Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"thermoelectric effect"”.

  1. Transverse Thermoelectric Effect

    Anisotropic thermoelectric effects can be measured in certain materials. Anisotropy can also be simulated using a repeated, layered structure of two materials cut at an angle. Various aspect ratios and angles of inclination are investigated in device geometry in order to maximize the thermopower. …

    uno Repository record for Transverse Thermoelectric Effect (opens in a new tab)

  2. Development and Design of Self-Sensing SMAs using Thermoelectric Effect

    Active research of SMAs has shown that its Seebeck coefficient is sensitive to its martensitic phase transformation and has the potential to determine the SMAs state of transformation. The combination of Shape Memory Alloys, which have a positive Seebeck coefficient, and Constantan which has a …

    vt Repository record for Development and Design of Self-Sensing SMAs using Thermoelectric Effect (opens in a new tab)

  3. Exploring Thermoelectric Effect Based on Multi-layer Conductor/Organic/Conductor Devices

    <p>Thermoelectric phenomena involve the simultaneous presence of both electrical and thermal currents. The entropy has been heavily used as the driving force to diffuse charge carriers between high and low temperature surfaces towards the development of Seebeck effects in thermoelectric devices. …

    utk-theses Repository record for Exploring Thermoelectric Effect Based on Multi-layer Conductor/Organic/Conductor Devices (opens in a new tab)

  4. An analysis of the thermoelectric effect in copper using irreversible thermodynamics

    (First paragraph) The treatment of thermodynamics may be classified from two different points of view: the thermodynamic and the statistical mechanical. In the thermodynamic treatment the system as a whole is described by its macroscopic properties, whereas in the statistical treatment the system …

    creighton Repository record for An analysis of the thermoelectric effect in copper using irreversible thermodynamics (opens in a new tab)

  5. Laboratory investigation of the thermoelectric effect in clean silica sands, A

    The effect of thermoelectric coupling on self-potential was investigated by applying a temperature gradient to unconsolidated sands fully saturated by saline (NaCl) solutions. Thus far, very few published investigations have taken into account the effect of temperature on the electrodes and the …

    colo-mines Repository record for Laboratory investigation of the thermoelectric effect in clean silica sands, A (opens in a new tab)

  6. An Analysis of the Thermoelectric Effect Data for Titanium Using Onsager's Phenomenological Equations

    Thermodynamics is an experimental science that describes the macroscopic properties of materials without reference to their internal structure. The field of thermodynamics is divided into two main classifications, equilibrium and non-equilibrium thermodynamics. Equilibrium thermodynamics describes …

    creighton Repository record for An Analysis of the Thermoelectric Effect Data for Titanium Using Onsager's Phenomenological Equations (opens in a new tab)

  7. Capillary Self-Assembly and its Application to Thermoelectric Coolers

    The thermoelectric effect was discovered well over a century ago, yet performance has not shown improvement until recent years. Prior work has shown that the thermoelectric effect can be enhanced by the use of microscale pieces of thermoelectric material. Conventional assembly techniques are …

    usf Repository record for Capillary Self-Assembly and its Application to Thermoelectric Coolers (opens in a new tab)

  8. Self-Powered Infrared Detection in Low-Dimensional Carbon Assemblies

    … sensing for Internet-of-Things. Photo-thermoelectric (PTE) effect is a bandgap limitless photodetection mechanism which utilizes photons induced thermoelectric effect at material interfaces. The 1/f noise and shot noise in dark current can be significantly reduced in a zero-biased PTE …

    waterloo Repository record for Self-Powered Infrared Detection in Low-Dimensional Carbon Assemblies (opens in a new tab)

  9. Excited State Dynamics in 1D Thermoelectric Materials

    … nonadiabatic computations are used to study the thermoelectric effect and evaluate electron relaxation rates in lead telluride nanowires. κ_e = 1/τ_el is defined as the electron relaxation rate. It is directly connected to the thermoelectric figure of merit in a material. This work provides …

    ndsu Repository record for Excited State Dynamics in 1D Thermoelectric Materials (opens in a new tab)

  10. Laser-induced thermoelectric energy generation using carbon nanotube forests

    Although there has been extensive research on the thermoelectric effect, there have only been some reports on the photo-thermoelectric effect in carbon nanotubes, i.e. the conversion of light to heat to electricity. A device capable of producing a thermoelectric voltage by light irradiation on a …

    ubc Repository record for Laser-induced thermoelectric energy generation using carbon nanotube forests (opens in a new tab) Download PDF for Laser-induced thermoelectric energy generation using carbon nanotube forests (opens in a new tab)

