Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"trailing edge blowing"”.

  1. Trailing-Edge Blowing of Model Fan Blades for Wake Management

    … to implement the wake management technique of trailing-edge blowing were tested in a linear cascade configuration. Measurements were made on two sets of blowing blades installed in the Virginia Tech low-speed linear cascade wind tunnel. The simple blowing blades were identical to the baseline …

    vt Repository record for Trailing-Edge Blowing of Model Fan Blades for Wake Management (opens in a new tab)

  2. Reduction of Unsteady Rotor-Stator Interaction Using Trailing Edge Blowing

    … to assess the effects of adding mass flow at the trailing edges of four stators upstream of an aircraft engine simulator. By using trailing edge blowing to minimize the shed wakes of the stators, the flow into the rotor was made more uniform. In these experiments a reduced number of stators (four) …

    vt Repository record for Reduction of Unsteady Rotor-Stator Interaction Using Trailing Edge Blowing (opens in a new tab)

  3. Advanced Trailing Edge Blowing Concepts for Fan Noise Control: Experimental Validation

    This thesis documents trailing edge blowing research performed to reduce rotor / stator interaction noise in turbofan engines. The existing technique of filling every velocity deficit requires a large amount of air and is therefore impractical. The purpose of this research is to investigate new …

    vt Repository record for Advanced Trailing Edge Blowing Concepts for Fan Noise Control: Experimental Validation (opens in a new tab)

  4. Noise Reduction in an Axisymmetric Supersonic Aircraft Inlet using Trailing Edge Blowing

    … of a supersonic aircraft engine inlet using Trailing Edge Blowing (TEB) to reduce the engine fan noise from a turbofan propulsion simulator (TPS). The TPS is 4.1 in. (10.4 cm) in diameter and is powered by compressed air. The supersonic inlet is connected to the TPS and is geometrically and …

    vt Repository record for Noise Reduction in an Axisymmetric Supersonic Aircraft Inlet using Trailing Edge Blowing (opens in a new tab)

  5. Reduction of Unsteady Stator-Rotor Interaction by Trailing Edge Blowing Using MEMS Based Microvalves

    This research performs an experimental study of a trailing edge blowing system that can adapt to variations in flow parameters and reduce the unsteady stator-rotor interaction at all engine operating conditions. The fan rotor of a 1/14 scale turbofan propulsion simulator is subjected to spatially …

    vt Repository record for Reduction of Unsteady Stator-Rotor Interaction by Trailing Edge Blowing Using MEMS Based Microvalves (opens in a new tab)

  6. Active Flow Control For Reduction of Unsteady Stator-Rotor Interaction In a Turbofan Simulator

    … this dissertation consists of employing active trailing edge blowing control to reduce the unsteady stator-rotor interaction in a turbofan simulator. Two active flow control systems with different wake sensing approaches are successfully implemented on the engine simulator. The first flow …

    vt Repository record for Active Flow Control For Reduction of Unsteady Stator-Rotor Interaction In a Turbofan Simulator (opens in a new tab)

  7. Aerodynamic Performance of a Flow Controlled Compressor Stator Using an Imbedded Ejector Pump

    … and tested. Both boundary layer suction and trailing edge blowing developed from a single supplied motive pressure source are employed on the stator. Massflow removed through boundary layer suction is added to the motive massflow, and the resulting combined flow is used for trailing edge …

    vt Repository record for Aerodynamic Performance of a Flow Controlled Compressor Stator Using an Imbedded Ejector Pump (opens in a new tab)

  8. An Experimental Investigation of the STOL Performance of Cal Poly's AMELIA in the NFAC

    … (CESTOL) model incorporating leading- and trailing-edge blowing wing circulation control and over-the-wing mounted turbine propulsion simulators (TPS) to date. Testing of the 10 foot span model proved successful and was the result of a 5 year NASA Fundamental Aeronautics Program Research …

    calpoly Repository record for An Experimental Investigation of the STOL Performance of Cal Poly's AMELIA in the NFAC (opens in a new tab)

  9. Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane

    … of combined boundary layer suction and trailing edge blowing at reducing the blade profile losses and the wake momentum deficit of a cascade of tandem IGV's operating at realistic flow conditions. Two trailing edge blowing designs were tested: metal-angle blowing, which oriented the …

    vt Repository record for Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane (opens in a new tab)

