Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"three-dimensional FEA"”.

  1. Experimental and Numerical Investigation of Residual Stresses in Shot Peened Flange Pin of Landing Gears

    … and numerically via finite element analysis (FEA) using Abaqus package. The experimental data show that at the surface of the peened flange pin the residual stresses in longitudinal and circumferential direction of the flange pin are all compressive, with the latter much greater than the …

    carleton Repository record for Experimental and Numerical Investigation of Residual Stresses in Shot Peened Flange Pin of Landing Gears (opens in a new tab)

  2. Computer Simulation of Warpage Formation in Injection Molding of a Plastic Step Pad

    … was simulated by using finite element analysis (FEA). A three-dimensional FEA model for a nonlinear polymer material (polypropylene copolymer) with a thermal-structural sequential coupled approach was developed. The effects of mold close time and layout of cooling system on the dimension and …

    sdstate Repository record for Computer Simulation of Warpage Formation in Injection Molding of a Plastic Step Pad (opens in a new tab)

  3. Computational Stress and Deformation Analysis of Mammary Prosthesis

    … this material model would allow for a full three-dimensional finite element model can be developed. With the development of a three-dimensional FEA model the implant buckling and implant stresses could be fully characterized. Ultimately allowing for accurate implant stress estimation and …

    vt Repository record for Computational Stress and Deformation Analysis of Mammary Prosthesis (opens in a new tab)

  4. New Methodology for Predicting Ultimate Capacity of One-Sided Composite Patch Repaired Aluminum Plate

    … used digital image correlation (DIC) and three-dimensional finite element analysis (FEA) with first order elements to study crack tip effects due to the one-sided composite patch applied to center crack tension (CCT) specimens loaded monotonically to failure. The measurable effects on …

    maryland Repository record for New Methodology for Predicting Ultimate Capacity of One-Sided Composite Patch Repaired Aluminum Plate (opens in a new tab)

  5. Structural Assessment of D-Regions Affected by Alkali-Silica Reaction/Delayed Ettringite Formation

    … the unexposed control specimen, while the other three were conditioned in the field with supplemental watering to promote ASR/DEF and served as the exposed specimens. The control and two exposed specimens with various levels of ASR/DEF, after eight months and two years of field conditioning, were …

    tamu Repository record for Structural Assessment of D-Regions Affected by Alkali-Silica Reaction/Delayed Ettringite Formation (opens in a new tab)

  6. Stabilizing techniques for curved steel I-girders during construction

    … prevent excessive rotation in erected girders, three points of vertical support are often provided. Two of these points usually consist of permanent supports in the form of bridge piers or abutments. The third point of support may consist of a temporary support in the form of a shore tower or …

    texas Repository record for Stabilizing techniques for curved steel I-girders during construction (opens in a new tab)

  7. Evaluation of fatigue design load models for cross-frames in steel I-girder bridges

    … techniques. In order to compare load effects, three bridges were instrumented and monitored. The bridges include: i) a straight bridge with normal supports, ii) a straight bridge with skewed supports, and iii) a horizontally curved bridge with radial supports. Data gathered from the field …

    texas Repository record for Evaluation of fatigue design load models for cross-frames in steel I-girder bridges (opens in a new tab)

  8. Finite Element Analysis of Thermoelectric Systems with Applications in Self Assembly and Haptics

    … clusters which have missing elements. While one-dimensional modeling sufficiently describes overall performance in terms of average junction temperatures and net heat flux, it fails when a detailed thermal profile is needed for a non-homogeneous system. For this reason, a three-dimensional model …

    usf Repository record for Finite Element Analysis of Thermoelectric Systems with Applications in Self Assembly and Haptics (opens in a new tab)