Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 424 for “"three-point bending"”.
-
Automation of Orthodontic Wire Tester for Performing Three Point Bending Tests
… treatment. An accurate method to study the threedimensional (3D) force systems and the resulting movements of teeth during orthodontic treatment is needed along with the understanding of the material properties of any orthodontic wire. Until recently, most of the orthodontic biomechanics …
-
Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi-Static Three-Point Bending
… the tensile, compressive, in-plane shear and three-point flexure test, found that the material exhibits tension-compression asymmetry and in-plane anisotropy. Based on the experimental results, a model, which incorporates an anisotropic and asymmetric yield function, is implemented in LS-DYNA …
-
Ultrasonic fatigue of polymer composites: self-heating and damage characterization under cyclic three-point bending
… (CF-PEKK) composites under three-point bending. Increasing amplitude fatigue (IAF) and constant amplitude fatigue (CAF) tests were conducted using an in-house developed ultrasonic system. IAF tests provided fatigue strength estimates based on the thermal response, validated …
-
Dynamic and Quasi-Static Response of Warm and Hot Formed Aluminum Beams Under Three-Point Bending
… temperature forming on the impact resistance of three aluminum alloys, AA6013-T6, AA7075-T6, and a developmental 7000-series alloy (designated AA7xxx-T76). Both die quenching and warm forming processes were considered to investigate their potential to form high strength structural components for …
-
Preliminary Investigation of the Mechanical Properties of Costal Cartilage and Costochondral Junction in Three-Point Bending
… costochondral junction when loaded to failure in three-point bending. Thirty (n=30) total samples were harvested from nineteen (n=19) donors from ages 21 to 98 years (9 Male, 10 Female). 3rd, 4th, 5th, and 6th ribs and costal cartilage were harvested and isolated into CC only and Rib + CC groups …
-
Ultimate Strength Prediction in Fiberglass/Epoxy Beams Subjected to Three-Point Bending Using Acoustic Emission and Neural Networks
… strengths in composite beams subjected to 3-point bending using a neural network analysis of acoustic emission (AE) amplitude distribution data. Fifteen unidirectional fiberglass/epoxy beams were loaded to failure in a 3-point bend test fixture in an MTS load frame. Acoustic emission data …
-
Study the Effects of Core Orientation and Different Face Thicknesses on Mechanical Behavior of Honeycomb Sandwich Structures Under Three Point Bending
… described. A failure mode map for loading under three point bending is developed from previous works by Triantafillou and Gibson26, showing the dependence of failure mode on face sheet to core thickness and honeycomb core ribbon orientation. Beam specimens are tested with the effects of Honeycomb …
-
Investigation of ultrastructural and mechanical properties of rat cortical bone using micro-CT, three-point bending testing, and the reference point indentation technique
… bone as a function of age were assessed with three-point bending testing. Additionally, a novel microindentation technique, termed reference point indentation (RPI),that is capable of in vivo testing was used to assess the mechanical properties of rat bone. These results were compared to …
-
Discrete Element Method Tillage Simulation Incorporating Virtual Postharvest Corn Residue
… midribs, and leaf blades were evaluated using three-point bending tests, shear tests, and tension tests. Simulations of three-point bending were used to validate virtual roots, stalks, and husks. Code to produce randomly generated parametric postharvest corn residue compatible with the discrete …
-
Comparison of Shear Modulus Test Methods
This research compared the results of three tests: ASTM D 198 torsion, ASTM D 198 three-point bending and the five-point bending test (FPBT) using machine-stress-rated (MSR) lumber and laminated veneer lumber (LVL) to determine if the shear properties evaluated by the different test methods were …
-
Real-time high-temperature 3D imaging of the fracture behaviours in an aerospace-grade ceramic-matrix composite
… CMC samples under three-point bending test at room temperature (RT) and 1250 ℃ in Air. 2.5D SiC<sub>m</sub>/SiC<sub>f</sub> CMC displayed a decrease of average flexural strength from 470 ± 44.65 MPa at RT to 365 ± 30.39 MPa at 1250 ℃ which is ~77.5% of RT values. At …
-
Vibrational analysis of growth hormone modulated healing of a canine radial partial ostectomy
… radius were excised and tested by vibration and three point bending. Vibration testing included impact testing, and the development of a transfer function and frequency response curve. From the response curve, the natural frequency of the first bending mode was determined. Also the percent of …
-
Acoustic Emission Characteristics of Metals
… specimens of different dimensions were used. Three-point bending tests were carried out on steel specimens with different notch root radii. The frequency bandwidth of the acoustic emission monitoring system used was 100-300KH2. The output signals were rYecorded on a magnetic tape recorder and …
-
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi
… and ASTM D5573 (for composites in overlay), three point bending tests were performed according to ASTM D790. Analyzing the results of the tests of tension and three point bending tests, it was observed that the composites with the configuration of overlapping had the better elastic module in …
-
Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy
… alloy are examined. The mechanical tests include three point bending, tensile, fatigue, indentation, and microhardness tests. The mechanical tests are applied on Ti-6A1-4V specimens (a) asreceived, (b) as-received heat treated, (c) coated then heat treated and (d) coated without heat treatment. …
-
Acoustic emission and mechanical properties of particle reinforced composites
… counting method was used to measure AE. Three-point bending tests were carried out for the martensitic steel composites and AE was recorded during the fracture test. The alumina appeared to have little effect on the AE from martensitic steel. The elastic modulus and AE attenuation of the …
-
The influence of time-dependent material behavior on the response of sandwich beams
… potential energy, the elastic response of three-layer and five-layer symmetric sandwich beams to mechanical and thermally-induced loads is studied. The sensitivity of the three-layer and five-layer sandwich beams to reductions of the material properties is studied. Using the correspondence …
-
A computational and experimental investigation into the micropolar elastic behaviour of cortical bone
… Micropolar elasticity predicts a size effect in three-point bending, which has been investigated computationally and experimentally on bovine mid-diaphyseal cortical bone. Computational models of an idealised heterogeneous material, with vascular canal-like structures running along the length of …
-
The Fatique Resistance of Surface Hardened Steels
… steels O80M15 and O80A47 has been studied in three point bending fatigue. A range of notch root radii varying from 0.13 mm to 3.17 mm provided different absolute distances within which the fatigue crack propagation is influenced by the notch stress field. The fatigue crack propagation data …
Page 1 of 22