESIUM ALLOY RESISTANCE SPOT WELDS DUE TO INOCULANTS

    … to make it a potent inoculant based on the thermodynamic calculation. Microstructural examinations of samples with different inoculant additions and under different cooling rates showed that the inoculant potency was high for the Ti inoculant, medium for the Al8Mn5, but low for the Mn, when …

    waterloo Repository record for MICROSTRUCTURE REFINEMENT AND MECHANICAL PROPERTY IMPROVEMENT OF AZ31 MAGNESIUM ALLOY RESISTANCE SPOT WELDS DUE TO INOCULANTS (opens in a new tab)

  14. Influence of humid atmosphere on crystallization behavior of slag systems used in continuous casting of steels

    … between 1.0 and 2.0, approximately. Finally, thermodynamic calculations using the FactSage 6.4 software were carried out aiming to estimate the water capacity of the mold powders. The thermodynamic calculation results showed an increase of water capacity of slag with increasing MgO content. …

    brazil-ufrgs Repository record for Influence of humid atmosphere on crystallization behavior of slag systems used in continuous casting of steels (opens in a new tab)

  15. Kondenzační parní turbina

    Diplomová práca sa zaoberá návrhom kondenzačnej turbíny v existujúcich teplárňach s protitlakovými turbínami. Podstata práce spočíva z termodynamického výpočtu regulačného stupňa a stupňovej časti turbíny. Podľa výsledkov výpočtu je spracovaná výkresová dokumentácia obsahujúca rez turbínou. Z …

    brno-tech Repository record for Kondenzační parní turbina (opens in a new tab)

  16. Parní turbina

    Diplomová práce je zaměřena na čistě kondenzační parní turbínu se dvěma neregulovanými odběry. Rozebírány jsou podrobněji témata návrhu tepelného schématu, termodynamický výpočet a konstrukční koncepce turbíny. První dva tematické okruhy jsou řešeny v rámci výpočetní části diplomové práce. V …

    brno-tech Repository record for Parní turbina (opens in a new tab)

  17. Thermodynamic Calculations of Ternary Polyalcohol and Amine Phase Diagrams for Thermal Energy Storage Materials

    … are proposed in this dissertation. Firstly, thermodynamic assessment with CALPHAD method is used to construct the Gibbs energy functions into thermodynamic database for these four materials based on available experimental results from X-Ray Diffraction (XRD) and Differential Scanning …

    unr Repository record for Thermodynamic Calculations of Ternary Polyalcohol and Amine Phase Diagrams for Thermal Energy Storage Materials (opens in a new tab)

  18. Parní turbína pro pohon drtičky v cukrovaru

    Diplomová práce se zabývá návrhem protitlakové parní turbíny pro pohon drtičky v cukrovaru o příkonu drtičky 2 200 kW. V práci je postupně proveden termodynamický návrh dvou koncepčních variant s cílem stanovit hmotnostní tok páry turbínou. V první variantě je zvoleno regulační stupeň v provedení …

    brno-tech Repository record for Parní turbína pro pohon drtičky v cukrovaru (opens in a new tab)

  19. Kondenzační parní turbína

    Tématem této diplomové práce je kondenzační parní turbína s jedním regulovaným odběrem. Na začátku je vytvořeno tepelné schéma a provedena jeho bilance. Navržené tepelné schéma je základem pro hlavní část této práce, kterou je termodynamický návrh turbíny s přetlakovým lopatkováním. Dílčí části …

    brno-tech Repository record for Kondenzační parní turbína (opens in a new tab)

  20. Parní turbína pro biomasový blok

    Cílem diplomové práce je návrh kondenzační parní turbíny na základě zadaného maximálního průtoku páry do turbíny 120 t/h, teploty admisní páry 440,0 °C, teploty odplynění 125,0 °C, tlaku páry regulovaného odběru 3,0 bar(a), hmotnostním průtoku páry RO 0 – 60 t/h a průměrné teplotě okolního vzduchu …

    brno-tech Repository record for Parní turbína pro biomasový blok (opens in a new tab)

Page 1 of 3