Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"time-temperature transformation"”.

  1. Glass transition and crystallization of amorphous pharmaceuticals: Time-temperature-transformation diagram and crystallization suppression

    … To better understand this glass-crystal phase transformation, it is necessary to understand the basic physical of glass material and the crystallization kinetics. The goal of my PhD projects it to study the correlation between the glassy dynamics and the crystallization tendency, also study the …

    ttu Repository record for Glass transition and crystallization of amorphous pharmaceuticals: Time-temperature-transformation diagram and crystallization suppression (opens in a new tab)

  2. Investigation into the transformation products of CD3MN cast duplex stainless steel

    <p>The transformation products for CD3MN cast duplex stainless steel (DSS) were investigated between the temperatures of 600 to 9500C. The primary research evaluated the kinetics of sigma ([Sigma]) phase formation by developing the time-temperature-transformation diagram for CD3MN and comparing …

    iastate Repository record for Investigation into the transformation products of CD3MN cast duplex stainless steel (opens in a new tab)

  3. Development of post-deposition heat treatment to improve mechanical properties of wire-arc additive manufactured ATI 718Plus superalloy

    … simulation tools were used to develop Time-Temperature-Transformation (TTT) diagrams and to investigate growth kinetics of η phase in the WAAM ATI 718Plus. Based on the analyses, appropriate heat treatments capable of precipitating a moderate amount of η phase are selected and …

    manitoba Repository record for Development of post-deposition heat treatment to improve mechanical properties of wire-arc additive manufactured ATI 718Plus superalloy (opens in a new tab)

  4. Cure Kinetics and Processing Parameters of Neat and Reinforced High Performance Epoxy Resins: Evaluation of Techniques

    … are followed by shifts in glass transition temperature determined by DSC and temperature-modulated DSC (TMDSC), thermomechanical (TMA) and dynamic mechanical (DMA) analysis and thermally stimulated depolarization (TSD). Changes in viscosity, also indicative of degree of conversion, are …

    unt Repository record for Cure Kinetics and Processing Parameters of Neat and Reinforced High Performance Epoxy Resins: Evaluation of Techniques (opens in a new tab)

  5. Determination of the structure-processing-properties relationship of Fe-6.5wt%Si

    … structure alongside processing parameters a time temperature transformation curve can be generated.</p>

    iastate Repository record for Determination of the structure-processing-properties relationship of Fe-6.5wt%Si (opens in a new tab)

  6. Crystallization of Synthetic Blast Furnace Slags Pertaining to Heat Recovery

    … treatment and non-isothermal cooling. Their time-temperature-transformation (TTT) and continuous-cooling-transformation (CCT) diagrams were plotted and compared with each other. Furthermore, kinetic parameters such as the Avrami exponent (n), rate coefficient (K) and effective activation …

    toronto-retro Repository record for Crystallization of Synthetic Blast Furnace Slags Pertaining to Heat Recovery (opens in a new tab)

  7. Adaptive Machine Learning Framework for Microstructural Optimization and Mechanical Performance Prediction in Steels

    … and performance, precise control of phase transformation is essential to achieve pre-determined properties. To understand transformation routes in different steel grades, time-temperature-transformation (TTT) and continuous-cooling-transformation (CCT) diagrams are necessary and can be …

    must-thes Repository record for Adaptive Machine Learning Framework for Microstructural Optimization and Mechanical Performance Prediction in Steels (opens in a new tab)

  8. Improving process stability and ductility in laser sintered polyamide

    … and establishing a baseline for modeling the time-temperature-transformation of production-grade, laser-sintered polymers. The background shows that there has been a significant amount of research to map processing parameters to mechanical properties and that industry has been focused on …

    texas Repository record for Improving process stability and ductility in laser sintered polyamide (opens in a new tab)

  9. Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.

