Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"tip design"”.

  1. Designing and testing unloaded-tip propellers for improved efficiency and reduced noise.

    … aircraft. This thesis examines novel unloaded-tip propeller designs on the basis of efficiency and noise using a new static propeller test stand. 13" diameter propellers with unloaded tips were manufactured from different materials to assess the influence of blade stiffness on propulsive and …

    baylor Repository record for Designing and testing unloaded-tip propellers for improved efficiency and reduced noise. (opens in a new tab)

  2. High-speed imaging and computational modelling of close-coupled gas atomization

    … for atomization industries. Melt delivery nozzle design is one of the key factors to control powders properties. The optical Schlieren technique and analogue water atomizer along with Computational Fluid Dynamics (CFD) numerical methods are practical methods for observing the single or two-phase …

    whiterose Download PDF for High-speed imaging and computational modelling of close-coupled gas atomization (opens in a new tab)

  3. DEVELOPMENT AND TESTING OF A NEW AIR-ASSISTED FLARE SYSTEM FOR LOW FLOW CONDITIONS

    … lower flows of flare gas than they are optimally designed to process. This cause insufficient mixing energy to efficiently mix the flare gas with ambient air. To enhance mixing at these low flow rate conditions without using auxiliary purge fuel or additional assistant medium, a new flare tip …

    must-thes Repository record for DEVELOPMENT AND TESTING OF A NEW AIR-ASSISTED FLARE SYSTEM FOR LOW FLOW CONDITIONS (opens in a new tab)

  4. Acoustic source and data acquisition system for a helicopter rotor blade-vortex interaction (BVI) noise reduction experiment

    … with BVI noise reduction by rotor blade tip design modifications. Potentially much can be learned regarding the prospect for success of a candidate rotor blade design at greatly reduced time and money by performing acoustic scattering measurements in an anechoic chamber. It is proposed …

    nps Repository record for Acoustic source and data acquisition system for a helicopter rotor blade-vortex interaction (BVI) noise reduction experiment (opens in a new tab)

  5. ΕΠΕΙΓΟΥΣΑ ΔΙΑΘΩΡΑΚΙΚΗ ΤΕΧΝΗΤΗ ΒΗΜΑΤΟΔΟΤΗΣΗ ΤΗΣ ΚΑΡΔΙΑΣ ΜΕ ΕΙΔΙΚΗΣ ΚΑΤΑΣΚΕΥΗΣ ΗΛΕΚΤΡΟΔΙΟ. (ΠΕΙΡΑΜΑΤΙΚΗ ΜΕΛΕΤΗ)

    IN THIS STUDY THE EFFICACY OF A NEWLY DESIGNED ELECTRODE FOR AN EMERGENCY TRANSTHORACIC PACING WAS EXPERIMENTALLY EVALUATED AND THE COMPLICATIONS FROM ITS MYOCARDIAL APPLICATION WERE STUDIED. THIS NEW DEVICE CONSIST OF A THIN, FLEXIBLE INSULATED STEINLESS STEEL WIRE THAT IS INTRODUCED INTO THE …

    greece Repository record for ΕΠΕΙΓΟΥΣΑ ΔΙΑΘΩΡΑΚΙΚΗ ΤΕΧΝΗΤΗ ΒΗΜΑΤΟΔΟΤΗΣΗ ΤΗΣ ΚΑΡΔΙΑΣ ΜΕ ΕΙΔΙΚΗΣ ΚΑΤΑΣΚΕΥΗΣ ΗΛΕΚΤΡΟΔΙΟ. (ΠΕΙΡΑΜΑΤΙΚΗ ΜΕΛΕΤΗ) (opens in a new tab)

  6. Dual-fuel injector design concepts through predictive numerical tools

    … system complexity because of the need for multiple injectors or a design with multiple nozzles or needles. A single and simple injector capable of precisely delivering fuel across the entire operation range (dualfuel and Diesel-only modes) is the suitable solution to mitigate those drawbacks …

    city-london Download PDF for Dual-fuel injector design concepts through predictive numerical tools (opens in a new tab)

  7. Unshrouded turbine blade tip heat transfer and film cooling

    … the heat transfer to unshrouded turbine blade tips suitable for use in high bypass ratio, large civil aviation turbofan engines. Both the heat transfer to the blade tip and the over-tip leakage flow over the blade tip are characterised, as each has a profound influence on overall engine …

    oxford Repository record for Unshrouded turbine blade tip heat transfer and film cooling (opens in a new tab)

  8. Fabrication, packaging, and application of micromachined hollow polymer needle arrays

    … micromolds approach to construct a pyramidal-tip hollow microneedle array with an integral baseplate and fluidic manifold. The developed process ultimately resulted in the ability to fabricate a 10×10 array of hollow SU-8 microneedles measuring 825 μm in height, 400 μm in width, and possessing …

    gatech Repository record for Fabrication, packaging, and application of micromachined hollow polymer needle arrays (opens in a new tab)

  9. Design, Analysis, Optimization and Control of Rotor Tip Flows

    … over the past decades, the turbine tip design presents numerous challenges to the engine manufacturers, and remains the primary factor defining the machine durability for the periodic removal of the turbine components during overhaul. Due to the hot gases coming from the upstream …

    purdue-thes Repository record for Design, Analysis, Optimization and Control of Rotor Tip Flows (opens in a new tab)

