Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"translucent zirconia"”.
-
Fracture Strength of Translucent Zirconia Crowns
… measure and compare crown fracture load of a new translucent zirconia. Methods: 72 Standarized crown preparations were designed with AutoCAD software with a 0.8mm shoulder margin and 1 mm incisal-cervical marginal curvature. A stylized crown with a 1mm thickness and 0.8mm minimum thickness in the …
-
Low-temperature degradation and real time aging of multi-layer translucent zirconia
… and optical properties of various multilayer translucent zirconia materials featuring chroma and/or yttria gradients. Given the increasing use of multilayer zirconia in dental restorations, understanding how these materials perform under hydrothermal conditions is critical for long-term …
-
Light transmission and wear of translucent zirconia after conventional and fast sintering cycle
ABSTRACT Introduction: Zirconia is classified by the mole percentage of yttria contained in the zirconia. The most strong and opaque material contains 3 mol % yttria, intermediate strength and opacity contain 4 mol %, and whereas 5 mol % is the weakest but most translucent zirconia. Refined …
-
Effect of changes in sintering parameters on physical properties of monolithic translucent zirconia
… strength, and surface hardness of monolithic translucent zirconia.
-
Effects of sintering holding time on the microstructure and mechanical properties of translucent zirconia
… the great improvements in CAD/CAM technology, zirconiabased CAD/CAM ceramic is now widely used in dentistry. The CAD/CAM zirconia block offers the more efficient way to fabricate dental prostheses. However, the effects of sintering conditions and concomitant microstructure of zirconia-based …
-
The Difference in Fracture Strength of Translucent Zirconia (5Y-Z) Using Different Cements and Surface Treatments
Statement of Problem: With the recent advent of translucent and ultra-translucent zirconia, it is unknown if this type of high-strength ceramic restoration requires adhesive cementation to enhance retention as well as the effect of surface treatment thus its clinical applicability requires further …
-
Influence of aging on biaxial flexural strength, hardness and resin bond strength of the translucent zirconia
… and the tensile bond strength (TBS) of high translucent zirconia. For BFS, half of disc-shaped zirconia specimens were aged in an autoclave for 20h, the other half were not aged. Specimens were subjected to different surface treatments. Specimens were characterized by X-ray diffraction and …
-
Effect of changes in sintering parameters and coloring on mechanical and optical properties of translucent zirconia
… grain size, and mechanical property of various translucent zirconias. The specific aims are to compare the contrast ratio, grain size, and biaxial flexural strength of four different monolithic translucent zirconia materials using different coloring liquids. MATERIALS AND METHODS: For the test …
-
The Effect of Artificial Aging (LTD) on The Mechanical and Optical Properties of Conventional and Translucent Zirconia for Fixed Prosthodontics
In the last two decades, zirconia has been of a great interest to dentists due to its superb mechanical and optical properties. At first, the use of zirconia was limited to fabrication of cores replacing the metal in crown construction. Nowadays, there is an increase in the trend of using …
-
Influence of coloring techniques and cement opacity on the optical properties of high translucent monolithic zirconia
… of CAD/CAM technology and translucency of zirconia material, the full contour zirconia crown was introduced to offer dentists a metal free, high strength, and acceptable esthetic prosthesis option. In addition, it is claimed that it is possible to make a full contour high translucent …
-
Bond of Resin Cements Through Three Ceramics at Varying Thickness
… different types of dental ceramics (traditional zirconia with 3 mol% yttria, translucent zirconia with 5 mol% yttria, and lithium disilicate) at 2 different thicknesses. A total of 135 specimens were prepared from traditional zirconia (IPS e.max ZirCAD LT, Ivoclar Vivadent, Liechtenstein), …
-
Fracture Toughness Testing of 3, 4, and 5 mol% Yttria Stabilized Zirconia Ceramics Using the Single Edge V-notch Beam Test
1. STATEMENT OF PROBLEM: Zirconia and lithium discilicate are the most popular ceramic restorative materials today. The use of monolithic zirconia ceramics had been often limited to posterior restorations due to their opaque optical properties. Many manufacturers have developed more translucent …
-
Effect of Different Implant Abutment Materials on Optical Properties of Translucent Monolithic Zirconia Crowns
… abutment color on the final shade of monolithic translucent zirconia crowns. The null hypothesis was that abutment color or brand of zirconia would have no effect on color of monolithic translucent zirconia crowns.Material and methods: A maxillary right central incisor implant (Nobel Replace …
-
Desempenho clínico de laminados cerâmicos em zircônia ultratranslúcida: ensaio clínico controlado e randomizado
… clinical survival of ceramic laminates in ultra-translucent zirconia and the impacts of this treatment on the patient's quality of life. Materials and methods: The study was analyzed as a controlled, randomized, double-blind (patient and evaluated) clinical trial with a longitudinal character. …
-
The Mechanical Properties of Full-Contour Zirconia
… of specimens fabricated from recently marketed translucent full-contour zirconia, traditional zirconia, and lithium disilicate glass ceramic. 2. To compare the load-to-failure of crowns fabricated from recently marketed translucent full-contour zirconia, traditional zirconia, and lithium …
-
Effect of Thickness and Substrate on Color Matching with Translucent Tetragonal Zirconia
… the substrate can influence the final shade of translucent restorations. Such effect is dependent on the thickness and translucency of the restorative ceramic material. While studies have explored the effect of substrate on the final shade of silica-based ceramics, there is limited researches on …
-
Evaluation of flexural strength of multilayer zirconia under three loading configurations
OBJECTIVE: Flexural strength values of multilayer zirconia may vary depending upon the specimen dimension, layers distribution, especially the layer in maximum tension side, i.e., loading configuration. Although the previous studies have examined flexural strength of the separate layers in one …
-
Biomechanical considerations for endocrowns in restoring endodontically treated teeth
… types of all-ceramic, resin based composite and zirconia dental restorative materials through a series of systematic tests on human permanent premolars was performed. An extensive thermal and mechanical cyclic testing, static mechanical loading, micro-computed tomography analysis, scanning …
-
The effect of real time and accelerated aging on the physical and mechanical properties of YTTRIA partially stabilized zirconia
… and mechanical properties of different types of zirconia’s with various surface treatments. METHODS: In this in-vitro study 830 discs were prepared from four Y-TZP based materials. These materials were TZ-3YSB-E, ZPex®, ZPex® Smile (Tosoh Corporation, Japan), and Cercon®xt extra translucent …
-
Dental zirconia: in-vitro comparison and outcome of methods for veneering, glazing, and chipping repairs
… is to evaluate the experimental properties of zirconia-based ceramics. METHODS: Zirconia bars were veneered to 2mm total thickness. Veneering-method groups included: 1.Hand-layered feldsparthic porcelain (VM=VitaVM9,Vident) and fluorapatite glass-ceramic (CR=IPSe.maxCeram,IvoclarVivadent); …
Page 1 of 2