Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 197 for “"three axis"”.
-
TIME-OPTIMAL SPACECRAFT THREE-AXIS REORIENTATION
… time results of maneuvers over the entire eigenaxis space are presented as conic projections where the contours are the final times, while the trajectories of the principle axes of individual maneuvers are presented as latitude-longitude plots.
-
Virtual three-axis milling process simulation and optimization
… performance of milling processes up to 3-axis. Computationally efficient mathematical models are introduced to predict milling process state variables such as chip load, force, torque, and cutting edge engagement at discrete cutter locations. Process states are expressed explicitly as a …
-
A three-axis virtual computer numerical-controlled (CNC) system
… technique is experimentally verified in a 2-1/2 axis machining center.
-
Optimization of Three-Axis Vertical Milling of Sculptured Surfaces
A tool path generation method for sculptured surfaces defined by triangular meshes is presented in this thesis along with an algorithm that helps determine the best type of cutter geometry to machine a specific surface. Existing tool path planning methods for sculptured surfaces defined by …
-
Low-power front-ends for capacitive three-axis accelerometers
… front-ends that were implemented for capacitive three-axis accelerometers and their operation as a part of an interface. The switched-capacitor front-ends that were implemented are based on the charge-balancing structures, namely a self-balancing bridge and a ΔΣ front-end, which convert the …
-
Reaction forces on a milling tool during three-axis milling
This thesis discusses a graphical numerically controlled (NC) milling simulation. Graphical simulations give a better feel for what happens during a complicated process, such as NC milling, than does numerical output from a mathematical model. NC milling simulations can be used to verify tool …
-
A Nonlinear Magnetic Controller for Three-Axis Stability of Nanosatellites
The problem of magnetic control for three-axis stability of a spacecraft is examined. Two controllers, a proportional-derivative controller and a constant coefficient linear quadratic regulator, are applied to the system of equations describing the motion of the spacecraft. The stability of each is …
-
Three axis force override rate control of a PUMA 560 manipulator
… rate control of a PUMA 560 robot manipulator in three degrees of freedom. A control system is developed utilizing the necessary sensors, hardware, and software interface to enable one to operate the manipulator in rate control with unilateral force control override. A review of the theory behind …
-
Attitude determination of a three-axis stabilized spacecraft using star sensors
… each time a star observation is made. A two-axis star sensor will provide two angles to the estimator whereupon the third "unsensed" angle will be predicted; the rates about all three axes are then estimated. The results show that the rate estimates are accurate to within 10(exp -7) r/s, …
-
The development of a three-axis trim program for aerodynamic data
<p>This thesis presents the development of a three-axis trim program. The goal of three-axis trim is to position airplane or missile control surfaces at deflection angles which result in zero aerodynamic moments about three orthogonal axes through the vehicle center of gravity. The moment about …
-
A three-axis load cell algorithm development and real-time implementation
… to compute the tool forces applied to a three-axis load cell. The algorithm was implemented on a Zenithn portable computer along with an analog-to-digital converter. The load cell system is capable of monitoring low frequency (under 5 hz), low level (under 10 Ib<sub>f</sub>) tool forces …
-
ENHANCING SPACE SITUATIONAL AWARENESS: CLASSIFICATION OF THREE-AXIS STABILIZED SATELLITES WITH DEEP LEARNING
… contributes new results on the classification of three-axis stabilized satellites from light curves. The wavelet scattering transform (WST) method is employed to generate translation-scale representations of the Starlink and OneWeb satellites' light curves. The output of the WST method is then …
-
Design and simulation of a three-axis stabilized satellite and Kalman filter rate estimator
… Determination and Control Subsystem (ADCS) is a three-axis stabilized spacecraft which requires a control attitude of +/- 1.0 degrees and knowledge attitude of +/- 0.1 degree. Several design aspects are considered in development of attitude control systems for a small satellite, such as: …
-
Analysis of a magnetic three-axis stabilized attitude control system for the NPSAT1 spacecraft
… for attitude determination, to maintain 3-axis stabilization, with a slightly gravity gradient friendly structure. This thesis will examine the performance of three combinations of programs and simulation models for the NPSAT1 satellite attitude control system. The models include a magnetic …
-
Development of a Low-Cost Three-Axis Anemometer for Analysis of Various Wind Phenomena
Distributed three-axis anemometers are needed for high spatial resolution networks to understand the flow of wind for the study of various phenomena. In order to achieve high spatial coverage, the cost of each three-axis anemometer must be reduced while maintaining accuracy and durability. I …
-
Integrated three-axis accelerometers with nanometer scale capacitive gaps and signal conditioning interface IC
This dissertation focuses on implementing multi-axis capacitive MEMS accelerometers with high dynamic range that sense acceleration in wide frequency range (> 10 kHz) with considerable accuracy (< 100 μg/√Hz) by utilizing high aspect ratio (>100:1) nano-gap (< 300 nm) microstructures. Such feature …
-
Design of a three-axis stabilized ORION satellite using an all-thruster attitude control system
An all-thruster three-axis stabilized attitude control system has been designed for the Naval Postgraduate School (NPS) satellite bus, ORION. The satellite is a cylinder, 19 inches in diameter, 35 inches in length, 250 pounds maximum mass with 32 pounds for payloads. ORION will be ejected from an …
Page 1 of 10