Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 42 for “"transformer core"”.

  1. Machine Learning Based Three-Limb Core-Type Transformer Core Aspect Ratios Identification

    Power transformers are considered one of the key elements of electric grids. Transient studies include transformer transient analysis which is required for the continuous power supply. However, to perform the transient analysis, the details of the internal structure of the transformer are required …

    gsu Repository record for Machine Learning Based Three-Limb Core-Type Transformer Core Aspect Ratios Identification (opens in a new tab)

  2. Harmonic analysis of transformer excitation currents

    Transformer core nonlinearity has been a subject of research in electrical power engineering for many decades. An accurate and simple transformer model that takes into account its iron saturation appears to be lacKing The objective of this thesis is to propose a voltage-dependent model of …

    unlv Repository record for Harmonic analysis of transformer excitation currents (opens in a new tab) Download PDF for Harmonic analysis of transformer excitation currents (opens in a new tab)

  3. Investigation of protection problems due to geomagnetically induced currents

    … cause severe offset saturation of power system transformers. Continuous saturation of transformers can result in transformer overheating, and cause harmon c currents to be injected into the system. Relay and protection systems are affected by harmonic currents passing through the system. A …

    manitoba Repository record for Investigation of protection problems due to geomagnetically induced currents (opens in a new tab)

  4. IMPACT OF INRUSH CURRENTS AND GEOMAGNETICALLY INDUCED CURRENTS ON TRANSFORMER BEHAVIOR

    Transformers are the tie-points of electrical power systems. Their protection from power system faults and other innate issues is of prime importance. A few of the issues that are studied in this report are magnetic inrush currents, geomagnetically induced currents in power transformers and …

    mtu Repository record for IMPACT OF INRUSH CURRENTS AND GEOMAGNETICALLY INDUCED CURRENTS ON TRANSFORMER BEHAVIOR (opens in a new tab)

  5. Investigation of variable transformers by finite element modelling

    … the electrical industry, exemplified in variable transformers used in voltage regulation and control. Despite the recent introduction of the solid-state devices variable transformers, which are adjustable autotransformers, are still widely used as voltage regulators in many applications. Although …

    city-london Download PDF for Investigation of variable transformers by finite element modelling (opens in a new tab)

  6. The Design and Construction of a Current Transformer

    The transformer is a piece of apparatus used to transform alternating current power, from high voltage and low current to low voltage and high current or vice versa. It consists of a magnetic circuit of laminated iron linking two separate and distinct coils of wire. Alternating current is supplied …

    marquette Repository record for The Design and Construction of a Current Transformer (opens in a new tab)

  7. Gyrator Capacitor Modeling Approach to Study the Impact of Geomagnetically Induced Current on Single-Phase Core Transformer

    … used for determining the behavior of power transformers to model the geomagnetically induced current (GIC), the gyrator-capacitor approach is proposed. This approach offers a better understanding of magnetic components compared to other methods, particularly for multi-winding devices and is …

    ut-knoxville Repository record for Gyrator Capacitor Modeling Approach to Study the Impact of Geomagnetically Induced Current on Single-Phase Core Transformer (opens in a new tab)

  8. Methods for studying ferroresonance in pi and series power circuits

    … be of any order needed to accurately match the transformer's core characteristic. Therefore, the solution obtained through the Two-slope Method can be enhanced by the utilization of Gear's Digital Program without requiring significant additional effort;For this investigation, two basic …

    iastate Repository record for Methods for studying ferroresonance in pi and series power circuits (opens in a new tab)

  9. Power transformer magnetization under GIC/GMD

    … induced currents (GIC) could saturate a transformer core. Two significant effects are the abnormal stray flux in transformers and extremely large harmonic contents in excitation currents, which can lead to serious equipment damage and power system misoperation. Such incidents have …

    vt Repository record for Power transformer magnetization under GIC/GMD (opens in a new tab)

