Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"three-point flexure"”.

  1. Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi-Static Three-Point Bending

    … the tensile, compressive, in-plane shear and three-point flexure test, found that the material exhibits tension-compression asymmetry and in-plane anisotropy. Based on the experimental results, a model, which incorporates an anisotropic and asymmetric yield function, is implemented in LS-DYNA …

    waterloo Repository record for Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi-Static Three-Point Bending (opens in a new tab)

  2. Study of Durability of Epoxy Bonded Joints in Aqueous Environments

    … of the bonded joints were evaluated using a three-point flexure test. The neat epoxy samples were also aged under the same conditions, and three-point flexure test and dynamic mechanical analysis (DMA) were performed to evaluate their mechanical properties. The moisture uptake of the neat …

    vt Repository record for Study of Durability of Epoxy Bonded Joints in Aqueous Environments (opens in a new tab)

  3. Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de magnésio como aditivo

    … The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements, analyzed of the microstructure. The addition of magnesium oxide doesn t cause an improvement of the mechanical strength in relation to material without additive.

    brazil-ufrn Repository record for Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de magnésio como aditivo (opens in a new tab)

  4. Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo

    … The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements. The microstructure was analyzed by scanning electron microscopy. The addition of manganese oxide caused an improvement of the mechanical strength in relation to the material without …

    brazil-ufrn Repository record for Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo (opens in a new tab)

  5. Size effects in out-of-plane bending in elastic honeycombs fabricated using additive manufacturing : modeling and experimental results

    … relative to continuum model predictions in the flexure stiffness of a honeycombed beam loaded in out-of-plane bending. A method of determining the magnitude of that effect for several different methods of constructing or assembling square-celled and hexagonal-celled materials, using both …

    texas Repository record for Size effects in out-of-plane bending in elastic honeycombs fabricated using additive manufacturing : modeling and experimental results (opens in a new tab)

  6. Compatibility Evaluation of Glass/Epoxy Insulation for Use in ITER’s Central Solenoid Superconducting Electromagnets

    … matrix has to be characterized. In this study, three candidate glass types (1581, 7781, and 38050) were considered and their compatibility with a DGEBF epoxy matrix was determined via three-point flexure tests at room temperature (295K) and liquid nitrogen temperature (77K) and constant load …

    ut-knoxville Repository record for Compatibility Evaluation of Glass/Epoxy Insulation for Use in ITER’s Central Solenoid Superconducting Electromagnets (opens in a new tab)

  7. COMPARING THE MECHANICAL PROPERTIES OF CONVENTIONAL, MILLED, AND 3D-PRINTED OCCLUSAL SPLINT MATERIALS: AN IN VITRO STUDY

    … one heat-polymerized (SR IVOcap Clear), and three 3D-Printed (KeySplint Hard, NightGuard Firm2 and RoDIN Splint 2.0) resin materials were evaluated. Flexural strength, flexural modulus and surface hardness were measured. The three-point flexure test was used for the determination of flexural …

    marquette Repository record for COMPARING THE MECHANICAL PROPERTIES OF CONVENTIONAL, MILLED, AND 3D-PRINTED OCCLUSAL SPLINT MATERIALS: AN IN VITRO STUDY (opens in a new tab)

  8. Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες

    … was used for the numerical simulation of a three-point flexure test using the material properties obtained from this research.Based on the test results, the mixture with high volume (6%) and a combination of two lengths of steel fibres (3% each), water to binder ratio of 0.16% and 6.1% of …

    greece Repository record for Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες (opens in a new tab)

  9. Development and assessment of ultra-high performance fibre-reinforced composite panels

    … reinforcement are produced and tested under three-point flexure in both directions to understand the full-range flexural behaviour of the system. The panels display high load capacity and ductility and their behaviour dependent on the reinforcement detail, with GFRP reinforced specimens …

    adelaide Repository record for Development and assessment of ultra-high performance fibre-reinforced composite panels (opens in a new tab)

  10. Eutectic-based self-nanoemulsified drug delivery systems for solid oral dosage forms

    … solid formulation. Heckel analysis, three point flexure test, and profilometry were applied in the study. Avicel PH-105 demonstrated a sustained release effect with minimum yield and tensile strength. Among the MCC grades, Avicel® PH-112, with an average diameter of 90 ^m and moisture …

    ttu Repository record for Eutectic-based self-nanoemulsified drug delivery systems for solid oral dosage forms (opens in a new tab)