Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 92 for “"top electrode"”.
-
Development of Intrinsically Stretchable Vertical Organic Electrochemical Transistors Via Interfacial Top Electrode Modification
… scale channel lengths. To address the failure of electrodes under mechanical strain, a top electrode engineering strategy is introduced using a trilayer top electrode mechanism. This significantly enhances interfacial adhesion and charge transport. The resulting svOECTs exhibit electromechanical …
-
Treated HfO2 based rram devices with ru, tan, tin as top electrode for in-memory computing hardware
… addition to oxygen vacancy rich HfO_2, various top metal electrodes including Ruthenium (Ru) are explored to enhance the switching behavior and power consumption. Use of Ru as a top metal reduced the switching energy of the treated HfO_2 RRAM device.
-
The Investigation of Inorganic Co Based ReRAM Devices and Organic Cu Doped PANI-CSA Top Electrode Based ReRAM Devices
… However, since platinum (Pt) acting as the inert electrode is not economical efficient for industrial production, a compatible replacement of Pt is highly desirable. The device property of Co based resistive switching devices has been explored in this work. Compared with Pt devices, electric …
-
Capacitive shear stress sensor with DC sensing capability for fluid flow measurements
… unit sensing cells, each of which contains three electrodes: two resting on the substrate, and a third resting on top of the dielectric, between the bottom electrodes. This configuration creates a resting capacitance between the top electrode and either bottom electrode that varies when the top …
-
Resistance switching of electrodeposited cuprous oxide
… this work, the resistance switching behavior of electrodeposited cuprous oxide (Cu2O) thin films in Au/Cu2O/top electrode (Pt, Au-Pd, Al) cells was studied. After an initial FORMING process, the fabricated cells show reversible switching between a low resistance state (16.6 Ω) and a high …
-
Current-voltage characteristics of organic semiconductors: interfacial control between organic layers and electrodes
… processable materials embedded between two electrodes were studied to find materials possessing high charge-carrier mobilities and to design organic memory devices. The comparison studies between TOF, FET and SCLC measurements confirm the validity of using analyses of I-V characteristics to …
-
Interface driven engineering of charge transport across molecular tunneling junctions
… junction with Eutectic Gallium Indium as top electrode and metal thin film as bottom electrode.</p> <p>The role of interfaces in the junctions has been evaluated. The morphology of both bottom electrode and top electrode affects the charge transport behavior (in these system, it is quantum …
-
Epitaxial aluminum scandium nitride on molybdenum electrodes for bulk acoustic wave resonators
… physical, and acoustic properties of the electrode material are vital for BAW resonator performance. Among possible options, molybdenum (Mo) emerged as the preferred electrode.<br><br>This study focuses on assessing resonator performance by employing a high overtone bulk acoustic wave …
-
Ferroelectric Memristors - Materials, Interfaces and Applications
… optimization of the annealing treatment and top electrode texturing, the fabricationof vertical InAs nanowire FeFETs is successfully implemented. The FeFET shows encouraging initial results with limitationssolvable by further process engineering.The fabrication of metal-insulator-metal (MIM) …
-
Impact of thermal material properties and local ion concentration on Ti/HfOx-based analog devices
… establishes the impact of the substrate and electrode thermal conductivity both experimentally and computationally. For biologically realistic pulse widths, low substrate thermal conductivities led to increased resistance changes in RRAM devices. Furthermore, scanning thermal microscopy was …
-
Electron Emission from Ferroelectric Thin Films and Single Crystals
… thin films were prepared with a structured top electrode, with nanometer-sized regularly arranged apertures. The emission from lead zirconate titanate (PZT) thin films was achieved at excitation voltages as low as 10 V. The voltage dependent polarization state within the emission apertures …
-
CHARGE TRANSPORT IN CONJUGATED MOLECULAR JUNCTIONS
… a eutectic gallium-indium (EGaIn) alloy as the top electrode to fabricate junctions and investigate their electronic properties. The effect of molecular structure, anchoring group, and the bottom electrode, are explored. The results show that Marcus Inverted Region (MIR) transport can be …
-
Magnetic properties of Co-Ta thin films and their applications in magnetic tunnel junctions
… Devices were also fabricated using Co-Ta as the top electrode. The magnetoresistive ratios of the latter were lower than when Co was used. This was attributed to the presence of the non-magnetic Ta, which reduced the spin polarizations of Co.
-
Mechanisms and fabrications of high efficiency organic-inorganic hybrid perovskite solar cells
… low temperature lamination technique for the top electrode. 4) Elucidating the origin of photocurrent hysteresis and eliminating it by passivating the surface trap of perovskites. 5) Understanding the impact of ion migration in perovskite optoelectronics including photovoltaics and synaptic …
-
Mode Engineering and Functional Enhancement in Piezoelectric-on-Silicon MEMS Resonators with Magnetic Field Sensing Applications
… novel post-fabrication tuning techniques, electrode configuration effects, and innovative sensor applications for thin-film piezoelectric-on-silicon (TPoS) resonator devices. Driven by the increasing demand for tunable, high-precision and robust MEMS resonators in radio frequency (RF) …
-
Impedance Biochips for Disturbing–Free Cell Counting
… of p-n junction-based Si biochips with gold ring top electrodes and unstructured gold bottom electrodes, which allows for counting target biomaterial in a liquid-filled ring top electrode region. The phosphor and boron implanted biochips prepared in dissimilar annealing and doping conditions have …
-
Three dimensional conductivity modulation in biocompatibly functionalized nano-engineered structures
… surface. An approach to the fabrication of the top electrode has been suggested. A theoretical model is developed to explain the conductivity modulation.
-
Design and Fabrication of Electrostatically Actuated and Inkjet Printed Micro-Electro-Mechanical-System (MEMS) Switch
… consists of an anchor, the cantilever beam, top electrode and bottom transmission lines. During the fabrication process, different printed layers are characterized with respect to terminal resistances, sheet resistances of the materials, critical thickness of each layer, conductivity etc. …
-
CHARGE TRANSPORT IN MOLECULAR TUNNEL JUNCTIONS IN THE WEAK COUPLING REGIME
… junctions that operate in the strong molecule-electrode coupling regime and thus, this Thesis examines biomolecular charge transport in the weak molecule-electrode coupling regime. We aim to understand why charge transport across biomolecules is highly efficient and investigate the role of the …
Page 1 of 5