Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"torque distribution"”.

  1. INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL

    … dynamics control is the use of appropriate drive torque distribution to the wheels of the vehicle. This thesis focuses on particular torque distribution management systems suitable for vehicles with independently driven wheels. In conducting this study, a non-linear seven degree-of-freedom vehicle …

    clemson Repository record for INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL (opens in a new tab)

  2. Analysis of Dual-Motor Drivetrain Architectures with Torque Distribution - Energy Consumption Evaluation for Electric Articulated Haulers

    … the research highlight that the effectiveness of torque distribution is closely tied to two key factors: operating condition and the drivetrain configuration. Among the investigated configurations, the partially coupled architecture consistently achieves lower energy consumption across all …

    chalmers Repository record for Analysis of Dual-Motor Drivetrain Architectures with Torque Distribution - Energy Consumption Evaluation for Electric Articulated Haulers (opens in a new tab)

  3. A Redundantly Actuated Masticatory Robot of Spatial Parallel Mechanism with Two Higher Kinematic Pairs —Kinematics, Optimal Torque Distribution and Motion Control

    … Newton-Euler equations, acquiring the actuating torques, the reaction forces in the linkages and at HKPs. Five optimal criteria were proposed to distribute the actuating torques based on the applications of the robot. Stiffness and natural frequency were computed for a safe operation of the …

    auckland-ms Repository record for A Redundantly Actuated Masticatory Robot of Spatial Parallel Mechanism with Two Higher Kinematic Pairs —Kinematics, Optimal Torque Distribution and Motion Control (opens in a new tab)

  4. Active driveline and suspension control to improve vehicle handling

    … focuses on the integration of roll moment distribution control and variable torque distribution control to improve vehicle handling and dynamics. A survey of the literature determines the current state of the art and directs the research toward undeveloped areas. The work is carried out …

    whiterose Download PDF for Active driveline and suspension control to improve vehicle handling (opens in a new tab)

  5. Vehicle Dynamic and Control of Constrained Multi-Actuation Systems at the Limits of Handling

    … wheel independently in real-time. Independent torque distribution enables developing optimal torque distribution systems for various objective functions. A good example of the benefits of an independent torque distribution strategy is the ability to maximize the vehicle's lateral grip. When a …

    waterloo Repository record for Vehicle Dynamic and Control of Constrained Multi-Actuation Systems at the Limits of Handling (opens in a new tab)

  6. Σχεδιασμός, ανάλυση και πειραματική διερεύνηση διαφορικού οχημάτων με καθοριζόμενη κατανομή ροπής

    The theme discussed in the present work is the torque distribution to the driving wheels of a vehicle which is utilized by the use of a mechanism called differential. The aim of this project is to give a solution to the problem of torque distribution in order to affect the vehicle’s driving …

    greece Repository record for Σχεδιασμός, ανάλυση και πειραματική διερεύνηση διαφορικού οχημάτων με καθοριζόμενη κατανομή ροπής (opens in a new tab)

  7. Torque Architecture For The Propulsion Supervisory Controller Of An Independent Axle All-Wheel Drive Electric Vehicle

    … power moding, transmission range selection and torque architecture are discussed. For the torque architecture, different torque distribution strategies are explored in detail. Initially, a comparison of torque distribution strategies considering positive torques only, is used to assess the …

    vt Repository record for Torque Architecture For The Propulsion Supervisory Controller Of An Independent Axle All-Wheel Drive Electric Vehicle (opens in a new tab)

  8. Torque control strategy for off-road vehicle mobility.

    … power by the engine but also on the power distribution among the drive axles/wheels. In turn, this distribution is primarily regulated by the drivetrain layout and the torque distribution devices. At the output of the drivetrain system, the torque is constrained by the interaction between …

    uoit Repository record for Torque control strategy for off-road vehicle mobility. (opens in a new tab)

  9. Prediction of mobility, handling, and tractive efficiency of wheeled off-road vehicles

    … features, such as the drawbar pull, the driving torque and the lateral force, as well as complex behaviors, such as the slip-sinkage phenomenon and the multi-pass effect. The tractive efficiency of different tire-soil configurations is simulated and discussed. To investigate the handling and the …

    vt Repository record for Prediction of mobility, handling, and tractive efficiency of wheeled off-road vehicles (opens in a new tab)

