Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"thick plates"”.

  1. Feasibility Study of Transitioning From Thick Plates (0.250”) Mounted on 30-Point Pvc Carriers To Thinner Plate Technologies Mounted on Recyclable Foam and PET (0.155”) for Post-Print Corrugated

    … These press configurations have long relied on thick 0.250” plates mounted on 0.030” PVC sheets to print onto corrugated substrates. Each year, around twenty million pounds of waste are produced by the printing industry, through paper waste, plate waste, among other materials. One large factor …

    clemson Repository record for Feasibility Study of Transitioning From Thick Plates (0.250”) Mounted on 30-Point Pvc Carriers To Thinner Plate Technologies Mounted on Recyclable Foam and PET (0.155”) for Post-Print Corrugated (opens in a new tab)

  2. Linear and nonlinear deflection analysis of thick rectangular plates using finite differences.

    … for the solution of linear and nonlinear thin plates. In the present study, the suitability of the method for the solution of nonlinear deflection of thick plates is studied for the first time. While there is major differences between small deflection and large deflection plate theories, the …

    ottawa-retro Repository record for Linear and nonlinear deflection analysis of thick rectangular plates using finite differences. (opens in a new tab)

  3. Finite element analysis of laminated composite plates.

    … behavior of isotropic and laminated composite plates. The element is based on Mindlin-Reissner's theory and the principle of virtual displacements. The element is implemented in a computer program. Results are presented and compared with analytical solutions to validate this element. Good …

    nps Repository record for Finite element analysis of laminated composite plates. (opens in a new tab)

  4. INVESTIGATION OF WELD DEFECTS USING THERMAL IMAGING SYSTEM

    … For material-based inhomogeneity in thin plates all defects located at 1.25 mm from the surface are found detectable as ΔT (temperature difference obtained on surface) > ΔTmin (detectability limit of TIBWDD system). For inhomogeneity defects in thick plates, except defects of 2.5 mm in …

    mcmaster Repository record for INVESTIGATION OF WELD DEFECTS USING THERMAL IMAGING SYSTEM (opens in a new tab)

  5. Investigation of new phase change material based thermal management systems for Li-ion batteries

    … cooling case at a high discharge rate. With cold plates, the battery temperature remains in the specified temperature range at all discharge rates, when the coolant temperature is 30°C. The results show that the thermal management system developed in the present study using 6 mm thick phase change …

    uoit Repository record for Investigation of new phase change material based thermal management systems for Li-ion batteries (opens in a new tab)

  6. Feasibility Study of a Natural Uranium Neutron Spallation Target using FLiBe as a Coolant

    … structures were analyzed using a variety of plates and large cylinders of natural uranium with a proton beam incident on a Hastelloy-N window. The supporting structures were created from Hastelloy-N due to their anti-corrosive properties of molten salts such as FLiBe and their resistance to …

    vt Repository record for Feasibility Study of a Natural Uranium Neutron Spallation Target using FLiBe as a Coolant (opens in a new tab)

  7. Analysis of thick composite plates using higher order three dimensional finite elements

    … element is developed to study the behavior of thick isotropic and laminated composite plates. The element is a 27 noded Lagrangian element based on three dimensional elasticity. Material characteristics are accounted by either using laminate plate theory or three-dimensional anisotropic theory. …

    nps Repository record for Analysis of thick composite plates using higher order three dimensional finite elements (opens in a new tab)

  8. Plastic buckling of Mindlin plates

    … with the plastic bifurcation buckling of thick plates of arbitrary shapes that are defined by polynomial functions. The plates may be subjected to in-plane normal and/or shear stresses and the edges may take on any combination of boundary conditions. The effect of transverse shear …

    nus Repository record for Plastic buckling of Mindlin plates (opens in a new tab) Download file for Plastic buckling of Mindlin plates (opens in a new tab)

  9. Skewed Bridge Behaviors: Experimental, Analytical, And Numerical Analysis

    … <p>In addition, analytical solutions for skewed thick plates under transverse load and skewed bridges subjected to truck load were developed. The thick plate solution was obtained in a framework of oblique coordinate system. The governing equation in that system was first derived and the solution …

    wayne-thes Repository record for Skewed Bridge Behaviors: Experimental, Analytical, And Numerical Analysis (opens in a new tab)