    … are followed by shifts in glass transition temperature determined by DSC, temperature-modulated DSC (TMDSC), step scan DSC and high speed DSC, thermomechanical (TMA) and dynamic mechanical (DMA) analysis and thermally stimulated depolarization (TSD). Changes in viscosity, also indicative of …

    unt Repository record for Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy. (opens in a new tab)

  10. Thermal rheological analysis of cure process of epoxy prepreg

    … with the experimental data, especially at high temperatures. To account for the effect of diffusion on the cure rate, a diffusion factor was introduced into the model. The modified model greatly improved the predicated data at the late stage of cure reaction. The dynamic cure process was …

    lsu-thes Repository record for Thermal rheological analysis of cure process of epoxy prepreg (opens in a new tab)

  11. The Implications of the Halogen Atom on the Physical Stability of Amorphous Solid Dispersions

    … to increasing its crystallization onset time (tcrys) for recrystallization, relative to analogous unhalogenated tolbutamide, which is incapable of X-bonding. In this work, strong and relatively weaker X-bonds were spectroscopically determined for bromopropamide-PVPVA and …

    duquesne Repository record for The Implications of the Halogen Atom on the Physical Stability of Amorphous Solid Dispersions (opens in a new tab)

  12. Phase transformations in cast duplex stainless steels

    … chi (chi) can also form during casting or high-temperature processing and can degrade the properties of the DSS. This research was initiated to develop time-temperature-transformation (TTT) and continuous-cooling-transformation (CCT) diagrams of two types of cast duplex stainless steels, CD3MN …

    iastate Repository record for Phase transformations in cast duplex stainless steels (opens in a new tab)

  13. A constitutional study of a dual phase steel containing 12% chromium

    … The objectives included the detennination of time-temperature-transformation (TTT) diagrams for the transformations between austenite and ferrite and an investigation into the factors controlling these reactions. The austenite decomposition reaction for a high nickel alloy, 3CR12Ni, and the …

    cape-town Repository record for A constitutional study of a dual phase steel containing 12% chromium (opens in a new tab)

  14. Crystallisation Behaviour and Heat Transfer Phenomenon of Fluoride-free Mould Fluxes for Steel Continuous Casting

    … 7 degree Celsius/s and the shortest incubation time was 15 s at 1000 degree Celsius. Dominant precipitate was Ca2SiO4 at 950 and 1100 degree Celsius with minor Na2CaSi3O8 and Ca2MgSi2O7. Cuspidine was only found at 950 degree Celsius. For fluoride-free mould fluxes, the effects of CaO/SiO2 …

    unsw Repository record for Crystallisation Behaviour and Heat Transfer Phenomenon of Fluoride-free Mould Fluxes for Steel Continuous Casting (opens in a new tab)

  15. Structure-property relationships of electron beam cured systems containing bis-GMA

    … called bis-GMA, is a viscous liquid at room temperature which crosslinks to form a glassy network when a 3 to 5 mil coating is irradiated with sufficient energy. The major parameters which were systematically varied in this study were radiation dosage, dose rate, aging time after irradiation, …

    vt Repository record for Structure-property relationships of electron beam cured systems containing bis-GMA (opens in a new tab)

  16. Energetic Considerations and Structural Characterization of Twinning in Nanowires

    … facilitate structural analysis of nanowires. A time-temperature-transformation diagram of platinum nanowires in chemical synthesis was determined to help optimize the fabrication process of the nanowires.

    vt Repository record for Energetic Considerations and Structural Characterization of Twinning in Nanowires (opens in a new tab)

  17. Microstructural Characterization and Shape Memory Response of Ni-Rich NiTiHf and NiTiZr High Temperature Shape Memory Alloys

    NiTiHf and NiTiZr high temperature shape memory alloys (HTSMAs) have drawn a great deal of attention as cheaper alternatives to Pt, Pd and Au alloyed NiTi-based HTSMAs while NiTiZr alloys also providing at least 20% weight reduction then its NiTiHf counterparts with the same stoichiometry. (Ti + …

    tamu Repository record for Microstructural Characterization and Shape Memory Response of Ni-Rich NiTiHf and NiTiZr High Temperature Shape Memory Alloys (opens in a new tab)

  18. CRITICAL COOLING RATES FOR GLASS FORMATION OF ZR-AL-CU-NI AND MG-NI-ND ALLOYS

    … determined using three methods, namely, from Time-Temperature-Transformation (TTT) curves, from Continuous Cooling Transformation (CCT) curves and from thermal analytical measurements. These alloys were rapidly solidified by chill-block melt-spinning to produce ribbons between 40 to 100 µm in …

    nus Repository record for CRITICAL COOLING RATES FOR GLASS FORMATION OF ZR-AL-CU-NI AND MG-NI-ND ALLOYS (opens in a new tab) Download file for CRITICAL COOLING RATES FOR GLASS FORMATION OF ZR-AL-CU-NI AND MG-NI-ND ALLOYS (opens in a new tab)

Page 1 of 2