  10. Modifications of Coherent Structures in Fan Blade Wakes for Broadband Noise Reduction

    The effects of trailing edge flow control on the wakes of a linear cascade of idealized fan blades was investigated experiments with a view to the likely effects on broadband aircraft engine interaction noise. Single and three-component hotwire velocity measurements were made downstream of the …

    vt Repository record for Modifications of Coherent Structures in Fan Blade Wakes for Broadband Noise Reduction (opens in a new tab)

  11. Circulation control improvements to rotor lift asymmetry due to reverse flow

    … the azimuth angle. By alternatively activating blowing slots along the leading and trailing edges of the airfoil, the aerodynamic parameters (i.e. lift and drag) can be changed, effectively changing the angle of attack through streamline alteration thus eliminating the need for physical blade …

    wvu Repository record for Circulation control improvements to rotor lift asymmetry due to reverse flow (opens in a new tab)

  12. Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics

    … occurring in a turbofan engine is referred to as trailing edge blowing (TEB). TEB reduces the vortical, or wake, components of a fluid flow that propagate from upstream stator blades, to impinge on the surfaces of downstream rotor blades, one of the causes of HCF. The experimental results from the …

    rit Repository record for Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics (opens in a new tab)

  13. Investigation of Inlet Guide Vane Wakes in a F109 Turbofan Engine with and without Flow Control

    … transonic relative blade velocities. The sharp trailing-edge vanes were designed to produce a wake profile consistent with modern IGV. Time averaged baseline measurements were first performed with the IGV located upstream of the aerodynamic influence of the fan. Unsteady experiments were …

    vt Repository record for Investigation of Inlet Guide Vane Wakes in a F109 Turbofan Engine with and without Flow Control (opens in a new tab)

  14. Effects of Inlet Guide Vane Flow Control on Forced Response of a Transonic Fan

    … Studies have shown that flow control by trailing edge blowing (TEB) can reduce stator wake strength and the amplitude of the downstream rotor blade vibrations generated by the unsteady stator-rotor interaction. In the present study, the effectiveness of TEB to reduce forced blade …

    vt Repository record for Effects of Inlet Guide Vane Flow Control on Forced Response of a Transonic Fan (opens in a new tab)

  15. Wake Filling Techniques for Reducing Rotor-Stator Interaction Noise

    … of the project was to reduce the amount of blowing required air for wake filling and thus limit the efficiency penalty in an aircraft engine environment. Testing was performed in a linear blow down cascade wind tunnel, which produced an inlet Mach number of 0.345. The cascade consisted of …

    vt Repository record for Wake Filling Techniques for Reducing Rotor-Stator Interaction Noise (opens in a new tab)

  16. A Numerical Study on the Flapping-Wing Aerodynamics and Vortex Dynamics

    … of attack is presented. It is found that the trailing-edge blowing jet improved average lift by 50% at Re = 1000 and by 23% at Re = 5000. While the leading-edge upstream blowing jet enhances the formation of the leading edge vortex (LEV), the mid-chord vertical blowing jet increases lift …

    unsw Repository record for A Numerical Study on the Flapping-Wing Aerodynamics and Vortex Dynamics (opens in a new tab)

  17. Computational Studies of the Effects of Active and Passive Circulation Enhancement Concepts on Wind Turbine Performance

    … with circulation enhancement technology (trailing edge blowing or Gurney flaps) is investigated using a three-dimensional unsteady viscous flow analysis. The National Renewable Energy Laboratory (NREL) Phase VI horizontal axis wind turbine is chosen as the baseline configuration. Prior to …

    gatech Repository record for Computational Studies of the Effects of Active and Passive Circulation Enhancement Concepts on Wind Turbine Performance (opens in a new tab)

  18. Flow Control Optimization for Improvement of Fan Noise Reduction

    … The current configuration consisted of a trailing edge Slot with a flow control area of 0.045 in² per inch span with an exit angle of -3.3° with respect to the blade exit angle. Two other flow control configurations containing discrete jets were investigated. For the first configuration, …

    vt Repository record for Flow Control Optimization for Improvement of Fan Noise Reduction (opens in a new tab)