Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"thickness gradient"”.

  1. Advanced Atomic Layer Deposition Techniques for Metal-Insulator-Metal Diodes

    … diode fabrication process; the introduction of a thickness gradient and doping of the insulator layer. Atmospheric pressure spatial atomic layer deposition (AP-SALD) is used for the first time for the combinatorial fabrication of MIM diodes. This unique technique is used to deposit thin dielectric …

    waterloo Repository record for Advanced Atomic Layer Deposition Techniques for Metal-Insulator-Metal Diodes (opens in a new tab)

  2. Combinatorial Experiments Using a Spatially Programmable Chemical Vapor Deposition System

    … during a run resulting in different thickness profiles on the wafer and a thickness gradient at the boundaries between segment regions. Different recipes were cycled through each of the segments in a sequence of deposition experiments to develop a model relating precursor …

    maryland Repository record for Combinatorial Experiments Using a Spatially Programmable Chemical Vapor Deposition System (opens in a new tab)

  3. Investigation of Thickness and Robustness of Ultrathin Parylene Membranes for Tissue Barrier and Co-Culture Models

    … separating cell types by more than 10 μm. A thickness gradient membrane can enable studies where the goal is to understand the physical characteristics of co-culture arrangement in the barrier model. Here, a robust method to generate ultrathin porous Parylene C (UPP) membranes is developed …

    rit Repository record for Investigation of Thickness and Robustness of Ultrathin Parylene Membranes for Tissue Barrier and Co-Culture Models (opens in a new tab)

  4. Improving Dielectric Thin Films for Metal Insulator Metal Diodes and Perovskite Solar Cells

    … deposit the insulator and the introduction of a thickness gradient. Metal-insulator-insulator-metal (MIIM) diodes based on nitrogen-doped titanium dioxide (NTiOx) and aluminum oxide (NAlOx) are fabricated by plasma-assisted atomic layer deposition. The doped MIIM diodes show higher performance …

    waterloo Repository record for Improving Dielectric Thin Films for Metal Insulator Metal Diodes and Perovskite Solar Cells (opens in a new tab)

  5. Use of atmospheric pressure spatial chemical vapor deposition to create spatially variant metal oxide semiconductor films for use in gas sensing arrays

    … costs. In this thesis, APSCVD is used to create gradients of sensing materials which are then used to create an array of sensors with unique physical properties. Materials explored using APSCVD are SnO2 thickness gradients, SnO2 and Cu2O heterojunction gradients, and zinc-tin-oxide composition …

    waterloo Repository record for Use of atmospheric pressure spatial chemical vapor deposition to create spatially variant metal oxide semiconductor films for use in gas sensing arrays (opens in a new tab)

  6. STRUCTURAL AND ELECTROMAGNETIC STUDY OF THIN AND THICK RE-Ba-Cu-O (RE = RARE EARTH) SUPERCONDUCTOR TAPES FABRICATED BY METAL ORGANIC CHEMICAL VAPOR DEPOSITION WITH AND WITHOUT BUFFER MODIFICATION

    … substrates. REBCO films are deposited as a thickness gradient (thickness ranging from 0 nm to almost 150 nm) on biaxially-textured flexible templates to understand structural properties development of films in their early stage of nucleation and growth. This work is then extended to …

    houston Repository record for STRUCTURAL AND ELECTROMAGNETIC STUDY OF THIN AND THICK RE-Ba-Cu-O (RE = RARE EARTH) SUPERCONDUCTOR TAPES FABRICATED BY METAL ORGANIC CHEMICAL VAPOR DEPOSITION WITH AND WITHOUT BUFFER MODIFICATION (opens in a new tab)

  7. Continuous Permeability Measurement During Unidirectional Vacuum Infusion Processing

    … or for simulation of a part with non-uniform thickness, one must test the permeability at various levels of compaction. This process is time consuming and often relies on interpolation or extrapolation around a few experimental permeability measurements. To accelerate the process of …

    byu Repository record for Continuous Permeability Measurement During Unidirectional Vacuum Infusion Processing (opens in a new tab) Download PDF for Continuous Permeability Measurement During Unidirectional Vacuum Infusion Processing (opens in a new tab)

  8. Southern hemisphere regional precipitation and climate variability : extremes trends and predictability

    … thermal properties of the atmosphere, meridional thickness gradient, subtropical jet, thermal wind, and baroclinicity over southern regions of Australia, thus modulating precipitation. In addition, links between anomalous wet conditions over East Africa and these characteristic Indian Ocean SSTA …

    unsw Repository record for Southern hemisphere regional precipitation and climate variability : extremes trends and predictability (opens in a new tab)

  9. Mechanical Properties of Functionally Graded Materials: Carbon Gradient inside Interstitial Free Steel

    … have to produce stronger materials to reduce the thickness of steel sheets used in cars and are now considering non-conventional steel making processes. The purpose of this PhD research was to investigate the possibility of strengthening thin sheets of interstitial free steel (IF steel) by using …

    ottawa-retro Repository record for Mechanical Properties of Functionally Graded Materials: Carbon Gradient inside Interstitial Free Steel (opens in a new tab)

  10. Thermal distortion of continuous casting moulds

    … due to bending associated with the through thickness gradient is relatively small. The distorted mould exhibits an outward bulge in the meniscus region, which has a maximum value in the 0.1-0.3 mm range, approximately 6 cms below the meniscus. The peak distortion is bounded above and below …

    ubc Repository record for Thermal distortion of continuous casting moulds (opens in a new tab) Download PDF for Thermal distortion of continuous casting moulds (opens in a new tab)

  11. Computational Fluid Dynamics and 3D Printing towards Nanoscale Thickness Gradients and Scale-up of a Spatial Atomic Layer Deposition System

    … in feature size, better control of film thickness and quality is needed. Atomic Layer Deposition (ALD) is becoming the best option for such devices as it produces high quality ultrathin films that are pinhole-free and conformal by growing the film one atomic layer at a time. However, it …

    waterloo Repository record for Computational Fluid Dynamics and 3D Printing towards Nanoscale Thickness Gradients and Scale-up of a Spatial Atomic Layer Deposition System (opens in a new tab)

  12. Laterally modified microcavity systems containing organic emitters

    … biphenyl (CBP). With the help of a thickness gradient, a relation between the large spectral distance of the cross-polarized states and the mode position within the stop band is investigated. In shadow-mask prepared, laterally restricted devices (5x5 µm2 square boxes), the …

    qucosa-diss

  13. Investigating the impacts of upgrading a full-scale conventional activated sludge process with a hybrid membrane aerated biofilm reactor

    … that differ in mixing conditions, biofilm thickness control strategies, and cassette arrangement from those employed in full-scale. This study bridged this critical knowledge gap by investigating the long-term performance (20 months) of one of the largest MABR installations in North America …

    waterloo Repository record for Investigating the impacts of upgrading a full-scale conventional activated sludge process with a hybrid membrane aerated biofilm reactor (opens in a new tab)