Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 56 for “"tip gap"”.

  1. Some Features of Tip Gap Flow Fields of a Linear Compressor Cascade

    … study of three-dimensional turbulent tip gap flows in the linear cascade wind tunnel, for two different tip gap clearances (t/c=1.65% and 3.3%). The experiments focus on near-wall flow field measurements for the stationary wall and moving wall, and static pressure measurement on the …

    vt Repository record for Some Features of Tip Gap Flow Fields of a Linear Compressor Cascade (opens in a new tab)

  2. Tip gap noise mechanisms in ducted marine propellers due to unsteady flow features

    … to investigate the unsteady flow features in the tip gap region of a ducted propeller. By inferring the important noise mechanisms it is possible to identify specific criteria which can be used to produce noise mitigating designs. A variety of simplified geometries have been investigated beginning …

    soton Download PDF for Tip gap noise mechanisms in ducted marine propellers due to unsteady flow features (opens in a new tab)

  3. Aeroelastic Investigation of a Circumferentially Varying Tip Gap in an Axial Compressor Rotor

    The tip leakage flow in axial compressors is a significant factor in engine performance and a subject of investigation over the last several decades. Many studies have already shown that the vortices generated by this tip leakage can have a negative impact on the surrounding flow field and overall …

    ucf Repository record for Aeroelastic Investigation of a Circumferentially Varying Tip Gap in an Axial Compressor Rotor (opens in a new tab)

  4. Measurements of the Tip-gap Turbulent Flow Structure in a Low-speed Compressor Cascade

    … presents results from a thorough study of the tip-gap turbulent flow structure in a low-speed linear compressor cascade wind tunnel at Virginia Tech that includes a moving belt system to simulate the relative motion between the tip and the casing. The endwall pressure measurements and the …

    vt Repository record for Measurements of the Tip-gap Turbulent Flow Structure in a Low-speed Compressor Cascade (opens in a new tab)

  5. An experimental investigation of turbine blade tip heat transfer and tip gap flows in the supersonic regime

    Gas turbine blade tip heat transfer and tip gap flow phenomena has been explored experimentally in a stationary cascade for blade exit Mach numbers = 1.2 to 1.4. Experimental results were found to agree well with qualitative predictions performed at GE Aircraft Engines. The pressure distribution in …

    vt Repository record for An experimental investigation of turbine blade tip heat transfer and tip gap flows in the supersonic regime (opens in a new tab)

  6. Correlation between Unsteady Loading and Tip Gap Flow Occurring in a Linear Cascade with Simulated Stator-Rotor Interaction

    … to a moving end wall. In this investigation, the tip clearance was varied from 0.83% to 12.9% chord. Measurements of the midspan and the tip blade loading were made using static pressure taps. The tip loading shows that the minimum suction surface pressure coefficient increases in magnitude …

    vt Repository record for Correlation between Unsteady Loading and Tip Gap Flow Occurring in a Linear Cascade with Simulated Stator-Rotor Interaction (opens in a new tab)

  7. EFFECTS OF TIP GAP SIZES AND OPERATING CONDITIONS ON THE FLOW STRUCTURES AND THE COMPLEX TURBULENCE IN THE TIP REGION OF AN AXIAL COMPRESSOR ROTOR

    The flow and turbulence in the tip region of an axial compressor rotor are studied experimentally in an optical refractive index-matched facility. Flow visualization and stereo-PIV measurements are performed with two different tip gap sizes at two flow rates. Increasing the tip clearance causes a …

    jhu Repository record for EFFECTS OF TIP GAP SIZES AND OPERATING CONDITIONS ON THE FLOW STRUCTURES AND THE COMPLEX TURBULENCE IN THE TIP REGION OF AN AXIAL COMPRESSOR ROTOR (opens in a new tab)

  8. Tip leakage flow in a linear turbine cascade

    … performed to study the details of flow in the tip clearance gap of a linear turbine blade cascade. The cascade was designed and built to be geometrically similar to the earlier VPI&SU cascade; however, the new cascade also had a tip gap (2.1 percent of blade height) and two endwall boundary …

    vt Repository record for Tip leakage flow in a linear turbine cascade (opens in a new tab)

