Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"torsional testing"”.
-
Torsional Testing of Race, K3 and Profile Nickel Titanium Endodontic Files
… designs that may effect their resistance to torsional stress. The purpose of this study is to evaluate the static torsional properties of two nickel titanium files that have recently been introduced for use in endodontics and compare them to the same size Profile instruments. Ten new files of …
-
Three-dimensional static and dynamic behavior of kaolin clay with controlled microfabric using combined axial-torsional testing
<p>A combined axial-torsional testing system was developed to investigate the effect of principal stress rotation and microfabric on the three-dimensional mechanical behavior of Kaolin clay. Uniform and reproducible specimens having a shape of a hollow cylinder were obtained using a slurry …
-
Biomechanical comparison of the 1.5mm locking compression plate with the 1.5 and 2.0mm mini-cuttable plates & Effect of bone-plate distance on the biomechanical properties of the 1.5mm locking plate
… breeds while a biomechanical study compares the torsional and compression properties of the 1.5mm LCP to the 1.5mm mini-cuttable plate, 1.5mm mini-cuttable plate stacked and 2.0mm mini-cuttable plate. This thesis also documents effects of bone-plate distance on the biomechanical properties of the …
-
An investigation of the stiffness of shafts with integral disks
… of the effect of an integral disk on the torsional elastic stiffness of an axisymmetric shaft are presented. Various configurations of disk diameters and widths on a shaft of specified diameter were investigated, using a finite element method of calculation verified by experimentation. The …
-
Mechanical Properties and MEMS Applications of Carbon-Infiltrated Carbon Nanotube Forests
… 80% more flexible than single-crystal silicon. A torsional testing procedure provided an initial shear modulus of about 5 GPa for the 7-nm, 30-min CI-CNT. The strain and elastic modulus values were used to design numerous functional devices which were then fabricated in CI-CNT. A series of …
-
Analysis of Pneumatic Artificial Muscles in Anchoring, Torsion, and Weight-Limited Robotic Applications
… novel actuation methods: radial expansion and torsional response. In addition, PAMs utilizing novel material for light weight scenarios are studied and applied to a sweeping wing mechanism in an unmanned aerial system (UAS). For the radial expansion model, modeling was performed using a force …
-
Evaluation of stress state on the mechanical properties of 3D printed metallic lattice structures fabricated via laser powder bed fusion for orthopedic applications
… compressive, compressive shear, and torsion testing was conducted to determine the mechanical behavior. The findings showed that sample geometry and test setup significantly impacted the mechanical properties of metallic lattice structures, which led to the design of a universal sample …
-
Effects of genetic variability on fracture healing: a temporal study of gene expression and callus phenotype
… micro-computed tomography (μCT), biomechanical torsional testing, and cartilage contrast-enhanced micro-computed tomography (CECT). The temporal analysis of gene expression revealed that B6 had the longest duration of chondrocyte maturation and the greatest relative expression of osteogenic …
-
Interface Behavior of Water Saturated Limestone Rock Joints Using Hollow Cylinder Testing and A Case History Regarding Mine Roof Stability: Fort Hartford Mine Superfund Site
… performed with a hollow cylinder combined axial-torsional testing apparatus to study the effects of confining fluid pressure on the shear strength of artificial rock joints for Holston Limestone. Tests were performed for confining fluid pressures of 0.14 MPa to 0.55 MPa and effective joint normal …
-
Experimental verification of finite element analysis for deep denting of cylindrical shells
… thick, 36 inch long pipes using an MTS axial torsional testing equipment and Tinius Olsen universal testing machine. Strain gages were installed at selected locations on the pipes in each experiment. In some cases, preliminary finite element analysis was performed prior to the experimental …
-
Relative Orthodontic Bracket Bond Strength Measured in Three Testing Modalities
… strength measurement results obtained with three testing modalities (tension, shear-peel and torque). Simply stated, we have examined the following question: If a manufacturer, using tensile debonding loads, claims that product Y is twice as strong as product X, will the same results be obtained …
-
The effects of genetic variation on endochondral bone formation in fracture healing of rachitic mice
… enhanced micro- computed tomography (CECT). Torsional mechanical testing was used to measure bone strength. To assess if replenishing phosphate could rescue mineralization and biomechanical properties of deficient healing, normal phosphate was re-introduced after 15 days of deficiency and …
-
Next-generation equipment and procedures for combined resonant column and torsional shear testing
… and procedures for combined resonant column and torsional shear (RCTS) testing are detailed. The work in this dissertation covers three key areas of RCTS testing that need improvement to reach the next level of RCTS testing. The first area involved improvement in measurement resolution with …