Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 79 for “"turbine efficiency"”.
-
Pressure correction for intermediate-pressure steam turbine efficiency
Thesis (M.S.)--Michigan State University. Department of Mechical Engineering, 2004
-
Characterization of Cooled Turbine Efficiency for Off-Design Performance Models
Gas turbine performance modeling is essential for predicting engine behavior across design and off-design conditions. Yet the treatment of cooling or service flows remains inconsistent, as these streams interact with the main flow in complex ways and their contribution to turbine work depends on …
-
An investigation of advanced design techniques for improved mixed flow turbine efficiency
… internal combustion engine, engine brake thermal efficiency is of great importance. Turbocharging has been used for many years to facilitate an increase in specific power, and subsequent engine downsizing, which in turn is used to increase the efficiency of the engine installation. Considering the …
-
A Multi Physics Integrated Solution for a High-pressure Stage Turbine Efficiency and Durability
… prime power generating machines, gas and steam turbines have been evolving for decades. However, it is not until relatively recently that full awareness and prime focus of addressing fuel cost, plant availability and increases in RAM (Reliability, Availability & Maintainability) and most of all …
-
Experimental and Computational Analysis of an Axial Turbine Driven by Pulsing Flow
… combustion shows potential to increase the cycle efficiency of conventional gas turbine engines if used in place of the steady combustor. However, one of the challenges of integrating pressure gain combustion into a gas turbine engine is that a turbine driven by pulsing flow experiences a decrease …
-
Optimization of small-scale axial turbine for distributed compressed air energy storage system
… temperature and mass flow rate resulting in low turbine efficiency. This research aims to improve the expansion process of the small scale D-CAES system through optimization of a small scale axial turbine. A small scale axial air turbine has been developed using 1D Meanline approach and CFD …
-
Development and optimization of small-scale radial inflow turbine for waste heat recovery with organic rankine cycle
… development and optimization of radial-inflow turbines (RIT) for small-scale ORC systems. A novel methodology based on mean-line modelling, multi-level optimization and experimental study was proposed and validated for a small-scale compressed air RIT. Extending the proposed approach to organic …
-
Numerical modelling and control of an oscillating water column wave energy converter
… water to move trapped air and thus drive an air turbine. Because the incident waves and the force caused by the power take-off (PTO) interact, control of the power take off (PTO) system can increase the total energy converted. A numerical model was developed to study the interaction of an OWC …
-
Effect of Full-Annular Pressure Pulses on Axial Turbine Performance
… engines show potential to increase the efficiency of conventional gas turbine engines if used in place of the steady combustor. However, since the interaction of pressure pulses with the turbine is not yet well understood, a rig was built to compare steady flow with pulsing flow. …
-
An Investigation into the impact of the spanwise flow field at rotor inlet on the performance of mixed flow turbines
… full operating range. Therefore, turbocharger turbines must be capable of operating with high efficiency at off-design conditions, as well as possessing a low rotational inertia. One potential method to achieve this is the use of mixed flow turbines. However, compared to conventional radial …
-
The dynamics of steady supersonic dense gas flows
… Results are shown which could help improve turbine efficiency.
-
Analysis and design of a new updraft free-exit-flow low-head hydropower turbine system
… new updraft free-exit-flow low-head hydropower turbine system is designed to enhance tailrace water quality, to minimize fish mortality in turbine flow passage, to improve turbine mechanical performance, and to reduce costs and time of hydropower development. This study applies the theoretical, …
-
Design, Analysis, Optimization and Control of Rotor Tip Flows
Developments in turbomachinery focus on efficiency and reliability enhancements, while reducing the production costs. In spite of the many noteworthy experimental and numerical investigations over the past decades, the turbine tip design presents numerous challenges to the engine manufacturers, and …
-
Aerodynamic loss modelling in transonic turbines /XiuQuan Yang.
The aerodynamic design of a turbine stage starts with a mean line aerodynamic calculation that gives the stage main geometric features. A key element in that calculation is the aerodynamic loss system. The AMDCKO (Ainley and Mathieson, Dunham and Came, and Kacker and Okapuu) loss system, after …
-
A computer program for surge tank analysis
… tank) under any of the three conditions for turbine discharge (flow, gate or power variation) are possible. The surge tank geometry and system coefficients may be altered to suit any particular circumstance. Also, the program contains a procedure which allows the incorporation of a variable …
-
Simulations and validation of an axial-flow pit turbine
The geometric design of an axial-flow pit-turbine is essential as flow separation will decrease turbine efficiency. In this thesis, steady Reynolds Averaged Navier Stokes (RANS) simulations were conducted with a two-equation closure model and validated with experimental results. The research …
-
Hydrogeneration using electric sail drives: A parameter study for the geometrical optimization of marine turbines
… of the motor’s propeller on the hydrogeneration efficiency. The goal is to find out the most relevant parameters for the efficiency of a hydrogenating turbine when being optimised purely for this type of operation. The findings of this research are then discussed with respect to how they could be …
-
Investigation of Pulse Detonation Engine Flow Conditions for Turbomachinery Integration
… Integration of pressure gain combustors into gas turbine engines has been and still is one of the most important challenges facing the gas turbine industry. Pressure gain combustion devices are inherently unsteady. This unsteadiness affects turbomachinery components designed using steady operation …
-
BIMODAL FORCING OF A SHARP-EDGED IMPINGING JET WITH CONSIDERATION OF WALL COOLING
… need for reducing the fuel consumption of gas turbines/jet engines by increasing the turbine efficiency. More crucially, this would also reduce carbon emissions due to less fuel consumption, which is necessary to combat global warming. Enhancing the gas turbine efficiency can be fulfilled by …
-
In situ wake measurement behind a 25-kW freewheeling vertical axis hydrokinetic turbine in energetic riverine environment using acoustic Doppler current profiler and acoustic Doppler velocimeter
Hydrokinetic turbines present an opportunity for generating renewable energy sustainably in support of microgrids. This research examines the performance and environmental impact of a 25-kW New Energy vertical axis hydrokinetic river turbine under freewheeling conditions, focusing on flow and …
Page 1 of 4