Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 5 of 5 for “"titanium machining"”.

  1. A study of the cutting forces and vibration characteristics in titanium machining

    An investigation of titanium machining is presented in terms of cutting mechanics and dynamics. An experimental study examines the effects of the cutting parameters on the machining process of titanium alloy Ti6Al4V, as well as chatter vibration. The chip formation in near-orthogonal cutting …

    unsw Repository record for A study of the cutting forces and vibration characteristics in titanium machining (opens in a new tab)

  2. A study on the fluid film of an atomization-based cutting fluid (ACF) spray system during titanium machining

    … and low elongation–to–break ratio of titanium lead to the development of extreme temperatures localized in the tool–chip interface during machining of its alloys and cause accelerated tool wear. The atomization–based cutting fluid (ACF) spray system has recently been demonstrated to …

    uiuc Repository record for A study on the fluid film of an atomization-based cutting fluid (ACF) spray system during titanium machining (opens in a new tab)

  3. Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system

    Titanium alloys are difficult to machine materials due to their poor thermal conductivity, high affinity to tool materials at cutting temperatures and production of thin chips during machining. Heat generated in the tool-chip contact region is not readily dissipated, leading to a shortened tool …

    uiuc Repository record for Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system (opens in a new tab)

  4. Starved Lubrication using Ionic Liquid as an Additive to Biodegradable Oil in Titanium-Ceramic Contact

    … like piston-ring and cylinder liner contact, and machining etc. It can cause equipment damage leading to unexpected downtime. Ionic liquids, in the recent years have shown a great potential in terms of friction and wear reduction. Using ionic liquids as additives helps reduce the cost of the …

    rit Repository record for Starved Lubrication using Ionic Liquid as an Additive to Biodegradable Oil in Titanium-Ceramic Contact (opens in a new tab)

  5. Prediction of the Wear & Evolution of Cutting Tools in a Carbide / Ti-6Al-4V Machining Tribosystem by Volumetric Tool Wear Characterization & Modeling

    … of tool wear in the tungsten carbide / Ti-6Al-4V machining tribosystem, and to develop a new topology characterization method for worn cutting tools in order to validate the model predictions. This is accomplished by blending first principle wear mechanism models using a weighting scheme derived …

    clemson Repository record for Prediction of the Wear & Evolution of Cutting Tools in a Carbide / Ti-6Al-4V Machining Tribosystem by Volumetric Tool Wear Characterization & Modeling (opens in a new tab)