Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"three-point bending test"”.
-
Επίδραση του σησαμιού sesamum indicum (pedaliaceae) στην μετεμμηνοπαυσιακή οστεοπόρωση
… 6 months afterward. Femurs were subjected to a three-point bending test (3PBT). At the end of the study, the weight of the tissues: uterus, abdominal fat, gastrocnemius muscle, heart, left kidney, brain, liver, and their ratio to body weight were examined. Results: Both total and proximal tibial …
-
Characterisation of anode supported microtubular SOFC process on pure methane reduction and operation
… hydrogen. To measure mechanical strength, the three point bending test was employed. Temperature programmed oxidation (TPO) results were investigated to measure the carbon deposition on the anode in order to assess potential damage to the cermet catalyst. Also field emission scanning electron …
-
In vivo εκτίμηση της μηχανικής αντοχής των οστών με τη μέθοδο της περιφερικής ποσοτικής υπολογιστικής τομογραφίας (pQCT). Αξιολόγηση της μεθόδου κάτω από στατικές και δυναμικές συνθήκες άμεσης μηχανική καταπόνησης: πειραματική εργασία σε επίμυες
… of 56 pairs of rat femurs were correlated with three point bending test results and a comparison between static and dynamic mechanical conditions was performed. Results: under static mechanical conditions ultimate strength and stiffness correlated very well with SSI (r=0.91 and r=0.90). Under …
-
Dental zirconia: in-vitro comparison and outcome of methods for veneering, glazing, and chipping repairs
… (C=CrystalConnect,IvoclarVivadent). A Three-point-bending test was performed. For group VM,PM,TF-M,TF-C,CAD-M,CAD-C, ten more bars were prepared and aged with cyclic loading and thermocycling before testing. Zirconia bars …
-
Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates
… beams under flexural loading was investigated. Three point bending test was selected because of its simplicity and the fact that bending stresses are quite common. In this study, two types of adhesively bonded beam specimens were tested: specimens prepared by adhesively bonding two aluminum …
-
Acoustic Emission Characteristics of Metals
… specimens of different dimensions were used. Three-point bending tests were carried out on steel specimens with different notch root radii. The frequency bandwidth of the acoustic emission monitoring system used was 100-300KH2. The output signals were rYecorded on a magnetic tape recorder and …
-
EFFECT OF SELECTED PHASE CHANGE MATERIALS CONCENTRATION AND MANUFACTURING PROCESS ON THE PROPERTIES OF PLASTER MIXTURE SYSTEMS
… Analysis, Differential Scanning Calorimetry, and three-point bending test) and micro-scale analysis methods (i.e., Scanning Electron Microscopy, Energy Dispersive Spectroscopy) to evaluate the effect of PCM on the properties of gypsum wallboards, and the effect of the curing process on the …
-
Comportamento experimental e numérico de bioconcretos de madeira e de painéis sanduíches com faces em laminados reforçados por fibras longas de sisal
… WBC and laminates were developed, and their bending behavior simulated numerically. A mix design method was used to produce workable WBC with wood shavings volumetric fractions of 40, 45 and 50% from different species. Next, relationships within density, compressive strength, water-to-cement …
-
Evaluation of a mechanical anchoring system to improve performance of carbon fiber reinforced polymer mitigated concrete slabs under close in blasts
… the full CFRP strength during flexure. A static three-point-bending test is performed in order to evaluate the efficacy of the anchoring system and to determine a static resistance function. Finally, nonlinear bending analysis is used to validate the test results, and the static test results are …
-
Biomechanics of Bioenergy Sorghum [Sorghum Bicolor (L.) moench]
… sorghum breeding program. In this study, a three-point bending (3PBT) test was used to quantify the biomechanical properties of bioenergy sorghum with different lodging ratings. The 3PBT was able to detect significant statistical differences among genotypes and within their stems. …
-
Vitamin D deficiency, nutritional rickets and osteomalacia: Hidden disease burden and implications for public health prevention policies
… burden remains unexplored. The thesis contains three prospective studies investigating the hidden burden of vitamin D deficiency in: 1) infants presenting with symptomatic deficiency and their family members, 2) a large multi-ethnic newborn cohort and 3) Sudden Unexpected Death in Infancy and …
-
The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration
… was installed in both pure and defect samples. A three point bending test and Tensile tests were carried out to inspect the crack propagation and failure of the specimens. The strength and stiffness of the specimens for both the spacings are compared using the respective Load-Displacement plots. …
-
Development and evaluation of glass fiber-reinforced composite/wood railroad crossties
… a length of 20 in. before subjecting them to three point bending test. These tests were conducted on half scale samples, before and after accelerated aging conditions.;To study the performance of GFRC full scale crossties, fatigue testing was carried out on full scale non-wrapped and GFRC …
-
Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA
… with a 6 x 0.6 mm rectangular slot exit was tested. First, experiments were carried out by varying three process parameters nozzle temperature, layer height, and print speed to identify stable printing conditions. Next, under stable print conditions dimensional accuracy and mechanical …
-
Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA
… with a 6 x 0.6 mm rectangular slot exit was tested. First, experiments were carried out by varying three process parameters nozzle temperature, layer height, and print speed to identify stable printing conditions. Next, under stable print conditions dimensional accuracy and mechanical …
-
Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA
… with a 6 x 0.6 mm rectangular slot exit was tested. First, experiments were carried out by varying three process parameters nozzle temperature, layer height, and print speed to identify stable printing conditions. Next, under stable print conditions dimensional accuracy and mechanical …
-
Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA
… with a 6 x 0.6 mm rectangular slot exit was tested. First, experiments were carried out by varying three process parameters nozzle temperature, layer height, and print speed to identify stable printing conditions. Next, under stable print conditions dimensional accuracy and mechanical …
-
Characterization of new particulate MMC materials and bolted joints through applicable ASTM standards
… a mass of ceramic reinforcement particles. Basic tests like tension test, three point bending test, hardness tests and coefficient of thermal expansion are conducted according to the ASTM standards in order to characterize the material. All these tests are conducted for the matrix alloy, for 30% …
-
The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations
Many current methods of designing and testing Cold In-Place Recycled (CIR) asphalt are undesirable because they require large amounts of material and significant preparation. In an effort to lessen the cost and time of materials testing, this research utilizes several different methods of small …
-
Συγκριτική μελέτη της δράσης αντιδιαβητικών φαρμάκων στην παθογένεια της οστεοπόρωσης
… markers and their right femur was subjected to three-point bending test. Finally, hematoxylin/ eosin staining in addition to RAMAN spectroscopy were employed to access the collagen and mineral properties of the bone.Results: Both incretin- based drugs reduced osteoclast function, however, they …
Page 1 of 5