  11. Synthesis of aliovalently-substituted GeAs2 for thermoelectric applications

    Thermoelectric effect enables direct conversion of thermal to electrical energy and provides an alternative route for power generation applications. Recently, layered tetrel pnictides are considered as a promising class of layered materials in thermoelectrics due to their robust structural …

    iastate Repository record for Synthesis of aliovalently-substituted GeAs2 for thermoelectric applications (opens in a new tab)

  12. Theoretical investigations of thermoelectric effects in advanced low dimensional materials

    … At the nanoscale, quantum confinement effects can be observed, and the conventional theory is no longer valid for the energy carriers, therefore, the theoretical assessment of the carrier transport properties is essential for nanostructured devices. Moreover, sustainable energy source …

    nus Repository record for Theoretical investigations of thermoelectric effects in advanced low dimensional materials (opens in a new tab) Download file for Theoretical investigations of thermoelectric effects in advanced low dimensional materials (opens in a new tab)

  13. THERMOELECTRIC PROPERTIES OPTIMIZATION OF PEDOT:PSS FOR ORGANIC THERMOELECTRIC GENERATOR

    The thermoelectric effect, otherwise known as “Seebeck effect”, is the direct conversion of a temperature difference between two dissimilar electrical conductors or semiconductors to an electrical voltage. By making use of this process, the thermoelectric generator (TEG) becomes a promising …

    cornell Repository record for THERMOELECTRIC PROPERTIES OPTIMIZATION OF PEDOT:PSS FOR ORGANIC THERMOELECTRIC GENERATOR (opens in a new tab)

  14. Dynamic Electrothermal Model of a Sputtered Thermopile Thermal Radiation Detector for Earth Radiation Budget Applications

    … of the operation of the device (through the thermoelectric effect), as well as for complex geometries composed of numerous different materials. Feasibility and design specifications are studied by developing a dynamic electrothermal model of the thermopile using the finite element method. A …

    vt Repository record for Dynamic Electrothermal Model of a Sputtered Thermopile Thermal Radiation Detector for Earth Radiation Budget Applications (opens in a new tab)

  15. Thermal Coulomb Drag in a Bi-Layer Semiconductor System

    In this work, we investigate the existence of a thermoelectric effect that consists of the appearance of an electric field in one layer when a temperature gradient is applied in the other layer of a double quantum well system. This represents a generalization of the Seebeck effect to the case of …

    clemson Repository record for Thermal Coulomb Drag in a Bi-Layer Semiconductor System (opens in a new tab)

  16. Photothermoelectric effect study in gold nanowires

    The thermoelectric effect is the conversion of electrical to thermal energy and vice versa, and it is of great interest in energy harvesting, cooling mechanisms based on the Peltier effect, and photodetectors based on the Seebeck effect. In the photothermoelectric effect or PTE, photons are used to …

    rice Repository record for Photothermoelectric effect study in gold nanowires (opens in a new tab)

  17. Thermoelectric generation using molten salts

    Thermoelectric generation of electrical energy from heat energy has been reviewed, the histor.f of the subject has been reassessed, and the materials used for thermoelectric generation have been examined. The suitability of a material for thermoelectric generation is determined by the product of …

    middlesex Download PDF for Thermoelectric generation using molten salts (opens in a new tab)

  18. Low-grade Thermal Energy Harvesting and Waste Heat Recovery

    … promising source of renewable energy. A cost-effective method for recovering the low-grade heat will have a transformative impact on the overall energy scenario. Efficiency of heat engines deteriorates with decrease in hot-side temperature, making low-grade heat recovery complex and …

    vt Repository record for Low-grade Thermal Energy Harvesting and Waste Heat Recovery (opens in a new tab)

  19. Thermal Properties of Dry and Saturated Soils

    … energy converter, a Peltier tile. The thermoelectric effect is the process of transforming heat energy into electrical energy. A Peltier tile was used to turn the heat stored in the soil into electrical outputs (voltage, current, and power). In this study, the two soil types used were a …

    ut-knoxville Repository record for Thermal Properties of Dry and Saturated Soils (opens in a new tab)

  20. Steady state and transient analysis of thermoelectric devices using finite element method

    Thermoelectric devices offer noiseless and environment friendly operation, which makes them the most suitable devices of the future in their category. However, the performance of these devices is still way below its competitor thermal and electrical systems. The major factor that decides the …

    rit Repository record for Steady state and transient analysis of thermoelectric devices using finite element method (opens in a new tab)

Page 1 of 3