  10. Multi-point aerodynamic optimisation of sailplane horizontal tailplanes

    … analysis in the verification process. The design of new horizontal tailplane tip sections was also performed with the use of CFD. Firstly the elevator span to horizontal tailplane span ratio best suited to the operating spectrum of the horizontal tailplane was evaluated. Secondly a wingtip …

    nwu-za Repository record for Multi-point aerodynamic optimisation of sailplane horizontal tailplanes (opens in a new tab)

  11. Μελέτη της ροής υγρών διακλυσμού σε ριζικούς σωλήνες με εφαρμογή μεθόδων υπολογιστικής ρευστοδυναμικής

    … used to investigate the effect of needle tip design, needle insertion depth, apical preparations size and root canal taper on the irrigant flow. The flow pattern of the open-ended needles was different from the closed-ended needles resulting in more irrigant replacement in front of the …

    greece Repository record for Μελέτη της ροής υγρών διακλυσμού σε ριζικούς σωλήνες με εφαρμογή μεθόδων υπολογιστικής ρευστοδυναμικής (opens in a new tab)

  12. The effect of size and void configuration on the stress intensity factor of regular and stochastic porous materials

    … each specimen is actually characterised by multiple, local stress intensities, depending on the relative location between the heterogeneity and the crack tip. Design of Experiments was employed to provide insight on how a heterogeneity's location can be designed to either amplify or diminish …

    strathclyde Repository record for The effect of size and void configuration on the stress intensity factor of regular and stochastic porous materials (opens in a new tab)

  13. Full Coverage Vane, Blade Tip, and Blade Trailing Edge Film Cooling for Gas Turbine Applications Using the Pressure Sensitive Paint Measurement Technique

    … on vane surfaces as well as on the blade tip and trailing edge using the pressure sensitive paint (PSP) measurement technique. The first study is an experimental study of film cooling effectiveness on two real scale turbine vanes in a 3-vane annular cascade. The cascade is connected to a …

    tamu Repository record for Full Coverage Vane, Blade Tip, and Blade Trailing Edge Film Cooling for Gas Turbine Applications Using the Pressure Sensitive Paint Measurement Technique (opens in a new tab)

  14. Design and applications of an improved capillary electrophoresis - electrospray ionization - mass spectrometry interface

    … The new interface uses a flow-through microvial design and a bevelled sprayer tip geometry. The capillary column terminus is surrounded by a tapered stainless steel hollow needle, and the interior of the needle tip acts as the CE outlet while its exterior tip surface provides the electrode …

    ubc Repository record for Design and applications of an improved capillary electrophoresis - electrospray ionization - mass spectrometry interface (opens in a new tab) Download PDF for Design and applications of an improved capillary electrophoresis - electrospray ionization - mass spectrometry interface (opens in a new tab)

  15. Design, Modeling, Imaging, and Control of a Robotically Steerable Transcatheter Delivery System

    … robotic transcatheter system, the steerable end tip design is optimized for effective implant deployment and the actuation system is refined for adequacy and compactness. Relevant clinical features are incorporated to enable intravascular surgery, intuitive control is demonstrated via joystick, …

    gatech Repository record for Design, Modeling, Imaging, and Control of a Robotically Steerable Transcatheter Delivery System (opens in a new tab)

  16. A theoretical study of rotor forces and torques in helical twin screw compressors

    … forces must be taken into consideration at the design stage. In this study, a computer program for analysing the forces in a twin screw compressor has been developed. It takes into account all significant factors and includes a rotor profile generation program and a geometrical characteristics …

    strathclyde Repository record for A theoretical study of rotor forces and torques in helical twin screw compressors (opens in a new tab)

  17. Heated Atomic Force Microscope Cantilevers For Polymer Based Additive Nanomanufacturing

    This dissertation demonstrates the design, simulation, fabrication and characterization processes of a novel heated atomic force microscope cantilever for polymer based additive nanomanufacturing. Fabrication and integration of heterogeneous nanostructures is an essential task for manufacturing …

    tamu Repository record for Heated Atomic Force Microscope Cantilevers For Polymer Based Additive Nanomanufacturing (opens in a new tab)

  18. Aero-thermal performance and enhanced internal cooling of unshrouded turbine blade tips

    <p>The tips of unshrouded, high-pressure turbine blades are prone to significantly high heat loads. The gap between the tip and over-tip casing is the root cause of undesirable over-tip leakage flow that is directly responsible for high thermal material degradation and is a major source of …

    oxford Repository record for Aero-thermal performance and enhanced internal cooling of unshrouded turbine blade tips (opens in a new tab)

  19. Aero-thermal performance of transonic high-pressure turbine blade tips

    … experimental and theoretical study of unshrouded tips on gas turbine blades with and without winglets. The goal of the winglet tip design is to reduce over-tip leakage flow. To assess the potential use of winglets, their effectiveness in reducing loss and the cooling scheme's effectiveness must be …

    oxford Repository record for Aero-thermal performance of transonic high-pressure turbine blade tips (opens in a new tab)

Page 1 of 2