Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 137 for “"triaxial testing"”.
-
Digital triaxial testing system: Implementation of the digital triaxial testing system.
Abstract not available.
-
Characteristics of Dynamic Triaxial Testing of Asphalt Mixtures
… the NCHRP 9-19 project. Currently, no standard triaxial testing conditions in terms of the magnitude of the deviator and confining stresses have been specified. In addition, a repeated haversine axial compressive load pulse of 0.1 second and a rest period of 0.9 second are commonly used as part …
-
NOVEL CYCLIC TRIAXIAL TESTING ON LIQUEFACTION POTENTIAL OF SANDS
… of saturated clean sands based on cyclic triaxial testing. A discussion of complex loading on nonlinear soil behaviour using both strain-controlled and stress-controlled method is presented. To further compare soil liquefaction response between cyclic stress-based and cyclic strain-based …
-
Stress-Controlled Versus Strain-Controlled Triaxial Testing of Sand
… loading in a standard compression triaxial tests. To this end one hundred sixty-six tests were conducted involving two types of quartz sand, one fine MWSS45 and one medium coarse MWSS18 , tested at three low to intermediate confining stresses of 14 kN/m2, 28 kN/m2 and 55 kN/m2 with …
-
The development of a periodic loading apparatus for triaxial testing
… development of a periodic loading apparatus for testing soil specimens under triaxial loading conditions. To attain this objective an intensive survey of the literature has been conducted in order to evaluate the characteristics of similar apparatus developed in the past. In the light of the …
-
Characterization of Gulf of Mexico Clay Using Automated Triaxial Testing
… This thesis presents the results of SHANSEP triaxial testing performed on undisturbed samples of Gulf of Mexico clay. Background information is given about the clay, the sampling program and the laboratory testing program. The GEOTAC Truepath automated stress path triaxial apparatus …
-
Large Scale Triaxial Testing of Mechanically Stabilized Earth Retaining Wall Backfill
… to be above the No. 4 sieve, large scale triaxial testing was an option to evaluate strength and volume change parameters. This research used cylindrical specimen 6-inches in diameter and 12- inches in height in a large scale triaxial apparatus. Three types of backfill material were tested …
-
Performance of a computer-automated triaxial testing system on MLK anderten clay
… this thesis is to develop a computer-automated triaxial testing system. The validity of the system and the applicability of the programs have been evaluated and it was found that the new system can demonstrate the performance in a competent manner. It provides significant advantages over the …
-
Development of an Internal Camera-Based Volume Determination System for Triaxial Testing
… camera instrumentation located within the triaxial testing cell was developed and validated. By placing the instrumentation inside of the cell, instead of the instrumentation being located outside of the cell, the technique eliminated cumbersome corrections required to account for optical …
-
A Study of Shearing Resistance in Asphaltic Concrete by Multi-stage Triaxial Testing
… properties of asphaltic concrete. The empirical testing procedures that have been used extensively in the past have produced very little in the way of basic material properties and design data. Even though the triaxial test has not been used extensively in the past, it is recognized as the most …
-
Utilizing 3D Printed Analogue Soils to Investigate Specimen Size Effects in Triaxial Testing
Triaxial testing is one of the fundamental laboratory tests used in geotechnical engineering to determine strength parameters, such as shear strength and friction angle. Investigating the minimum representative elementary volume (REV) can verify the independence of size effects on strength …
-
Liquefaction Susceptibility of Uncemented Calcareous Sands From Puerto Rico by Cyclic Triaxial Testing
… consolidated undrained monotonic and cyclic triaxial tests were performed using the Playa Santa sand from Porto Rico. Playa Santa sand is a poorly graded calcareous clean beach sand composed of angular particles with large intra-granular voids. A series of consolidated undrained triaxial …
-
Three-Dimensional Mechanical Behavior of Kaolin Clay with Controlled Microfabric Using True Triaxial Testing
… state, a series of strain controlled true triaxial undrained tests with constant intermediate principal stress ratio (b-value) are performed on cubical specimens of Kaolin clay with controlled microfabric. The true triaxial device used in the present research has flexible boundaries and …
-
Cyclic Triaxial Testing to Evaluate Factors Affecting The Unsaturated Cyclic Behavior of a Silty Sand
… material. Two series of unsaturated cyclic triaxial tests were conducted, which varied wetting and drying path specimen preparation techniques, initial matric suction, initial net normal stress, and cyclic stress ratio. Specimens prepared using the wetting path experienced significantly …
-
A structure from motion photogrammetric method for continuously measuring and tracking the deformations of soils during triaxial testing
… soil deformation characteristics during triaxial testing is an important part of characterizing the stress-strain behavior of both saturated and unsaturated soils. The total and local deformations and volume changes of a soil specimen are indispensable parameters that need to be measured …
-
Assessment of the Behavior of Saturated Sheared Sand at Multiple Scales Using Axisymmetric Triaxial Testing and 3D X-Ray Computed Tomography
… laboratory test results, such as axisymmetric triaxial compression (ATC), to represent soils’ in-situ conditions. 3D synchrotron microcomputed tomography (SMT) allows for the acquisition of 3D particle-scale information without disturbing the material. Coupling ATC with fast 3D-SMT enables …
-
An elastic plastic approach, modeling deformation of dense sand
… and a confining pressure of 7.2 MPa in triaxial testing) and high temperatures (up to 100C). The behaviour of the dilative sand could be successfully described by using elastic plastic concepts. The triaxial testing program used modified equipment from the University of Manitoba's Soil …
-
Application of Nano-Scale Geomechanics Using PeakForce Quantitative Nano-Mechanical Mapping to Improve Hydraulic Fracture Design in Highly Heterogeneous Reservoirs
… of geomechanical properties through macro-scale testing such as true triaxial testing has been performed for decades. However, heterogeneities on a nano-scale in addition to the possibility of having non-intact samples lead to the application of nano-scale geomechanical testing. PeakForce …
-
THEORETICAL DETERMINATION OF THE YIELD CURVE FOR UNSATURATED SOILS
… based upon the results from suction-controlled triaxial (SCTX) tests. Though, the SCTX tests on unsaturated soils are costly, time-consuming, and laborious, and their results are questionable. This study intends to develop an alternative method to overcome the limitations of the SCTX tests for …
-
Shear Strength Parameters of Sand Fly Ash Cement Mixtures
… undrained, unconfined compression, and triaxial testing. Mix designs consisted of 15% fly ash with 0.5 or 1% cement, and poorly graded Ottawa sand compacted using a standard effort at 10 percent moisture content. Consolidated undrained testing on Mix 1, which included flushing and …
Page 1 of 7