  9. Tip leakage losses in a linear turbine cascade

    An investigation of tip leakage flow and its effects on loss production was performed on a large-scale linear turbine cascade having a tip gap measuring 2.1% of the blade height. The Reynolds number based on axial chord and cascade exit velocity was 4.5x10⁵. The experimental work began with a …

    vt Repository record for Tip leakage losses in a linear turbine cascade (opens in a new tab)

  10. Active Control of Tip Leakage Vortex using DBD Plasma Actuators

    In a turbomachine rotor, the gap between the rotor tip and the stationary casing creates tip-leakage vortices. These vortices act like a blockage to the incoming passage flow and effectively reduce the pressure ratio across the rotor stage, cause unsteadiness and vibration of the rotor tip, and …

    ucf Repository record for Active Control of Tip Leakage Vortex using DBD Plasma Actuators (opens in a new tab)

  11. Measurements of Cooling Effectiveness Along the Tip of a Turbine Blade

    … and pressure side injection on a turbine blade tip. Holes on the tip called dirt purge holes expel dirt from the blade, so other holes are not clogged. Wind tunnel tests are used to observe how effectively dirt purge and microcircuit designs cool the tip. Tip gap size and blowing ratio are …

    vt Repository record for Measurements of Cooling Effectiveness Along the Tip of a Turbine Blade (opens in a new tab)

  12. Turbulence and Sound Generated by a Rotor Operating Near a Wall

    … a strong flow reversal in the wall-rotor tip gap was observed. Average velocity fields filtered by the angular position of the rotor show that the flow reversal is fed by jets of fluid that tend to form below the blade as it passes by the wall. Instantaneous velocity measurements show the …

    vt Repository record for Turbulence and Sound Generated by a Rotor Operating Near a Wall (opens in a new tab)

  13. Performance improvements to the Naval Postgraduate School Turbopropulsion Labs Transonic Axially Splittered Rrotor

    … This study advanced the understanding of casing tip gap, rotor-stator interaction, stator relative blade placement of a hybrid tandem/splittered design, and performance benefits. The reduction in rotor tip gap produced higher performance bench marks as predicted. The addition and analysis of …

    nps Repository record for Performance improvements to the Naval Postgraduate School Turbopropulsion Labs Transonic Axially Splittered Rrotor (opens in a new tab)

  14. Flowfield Downstream of a Compressor Cascade with Tip Leakage

    … blade, 7 passage linear compressor cascade with tip leakage was built. The flowfield downstream of the cascade was measured using four sensor hot-wire anemometers, from which the mean velocity field , the turbulence stress field and velocity spectra were obtained. Oil flow visualizations were …

    vt Repository record for Flowfield Downstream of a Compressor Cascade with Tip Leakage (opens in a new tab)

  15. Tip leakage loss development in a linear turbine cascade

    Tip leakage losses were studied in a linear turbine cascade with a tip clearance gap equal to 2.1 percent of blade height. The blades of the cascade have a turning angle of 109.4 degrees, an aspect ratio of 1.0, and an axial chord length of 235.2 mm. The cascade was located at the exit of a low …

    vt Repository record for Tip leakage loss development in a linear turbine cascade (opens in a new tab)

  16. Experimental and Computational Study of Heat Transfer on a Turbine Blade Tip with a Shelf

    … temperature of the turbine materials. The gap between rotating turbine blades and the stationary shroud provides an unintended flow path for hot gases. Gases that flow through the tip region cause pressure losses in the turbine section and high heat loads to the blade tip. This thesis …

    vt Repository record for Experimental and Computational Study of Heat Transfer on a Turbine Blade Tip with a Shelf (opens in a new tab)

  17. Numerical analysis of a Wells turbine with flexible trailing blade edges

    … against previous experimental work, the turbine tip gap and elastic modulus of the solid region are varied, and the resulting performance and flow field changes are examined. Each turbine with morphing blades performed better than its corresponding rigid counterpart, regardless of the degree of …

    alabama Repository record for Numerical analysis of a Wells turbine with flexible trailing blade edges (opens in a new tab)

  18. Film Cooling Predictions Along the Tip and Platform of a Turbine Blade

    … dirt purge holes, located along the blade tip, and platform leakage flow, which result from gaps between various turbine components. Microcircuits are a novel cooling technique involving small air passages placed near the airfoil surface to enhance internal cooling. This study evaluated the …

    vt Repository record for Film Cooling Predictions Along the Tip and Platform of a Turbine Blade (opens in a new tab)

Page 1 of 3