  10. VALIDATION OF A COMPUTATIONAL MODEL FOR AUTOGENOUS ARC WELDING

    … to be useful for modeling autogenous welding of thick plates. Weld seam misalignment and surface flaw detection are shown to be possible ahead of hte arch with accurate surface temperature detection methods. The potential of the model are creating a database of fusion and heat zone sizes, …

    nps Repository record for VALIDATION OF A COMPUTATIONAL MODEL FOR AUTOGENOUS ARC WELDING (opens in a new tab)

  11. Dissimilar Joining of Al (AA2139) – Mg (WE43) Alloys Using Friction Stir Welding

    … AA2139 and magnesium alloy WE43. The 9.5 mm thick plates of AA2139 and WE43 were friction stir butt welded. Different processing parameters were used to optimize processing parameters. Also, various weldings showed a crack at interface due to formation of IMCs caused by liquation during FSW. …

    unt Repository record for Dissimilar Joining of Al (AA2139) – Mg (WE43) Alloys Using Friction Stir Welding (opens in a new tab)

  12. Low-velocity impact analysis of monolithic and laminated glass using finite element method (FEM)

    … and wave propagation method for the infinite thick plates, respectively. The results from the wave propagation analytical method found a good agreement with open literature results and it was recommended for future impact predictions. The prediction results obtained include the time histories …

    birmingham Download PDF for Low-velocity impact analysis of monolithic and laminated glass using finite element method (FEM) (opens in a new tab)

  13. Feasibility of underwater friction stir welding of hardenable alloy steel

    … (1.6 m) in total length, on 0.25 inch (6.4 mm) thick plates of a hardenable alloy steel. The first series of traverses involved various revolutions per minute (RPM) and inches per minute (IPM) combinations on a dry plate. A second series was conducted while a plate was immersed in water in order …

    nps Repository record for Feasibility of underwater friction stir welding of hardenable alloy steel (opens in a new tab)

  14. Fatigue behavior of additive friction stir layer welding of Az31 magnesium alloy

    … used to fabricate a seven-layer build using 5 mm thick plates of AZ31 Mg alloy. Optical microscopy of the cross-section of the AFSLW build revealed an asymmetric grain size distribution through the layers of the build. In particular, the middle layers of the build exhibited more refined grain …

    alabama Repository record for Fatigue behavior of additive friction stir layer welding of Az31 magnesium alloy (opens in a new tab)

  15. Integrated structural analysis and design using 3-D finite elements

    … to the problem of hole shape optimization in thick plates. The plates are modeled by three dimensional eight noded elements. An element by element (EBE) preconditioned conjugate gradient (PCG) method is used for the structural analysis, because this method is well suited for poorly banded …

    vt Repository record for Integrated structural analysis and design using 3-D finite elements (opens in a new tab)

  16. VIBRATION OF THICK AND SANDWICH PLATES

    … the free vibration problem of isotropic, thick plates, of general polygonal shape and simply supported edges. Complicating effects such as the presence of initial stresses and a Winkler-Pasternak foundation are also considered. Based on an analogy approach, exact vibration relationships …

    nus Repository record for VIBRATION OF THICK AND SANDWICH PLATES (opens in a new tab) Download file for VIBRATION OF THICK AND SANDWICH PLATES (opens in a new tab)

  17. Isogeometric Finite Element Code Development for Analysis of Composite Structures

    … analysis of composite and sandwich beams and plates. This research also computes stress concentration factor in a composite plate with a hole. Isogeometric nonlinear/linear finite element code is developed for static and dynamic analysis of laminated composite plates. Nurbs linear, quadratic, …

    vt Repository record for Isogeometric Finite Element Code Development for Analysis of Composite Structures (opens in a new tab)

  18. Process-induced viscoelastic residual stress analysis of graphite/epoxy composite structures

    … time-superposition integration. Both thin and thick plates and cylinders were analyzed, subjected to the manufacturer's recommended cure cycle. In the cylinder case, the effect of the mandrel structure on residual stress fields was also investigated. Stress histories and distributions were …

    uiuc Repository record for Process-induced viscoelastic residual stress analysis of graphite/epoxy composite structures (opens in a new tab)

Page 1 of 3