Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"turbulators"”.
-
Experiments and simulation of shaped film cooling holes fed by crossflow with rib turbulators
… crossflow channel. In this study, angled rib turbulators were installed in two geometric configurations inside the internal crossflow channel, at 45° and 135°, to assess the impact on film cooling effectiveness. Film cooling hole inlets positioned in both pre-rib and post-rib locations tested …
-
Pressure Drop And Endwall Heat Transfer Effects Of Porous Turbulators In A Rectangular Channel
This study examines the local and averaged endwall heat transfer effects of a staggered array of porous pin fins within a rectangular channel. The porous pin fins were made from aluminum and had a pore density of 10 pores per inch (PPI). The pressure drop through the channel was also determined for …
-
Computation of heat transfer in turbine rotor blade cooling channels with angled rib turbulators
… and walls with 45 degree angled and V-shaped rib turbulators were investigated numerically using an unstructured, incompressible, Reynolds-averaged Navier-Stokes flow solver. The influence of 45 degree angled ribs and channel orientation on the local Nusselt number ratios for leading and trailing …
-
Heat Transfer And Friction Augmentation In A Narrow Rectangular Duct With Symmetrical And Non-symmetrical Wedge-shaped Turbulators
… applications, and many more. Studies introducing turbulators on walls of internal cooling channels, which can be applied to hot gas components and in recuperative heat exchangers, have been reviewed for their ability to promote heat transfer in the channel while observing pressure loss caused by …
-
Investigation into the Feasibility of Adding Turbulators to Rocket Combustion Chamber Cooling Channels Using a Conjugate Heat Transfer Analysis
… channel, to determine the feasibility of adding turbulators to the combustion chamber cooling channels at various parameters such as angle, pitch, and height of the turbulator. An existing regeneratively cooled chamber environment is simulated and used as a baseline case to be compared against. …
-
A Computational Evaluation of Turbulence Generators in Co-Axial Ground Heat Exchangers
… Alternatively, turbulence generators (turbulators) in the form of helical wings inserted inside the pipe can generate and maintain a turbulent flow even at small fluid velocities, thereby inducing higher heat transfer. However, the inclusion of helical turbulators creates obstruction in …
-
Numerical investigation of wire coil heat transfer augmentation
The enhancement of turbulance through the use of turbulators has been studied extensively in the past. The copper coil insert has been tested via experimental research which presented data sufficient enough to conclude that such turbulators would be effective when used in all high-heat load/flux …
-
Investigation into Wedge Turbulator Effects in High Aspect Ratio Cooling Channels
… In the gas turbine industry, the use of wedge turbulators has gained recognition for its heat augmentation properties with relatively low pressure drop penalty. In an ideal case, LRE's could adopt the wedge turbulator cooling technique to enhance the benefits of HARCC with minimal penalty; …
-
Convergence Effect on Heat Transfer in Gas Turbine Blade Midchord and Trailing Edge Internal Cooling Channels
… low ranges by investigating the effect of the turbulators placed on the flow path of the leading and trailing surfaces. In order to simulate the turbine blade mid-span internal cooling channel, a two-pass, straight, rectangular cross-sectional channel whose first and second passage has …
-
Heat Transfer Enhancement in Rectangular Channel with Compound Cooling Techniques
… the greatest heat transfer. Combinations of rib turbulators as well as pin0fins were used in different configurations in order to analyze heat transfer and pressure loss characteristics to determine which configuration had the overall best performance. Two different flow configurations were …
-
Heat Transfer in Stationary and Rotating Coolant Channels Using a Transient Liquid Crystal Technique
… method, multipass coolant channels with rib turbulators, large diameter radially outward channels with rib turbulators, and jet impingement cooling schemes are studied during rotation. 90deg, W, and M-shaped rib enhancements are studied and detailed heat transfer measurements clearly capture …
-
Investigation of Heat Transfer Enhancement Within a Concentric Annulus
… a concentric annular passage using helical turbulators and jet impingement. Numerical testing was used to see how the different geometric parameters affect the heat transfer and pressure drop within the annulus by using helicoil turbulators. A vast range of designs were studied by changing …
-
Experimental investigation of turbine blade platform film cooling and rotational effect on trailing edge internal cooling
… in narrow, rectangular channels with various turbulators. The present experimental investigation has shown the turbulators, coupled with the rotation induced Coriolis and buoyancy forces, result in non-uniform levels of heat transfer enhancement in the cooling channels. Advanced turbulator …
-
DESIGN OPTIMIZATION OF BRAKE ROTOR USING CFD TECHNIQUES
… Fluent. Introduction of perturbations (known as turbulators in pipe flow) in the vane region was suggested in order to increase turbulence and hence effectively increase the convective heat transfer coefficient of rotor.
-
Convection measurements in scale models of additively manufactured turbine blade cooling passages.
… artificial convective cooling enhancers such as turbulators or dimples may still be required for turbine blade and component cooling.
-
Numerical analysis of the flow in a turbulated rectangular duct simulating the cooling passages in a turbine blade
… square duct and a rectangular duct with turbulators (a form of turbulence promoters) present. The parameters varied included Reynolds numbers, turbulence intensity and grid geometry. Results for the turbulated duct indicated highly distinct and repeatable flow patterns developed over a …
-
Experimental and computational investigation of turbine cooling designs incorporating a thermal barrier coating
… cooling and internal cooling enhanced with rib turbulators separately as well as part of an integrated design incorporating a TBC. The design and construction of a matched-Biot number test section is discussed along with an evaluation of uncertainty. Enhanced internal cooling was found to …
-
Advanced impingement/film-cooling schemes for high-temperature gas turbines : numerical study
… onto the blade material. Furthermore, flow turbulators, or pedestals, are located on the path of the coolant before it exits from the hole, minimizing aerodynamic losses. Turbulence was modeled using the standard k-[varepsilon] turbulence model and two of its variants, namely the realizable …
Page 1 of 3