Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 114 for “"tool geometry"”.

  1. Generalized modelling of flexible machining system with arbitrary tool geometry

    … cycle times while avoiding damage on the part, tool and machine. Past research has focused on developing dedicated mathematical models for each machining operation and tool type. However, the tool geometry and configuration of the machining set-up varies widely depending on the part geometry and …

    ubc Repository record for Generalized modelling of flexible machining system with arbitrary tool geometry (opens in a new tab) Download PDF for Generalized modelling of flexible machining system with arbitrary tool geometry (opens in a new tab)

  2. The influence of tool geometry on the performance of drilling tools

    … grinder is based on a computer aided drill point geometry analysis. In addition to the conical grinding concept, the new grinder is also used to produce spherical point utilizing a computer aided drill point geometry analysis.

    aston Download PDF for The influence of tool geometry on the performance of drilling tools (opens in a new tab)

  3. Helical tool geometry in stability predictions and dynamic modeling of milling

    … time. Also, in order to highlight the effect tool geometry has on stability and surface location error in milling, TFEA results that do and do not ignore helical geometry will be compared. In addition, simulation and experimental data are presented in an effort to validate TFEA results for …

    missouri Repository record for Helical tool geometry in stability predictions and dynamic modeling of milling (opens in a new tab)

  4. Investigation of the effect of tool geometry on the machining process

    Cutting tool geometries play important roles in tool performance, such as tool life, surface integrity, and cutting force. The most common commercial tools edge geometries are honed, chamfered and hone-chamfered. This study investigates new ways to develop tool geometry. An uncoated carbide tool is …

    mcmaster Repository record for Investigation of the effect of tool geometry on the machining process (opens in a new tab)

  5. Mechanistic Cutting Force Modeling and Surface Finish in UD-CFRP Milling: Effects of Material Removal Modes

    … to investigate how material removal behavior and tool geometry affect force prediction and machined surface quality. Toray T800S-24K UD carbon fiber prepreg with an epoxy matrix system is used for this study, and mechanistic force modeling is evaluated using both standard and serrated tools. Fiber …

    utk-theses Repository record for Mechanistic Cutting Force Modeling and Surface Finish in UD-CFRP Milling: Effects of Material Removal Modes (opens in a new tab)

  6. Generalized modeling of metal cutting mechanics

    … cutting process which is applicable to various tool geometries and cutting processes in order to simulate machining of industrial parts in virtual environment. This thesis presents a generalized mathematical model which can be used to predict turning, drilling, boring and milling processes. The …

    ubc Repository record for Generalized modeling of metal cutting mechanics (opens in a new tab) Download PDF for Generalized modeling of metal cutting mechanics (opens in a new tab)

  7. Punching aluminum sheet with rubber press pads

    … by high pressures in conjunction with suitable tooling. This phenomenon has been incorporated into a production technique known as the Guerin process. It is advantageous in that the manufacturing of the closely mating conventional steel punch and dies can be eliminated, resulting in exceptional …

    sask Repository record for Punching aluminum sheet with rubber press pads (opens in a new tab)

  8. Fundamentals of friction stir spot welding

    … influence of process inputs (weld parameters and tool geometry) on the process output (weld geometry and static strength) is studied. A Design of Experiments (DoE) is carried out to identify the effect of each process parameter on weld strength. It is found that the tool geometry, and in …

    must-thes Repository record for Fundamentals of friction stir spot welding (opens in a new tab)

  9. Modeling of mechanics and dynamics of boring

    … prediction of cutting forces as a function of tool geometry, work material properties, and cutting conditions such as feed rate, radial depth of cut, and cutting speed. The dynamics of the process involve the modeling of interactions between the structural dynamics of a long, slender boring …

    ubc Repository record for Modeling of mechanics and dynamics of boring (opens in a new tab) Download PDF for Modeling of mechanics and dynamics of boring (opens in a new tab)

  10. Cutting Mechanisms in Micro-Endmilling and Their Influence on Surface Generation

    … models are used to study the effects of tool geometry, process conditions, spindle runout, process kinematics and dynamics on the machined surface roughness. One of the most important findings is that a feedrate of 1-1.5 times of the minimum chip thickness is a good starting point for …

    uiuc Repository record for Cutting Mechanisms in Micro-Endmilling and Their Influence on Surface Generation (opens in a new tab)

  11. Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters

    … can express the cutting process parameters and tool geometry parameters as functions of machined residual stress profile to allow process planning in achieving desired residual stress profile. This research seeks to fill that void by developing a novel approach to enable the extraction of …

    gatech Repository record for Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters (opens in a new tab)

  12. The Nitriding Of High Speed Steel Cutting Tools

    … is an interest in industry in cost reduction. Tool wear constitutes an important element in the cost of many metalworking processes, not only because of the cost of the tool, but also because of the cost of machine downtime. Saltbath nitriding of high speed steel tools adds only about 1%to the …

    plymouth Repository record for The Nitriding Of High Speed Steel Cutting Tools (opens in a new tab)

  13. Effects of Processing Parameters on Friction Stir Welded Lap Joints of AA7075-T6 and AA6022-T4

    … and AA6022-T4 when the welding parameters of tool geometry and welding speed are varied. The resulting joints are characterized by optical microscopy, overlap shear tests, microhardness tests, and temperature measurements. The effect of a post-weld heat treatment is also examined. The main …

    waterloo Repository record for Effects of Processing Parameters on Friction Stir Welded Lap Joints of AA7075-T6 and AA6022-T4 (opens in a new tab)

  14. A new tooling system with the function of on-line adjustable tool inclination angle in turning operations

    Tool geometry, especially rake and inclination angles, has significant effects on machining performance, including cutting forces, chip formation, tool life, tool wear, etc. This thesis describes details of designing a new tooling mechanism with on-line adjustable cutting edge inclination angle. …

    iastate Repository record for A new tooling system with the function of on-line adjustable tool inclination angle in turning operations (opens in a new tab)

  15. A model to predict the three-dimensional cutting force system for drilling with arbitrary point geometry

    … the cutting forces in drilling, in terms of the tool geometry and machining conditions, is an important step in developing a simulation-based platform for the design and evaluation of new drill point geometry to improve quality and productivity.

    uiuc Repository record for A model to predict the three-dimensional cutting force system for drilling with arbitrary point geometry (opens in a new tab)

  16. Titanium milling strategies.

    … the key process limitations of chatter and tool wear. These subjects are typically studied in isolation and little work has previously been undertaken on titanium milling dynamics. Titanium is often perceived as difficult to machine as the very properties such as high strength at high …

    whiterose Download PDF for Titanium milling strategies. (opens in a new tab)

Page 1 of 6