  10. Intelligent energy management agent for a parallel hybrid vehicle

    … This information is subsequently used by the torque distribution and charge sustenance components of IEMA to determine the power split strategy, which is shown to lead to improved fuel economy and reduced emissions.

    tamu Repository record for Intelligent energy management agent for a parallel hybrid vehicle (opens in a new tab)

  11. Comparison of the force and torque transfer for different cam profiles

    This study presents static load and torque distribution measurements in groove cams for sinusoidal and cycloidal cam profiles. In this thesis, two different designs and apparatuses were developed and built for the static force and torque measurements in cam-follower systems. It was shown that for …

    uoit Repository record for Comparison of the force and torque transfer for different cam profiles (opens in a new tab)

  12. Optimization of Thruster Configuration for Swimming Robots

    … are shown to be useful in imposing a force and torque distribution. At first a detailed thruster configuration modeling method is presented. Then, the indices of measure are defined and used to evaluate and analyze a set of thruster configurations. Finally a parametric optimization is performed.

    rice Repository record for Optimization of Thruster Configuration for Swimming Robots (opens in a new tab)

  13. Development of a Torque Split and Clutch Algorithm for a Dual Motor All-Wheel Drive Electric Vehicle

    … to provide propulsive and regenerative braking torque. The Georgia Tech EcoCAR team modified a 2023 Cadillac LYRIQ, adding two drive units manufactured by Magna Powertrain. The rear drive unit incorporates a clutch that allows it to disconnect from the rear axle. A driver's accelerator pedal …

    gatech Repository record for Development of a Torque Split and Clutch Algorithm for a Dual Motor All-Wheel Drive Electric Vehicle (opens in a new tab)

  14. BENCHMARKING MODEL PREDICTIVE CONTROL AND REINFORCEMENT LEARNING FOR LEGGED ROBOT LOCOMOTION

    … external forces, albeit relying heavily on torque in a single joint, while MPC provides a balanced torque distribution across all joints. In stumbling scenarios, MPC outperforms RL in recovery time, although both controllers face challenges when the robot falls into a failure state. …

    mtu Repository record for BENCHMARKING MODEL PREDICTIVE CONTROL AND REINFORCEMENT LEARNING FOR LEGGED ROBOT LOCOMOTION (opens in a new tab)

  15. Development of a small-scale electric vehicle for evaluation of torque vectoring and MPC path tracking

    … rear wheels is developed to implement and test torque vectoring and MPC using microcontrollers. The project investigated how torque distribution affects stability, maneuverability and trajectory tracking during representative driving maneuvers. A scale RC car chassis was purchased and equipped …

    chalmers Repository record for Development of a small-scale electric vehicle for evaluation of torque vectoring and MPC path tracking (opens in a new tab)

  16. Modelling of a rear axle Torque Vectoring Dual Clutch driveline for battery electric vehicles with verification in a virtual environment

    … model of one such concept namely, a rear axle Torque Vectoring Dual Clutch (TVDC) system for a battery electric vehicle. The TVDC model is also integrated with the complete vehicle model to conduct complete vehicle verification in a simulation environment. The objective is to model the system …

    chalmers Repository record for Modelling of a rear axle Torque Vectoring Dual Clutch driveline for battery electric vehicles with verification in a virtual environment (opens in a new tab)

  17. Propulsion development model for MiL/HiL/DiL purposes

    … vehicle drivetrains. Key features such as torque vectoring, slip control, and torque distribution are incorporated, making the model compatible with di- verse powertrain configurations, including rear-wheel drive (RWD) and all-wheel drive (AWD). Integration with CarMaker allows for …

    chalmers Repository record for Propulsion development model for MiL/HiL/DiL purposes (opens in a new tab)

  18. Evaluation of torque-induced spatial error in the stereotactic definition of the Leksell Gamma Knife ICON system

    … the frame pins are subject to various levels of torque or asymmetrically applied torque. This torque on the frame pins can translate to a further torque about the frame’s base, warping the stereotactic coordinate system away from the orthogonal coordinate system that is assumed by the treatment …

    gatech Repository record for Evaluation of torque-induced spatial error in the stereotactic definition of the Leksell Gamma Knife ICON system (opens in a new tab)

Page 1 of 2