Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"threshold strain"”.
-
Investigation of Shear Modulus and Material Damping of a Lightly Cemented Silty Sand Representing Offshore Soil
… an increase in cement content reduces the linear threshold strain of the material for both shear modulus reduction curves and damping curves. This behavior continues until a threshold cement content is reached. Beyond this, the linear threshold strain begins to increase, making linear threshold …
-
Effect of Preshaking on Cyclic Resistance of Clean Sand – A Laminar Box Study
… the shakings to reach a reference liquefaction-threshold shear strain level of 0.01%. This reference strain was chosen in this study as it is known that it's only after this threshold strain level, onset of large pore pressures develops, and liquefaction occurs (Dobry et al. 1982). This study …
-
RFID Sensor-Driven Structural Condition Monitoring in Integrated Building Information Modeling Environment
… Frequency Identification (RFID) based wireless strain sensor technologies to enable automated structural condition assessment. BIM can serve as an ideal 4-dimensional graphical computing environment for integrating structural health monitoring (SHM) with management practice, which often involves …
-
Effects of Impact Deformation on Material Microstructure
The effects of varying ambient temperature and strain rate on the microstructure of metals deformed to large plastic strains are investigated. At room temperature, dynamically-deformed samples (DDS) become softer, in contrast to quasi-statically deformed samples, which show hardnesses close to the …
-
Direct in-situ evaluation of liquefaction susceptibility
… is to observe the relationship between shear strain in the soil and the resulting generation of excess pore water pressure. This fundamental relationship dictates whether or not a soil will liquefy during an earthquake event. The direct in-situ evaluation of liquefaction susceptibility …
-
Thermo- Mechanical Modeling of the Volvo Varestraint Test with the Aid of Finite Element Method
… a simulative weldability test, a so called Varestraint machine, to run real-life testing on plates by applying augmented strain and welding simultaneously. The aim is to fundamentally study the cracks by forcing them to occur. The purpose of this master thesis was to design and validate a …
-
Geomaterials subjected to repetitive loading: implications on energy systems
… characteristics of soil behavior, such as threshold strain, terminal density, and long-term ratcheting. Numerical results show that shallow foundations subjected to repetitive loading experience strain accumulation and stress redistribution. On the other hand, the long-term behavior of …
-
Kinematics of Cervical Spinal Column Injury
… evaluated in this study is that there exists a strain rate criteria for the components of the cervical spine, such that strain rate is an indicator of a dynamic failure point which corresponds to a failure strain value. The threshold strain rates (mm/mm/msec) were -0.17 for vertebral bodies in …
-
A Quantitative Study of the Weldability of Inconel 718 Using Gleeble and Varestraint Test Methods
… and compared to Haynes 230 using Gleeble and Varestraint mechanical test methods. Hot cracking susceptibility was examined in either alloy using a sub-scale Varestraint test method at 5 augmented strain levels: 0.25%, 05.%, 1%, 2%, and 4%. Maximum crack length, total crack length, and number of …
-
Influence of some particle characteristics on the small strain response of granular materials
The key parameters representing the small strain response of geomaterials are the very small strain shear modulus, Gmax, shear modulus degradation G/Gmax, and damping ratio. These are also important parameters in the design of foundations where only small deformation takes place. A review of the …
-
Pore pressure generation characteristics of sands and silty sands: a strain approach
… to cause liquefaction, this study adopted a strain approach because excess pore water pressure generation is controlled mainly by the level of induced shear strains. This approach was first proposed by Dobry et al. (1982). Multiple series of strain-controlled cyclic direct simple shear and …
-
Development of constitutive models for linear and nonlinear shear modulus and material damping relationships of uncemented soils
… measurements have been made over shear strains ranging from about 1×10⁻⁶ to 0.3 %. Most recently, measurements of the initiation of pore-water pressure generation in nearly to saturated poorly-graded sands and low-plasticity silts have been conducted during torsional shear (TS) testing. …
-
Assessment of the Cyclic Strain Approach for the Evaluation of Initial Liquefaction
… evaluation procedures include the stress-based, strain-based, and energybased based approaches. The existence of a volumetric threshold shear strain, γtv, under which there is no development of excess pore pressures, and the unique relationship between pore pressure ratio and cyclic shear strain, …
-
Rate Effects in Fine Grained Soils
The strain rate dependent behaviour of fine grained soils is an important aspect of geotechnical engineering. During dynamic or rapid events such as earthquakes and rapid pile testing, a fine grained soil will display significantly different behaviour than may be observed over the long life span of …
-
Characterization of pile driving induced ground motions
… thousands of loading cycles. The vibration threshold strain assumed in the literature for seismic events needs to be reduced.
-
Multiscale characterization of mechanochemical reactions in mechanophore-crosslinked polymers under shear loading
… fluorescence imaging is used to determine the threshold stress and strain required for activation as a function of strain rate and polymer architecture, both of which have a significant effect on mechanochemical activity of spiropyran in the bulk polymer. Increasing the strain rate leads to an …
-
Dynamic Response Evaluation of Loose Gravelly Soils in Centrifuge Modeling Experiments
… element tests were utilized to characterize low-strain dynamic properties. A series of centrifuge tests were conducted to investigate the impact of soil composition on the progressive response across a wide range of shear strains. A series of centrifuge tests were conducted at 50-g centrifuge …
-
Nonlinear macroscopic description of liquid crystalline elastomers in external fields
… material. This leads to compressive and dilative strain deformations. Finally, we study the specific stress-strain behavior of nematic SCLSCEs. It has been found for nematic SCLSCEs stretched perpendicularly to the initial director orientation that their director reorients towards the stretching …
-
Tuneable liquid crystal elastomer devices with electric-field induced alignment
… electro-optical experiments to characterise the threshold voltage of the IALCE precursor, which was determined to be 0.9 ± 0.1 Vrms. Together with the measured elastic constants (K11 = 4.6 pN and K33 = 4.3 pN), we construct a detailed schematic illustrating the relationship between applied …
-
Evaluation of the hot cracking sensitivity of 316 NG, 347 and 304 stainless steels using the hot ductility test and the modified subscale varestraint test
… cracking tendency.</p> <p>A new multi-bead varestraint technique was developed which provides simultaneous evaluation of the base metal HAZ, weld metal HAZ and the fusion zone of the as-deposited pass. The hot ductility test was conducted on the Gleeble using standard parameters.</p> <p>Both, …
Page 1 of 2