Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"tip leakage vortex"”.
-
Dynamics of Tip Leakage Vortex in a Transonic Fan
… look at the behavior of the flow field in the tip region of the rotor. The tip leakage flow emerging from the clearance gap is divided into different segments depending on their behavior in the blade passage. This behavior is mostly characterized by their contribution to the blockage. The …
-
Reynolds stress measurements in a turbine tip leakage vortex
… study of the structure of turbulence in a tip leakage vortex was conducted in a large scale, linear turbine cascade. The study was performed in a cross sectional plane 0.96 of the axial chord length downstream of the blade leading edge. The cascade consisted of five blades with an aspect …
-
Active Control of Tip Leakage Vortex using DBD Plasma Actuators
… a turbomachine rotor, the gap between the rotor tip and the stationary casing creates tip-leakage vortices. These vortices act like a blockage to the incoming passage flow and effectively reduce the pressure ratio across the rotor stage, cause unsteadiness and vibration of the rotor tip, and lead …
-
Numerical simulations of the tip leakage vortex in a waterjet pump using a Reynolds averaged approach
… present in these axial pumps, such as the tip leakage vortex (TLV) [1, 2]. Experiments are time and resource consuming, which is pushing the use of computational methods in order to provide accurate and faster results. The aim of this project is to provide a good prediction of the TLV …
-
Formation and Development of the Tip Leakage Vortex in a Simulated Axial Compressor with Unsteady Inflow
The interaction between rotor blade tip leakage vortex and inflow disturbances, such as encountered in shrouded marine propulsors, was simulated in the Virginia Tech Linear Cascade Wind Tunnel equipped with a moving endwall system. Upstream of the blade row, idealized periodic inflow unsteadiness …
-
Near Wall Behavior of Vortical Flow around the Tip of an Axial Pump Rotor Blade
… study of three-dimensional turbulent tip gap flow in a linear cascade wind tunnel with 3.3% chord tip clearance with and without moving endwall simulation. Experimental measurements have been completed in Virginia Tech low speed linear cascade wind tunnel. A 24" access laser-Doppler …
-
The Effects of Free Stream Turbulence on the Flow Field through a Compressor Cascade
The flow through a compressor cascade with tip leakage has been studied experimentally. The cascade of GE rotor B section blades had an inlet angle of 65.1º, a stagger angle of 56.9º, and a solidity of 1.08. The final turning angle of the cascade was 11.8º. This compressor configuration was …
-
Flowfield Downstream of a Compressor Cascade with Tip Leakage
… blade, 7 passage linear compressor cascade with tip leakage was built. The flowfield downstream of the cascade was measured using four sensor hot-wire anemometers, from which the mean velocity field , the turbulence stress field and velocity spectra were obtained. Oil flow visualizations were …
-
Measurements of the Tip-gap Turbulent Flow Structure in a Low-speed Compressor Cascade
… presents results from a thorough study of the tip-gap turbulent flow structure in a low-speed linear compressor cascade wind tunnel at Virginia Tech that includes a moving belt system to simulate the relative motion between the tip and the casing. The endwall pressure measurements and the …
-
An Experimental Investigation of Unsteady Surface Pressure on Single and Multiple Airfoils
… between the blades inviscid response and tip leakage vortex strength. Measurements of fluctuating surface pressure were made on a NACA 0015 airfoil immersed in grid generated turbulence. The airfoil model has a 2' chord and spans the 6' Virginia Tech Stability Wind Tunnel test section. Two …
-
Reynolds-Averaged Navier-Stokes Computation of Tip Clearance Flow in a Compressor Cascade Using an Unstructured Grid
… code has been also developed and applied to the tip clearance flow in a highly staggered cascade. Surface grids are first generated in the flow passage and blade tip by using several triangulation methods including Delaunay triangulation, advancing front method and advancing layer method. Then …
-
Unsteady Turbulence Interaction in a Tip Leakage Flow Downstream of a Simulated Axial Compressor Rotor
The unsteady behavior of a tip leakage flow downstream of a simulated axial compressor rotor has been studied. The Virginia Tech low speed linear cascade wind tunnel was adapted to model the unsteady tip leakage flow produced by a rotor operating in the vortical wakes of a set of stator vanes. The …
-
Some Features of Tip Gap Flow Fields of a Linear Compressor Cascade
… study of three-dimensional turbulent tip gap flows in the linear cascade wind tunnel, for two different tip gap clearances (t/c=1.65% and 3.3%). The experiments focus on near-wall flow field measurements for the stationary wall and moving wall, and static pressure measurement on the …
-
A MANUFACTURING PROCESS TO IMPLEMENT TRANSONIC COMPRESSOR ENDWALL CASING TREATMENTS
… formation of harmful flow features such as the tip leakage vortex. The specific geometries of the treatments are based on empirical and experimental data previously collected in other studies. Implementing treatments was done by casting the desired geometry into a layer of epoxy on the endwall …
-
Hydrodynamic Design of Highly Loaded Torque-neutral Ducted Propulsor for Autonomous Underwater Vehicles
… of ducted propellers such as forces and moments, tip leakage vortex, leading-edge flow separation, and counter-rotating vortices formed at the duct trailing edge. The effect of variation of thickness for stator blades and different approaches for modeling the postswirl stator is presented. The …
-
Measurements of Cooling Effectiveness Along the Tip of a Turbine Blade
… and pressure side injection on a turbine blade tip. Holes on the tip called dirt purge holes expel dirt from the blade, so other holes are not clogged. Wind tunnel tests are used to observe how effectively dirt purge and microcircuit designs cool the tip. Tip gap size and blowing ratio are …
-
Numerical modeling of flow around ducted propellers
An iterative method, coupling a vortex lattice method (VLM) based potential solver and a finite volume method (FVM) based Euler solver, is used to model the flow around ducted propellers. The VLM is applied to the blade inside the duct, solves for the potential flow in the vicinity of the blade and …
-
COMMON FEATURES IN THE STRUCTURE OF TIP LEAKAGE FLOWS
… common features in the flow structure within the tip region of turbomachines. However, neither detailed measurements nor accurate simulations of tip leakage flows are currently available to enable a meaningful comparison between significantly different turbomachines. Using a combination of …
-
EFFECTS OF TIP GAP SIZES AND OPERATING CONDITIONS ON THE FLOW STRUCTURES AND THE COMPLEX TURBULENCE IN THE TIP REGION OF AN AXIAL COMPRESSOR ROTOR
The flow and turbulence in the tip region of an axial compressor rotor are studied experimentally in an optical refractive index-matched facility. Flow visualization and stereo-PIV measurements are performed with two different tip gap sizes at two flow rates. Increasing the tip clearance causes a …
-
Physics based modeling of axial compressor stall
… onset of stall. It is found that the rotor blade tip leakage vortex and its interaction with the shock wave is mainly the reason behind the stall inception in this compressor stage.
Page 1 of 2