  10. Oxidation and crystallisation of amorphous alloys

    … Fe-based soft ferromagnetic amorphous alloys as transformer core materials can cut the transformer core losses to about 1/4, with considerable energy saving. However, during manufacture, heat treatment and in service, amorphous alloys may need to be exposed to moderately high temperatures for a …

    oxford Repository record for Oxidation and crystallisation of amorphous alloys (opens in a new tab)

  11. Study of the Harmonic Effects Due to Transformer Magnetic Nonlinearities in Controlled Rectifiers Feeding Adjustable Speed DC Motor Drives

    … harmonic effects arising from non-linearity in transformer winding inductances when such transformers are connected to controlled rectifier systems feeding adjustable speed dc motor drives or other dc loads are presented in this thesis work. These harmonic effects are studied primarily on the …

    marquette Repository record for Study of the Harmonic Effects Due to Transformer Magnetic Nonlinearities in Controlled Rectifiers Feeding Adjustable Speed DC Motor Drives (opens in a new tab)

  12. Active Transformer Flux Balancing for a PSFB-DAB Converter

    … of active flux balancing on a planar transformer within a PSFB-DAB converter system. This is used to mitigate magnetizing flux and prevent transformer core saturation. The approach starts with the creation of a state-space model of the transformer, followed by the development of two …

    chalmers Repository record for Active Transformer Flux Balancing for a PSFB-DAB Converter (opens in a new tab)

  13. High Performance Sensorless Controlled PMSM Drive with Long Cable for Subsea Applications

    … by the inclusion of a sinewave filter, transformer, and long cable experience several control challenges. The voltage drops are a common issue across these components, while the passive elements of the sinewave filter specifically introduce magnitude & phase shifts, and the transformer …

    houston Repository record for High Performance Sensorless Controlled PMSM Drive with Long Cable for Subsea Applications (opens in a new tab)

  14. High-Frequency Transformer Design for Solid-State Transformers in Electric Power Distribution Systems

    … thesis is to present a high- or medium-frequency transformer design methodology for Solid-State Transformer (SST) applications. SSTs have been proposed as a replacement of the traditional 50/60 Hz transformer in applications demanding high-power density. Moreover, due to the high penetration of …

    arkansas Repository record for High-Frequency Transformer Design for Solid-State Transformers in Electric Power Distribution Systems (opens in a new tab)

  15. Optimizing the Energy Transfer of Pulse Transformers

    Various pulse transformers were designed and tested for the purpose of quickly charging a capacitive load to a differential voltage of up to 100 kV. The first pulse charger was designed and tested to charge a 0.5 nF load to +/- 50 kV in less than 10 μs. This pulse charger was also designed to be …

    ttu Repository record for Optimizing the Energy Transfer of Pulse Transformers (opens in a new tab) Embargoed until 2031-08-01

  16. Transformer modelling for transient studies

    Transformer modelling is a concern for the utility industry. The object of this work is to develop and investigate dynamic core models suitable for transient studies. A major advantage of the core models developed here is that they use readily available transformer test data as supplied by the …

    ubc Repository record for Transformer modelling for transient studies (opens in a new tab) Download PDF for Transformer modelling for transient studies (opens in a new tab)

  17. Current-Transformer Based Gate-Drive Power Supply With Reinforced Isolation

    … design, a low input-output capacitance (CI/O) transformer design, good voltage regulation, as well as good resilience to faults to enable safe and fast operation. In this thesis, a power supply that supplies multiple gate drivers for 10 kV SiC MOSFETs is presented. A transformer design approach …

    vt Repository record for Current-Transformer Based Gate-Drive Power Supply With Reinforced Isolation (opens in a new tab)

  18. Frequency Dependence of Transformer Losses

    … effect, eddy current and magnetic hysteresis in transformers has been investigated. An electric equivalent model of a transformer based on this theory is proposed. The validity of this theory and the usefulness of the model have been tested through laboratory measurements. In these measurements …

    chalmers Repository record for Frequency Dependence of Transformer Losses (opens in a new tab)

Page 1 of 3